# 6029- HP® Printing and CorelDRAW™ 6 FAQs

The following document contains frequently asked printing questions about CorelDRAW™ 6 and
HP® printers. 

Q   Why am I getting the error "Print Overrun" when I try to send a print job?

A  This message is most often generated on computers that have HP® LaserJet printers attached.  To
resolve this, click Start, Settings, Printers.  Click the printer icon and click File, Properties, Graphics.  
Enable the Use Raster Graphics check box.  Click the Details tab, and click Spool Settings.  Change
the Spool Data Format to RAW.


Q  Why is my printer printing slowly, and sometimes generating the error "Windows could not write
to the printer spool file"?


A  To resolve this, try one of the following suggestions: 
-  Verify that the system has adequate space for temporary files and has valid temp pointers. Refer to
Fax on Demand document #2100 for more information.

-  Click File, Print, Options, Options, Special Settings.  Click Driver Banding and click Send Bands to
Driver.

-  Click File, Print, Options, Options, Special Settings.  Click Bitmap Printing and click Output Entire
Bitmap.


Q  Why do I receive "Out of Memory " errors when printing from Corel applications?

A  This condition is directly related to the amount of system resources available at the time the print
job is sent. It is essential to have adequate space on the hard drive for virtual memory expansion and
the creation of temporary files.  Refer to Fax on Demand document #2100 for more information.


Q  Why do my separations include CMYK values as well as Pantone® spot colors, when I am trying
to print an image that only contains Pantone spot colors?

A  This will occur because a CMYK object is contained somewhere in the file.  Often, the objects are
filled with spot colors, but the object outlines have been assigned a CMYK color. 
Q   Why is a gray or black box printed when printing bitmaps to my HP printer?

A  This is an issue for some HP printers. Find the driver initialization file on the hard drive (HP.INI,
DESKJET.INI), and open it in Notepad. Look for a line which reads 0JumboTechnology=0100. Alter
the line to read 0JumboTechnology=0000. Save and close the file.


Q   Why are we are receiving and "Out of Memory" error when printing from our HP DesignJet 650
and 750 plotter/printers under Windows® 95?

A  This message is generated when a driver version 2.2 is installed on the computer.  Try printing to
file or disabling the spooler in the driver properties.
 

Q  Why is an Invalid Page Fault (IPF) error generated when I try to print color separations on my
printer?

A  Check the system date.  This is done by checking the date and time settings on the Windows 95
clock. If the current year is set incorrectly, i.e. 2096, change it back to the correct setting. 


Q  What is the maximum page size I can print from CorelDRAW to the HP DesignJet Series
printers? 

A  CorelDRAW 6 is now capable of supporting page sizes to a maximum of 150 feet by 150 feet. 
Due to a limitation in the HP DesignJet 650C Series printer drivers, the maximum attainable page size
is approximately 55 by 55 inches. Larger page sizes may be attainable if the resolution in the driver is
lowered.  This limitation also applies to the HP 750C plotter, and 16-bit plotter drivers under
Windows 95.