Below are frequently asked questions about using CorelDRAW  For OS/2 installed under OS/2
For Windows  or OS/2 Warp:

Q   Why am I getting the message CORELCHT.INI  & CDRMEM.DLL cannot be found?

A   To correct this, perform the following steps:
For those using OS/2 v2.1 or v2.11 for Windows
Copy or move the following files to the partition containing Windows 3.1.  Place the first file in
the \WINDOWS directory and the second in the WINDOWS\SYSTEM directory:  

\OS2\MDOS\WINOS2\CORELCHT.INI

OS2\MDOS\WINOS2\SYSTEM\CDRMEM.DLL

For those using OS/2 WARP v3.0
Create the \OS2\MDOS\WINOS2\SYSTEM directory structure prior to installation.  Once the
install is complete, copy or move the \OS2\MDOS\WINOS2\CORELCHT.INI to the WINDOWS
directory and the \OS2\MDOS\WINOS2\SYSTEM\CDRMEM.DLL file to the WINDOWS
\SYSTEM directory.

There are some computers and devices which may experience problems when using OS/2 3.0
Warp.  Contact IBM for further assistance.

          Gateway 2000's
          Systems using the Phoenix, AMI or Micronics BIOS
          ATI Graphics Ultra Pro Video cards
          EISA systems with Adaptec 1742A controllers
          IBM PS/2s with ABIOS on the reference diskette
          IBM PS/2 Model 76
          IBM ThinkPad with a docking station
          Quantum II HardCard
          Sony, Panasonic, Creative Labs, IBM ISA, Philips, Mitsumi, BSR, Tandy NON-SCSI
     CD-ROM drives.
          Creative Labs Sound Blaster cards
          Media Vision ProAudio Spectrum 16 cards


Q    Why does the printer show  "Processing - Waiting, ..."., when I choose to print to a
PostScript device like an NEC LC-890?

A   Add to the BASEDEV=PRINT01.SYS statement in the CONFIG.SYS file the switch /IRQ. 
This returns to the OS/2 v2.11 method of print spooling.  Ensure no device is using IRQ 7. Reset
the TIME OUT to 45 seconds, and turn off Share Access.