====================================================================== Microsoft(R) Product Support Services Application Note (Text File) WA0761: MICROSOFT MAIL REBUILD.EXE VERSION 3.0.5 UPDATE ====================================================================== Revision Date: 3/93 Disk Included The following information applies to Microsoft Mail for PC Networks(R), version 3.0b. -------------------------------------------------------------------- | INFORMATION PROVIDED IN THIS DOCUMENT AND ANY SOFTWARE THAT MAY | | ACCOMPANY THIS DOCUMENT (collectively referred to as an | | Application Note) IS PROVIDED "AS IS" WITHOUT WARRANTY OF ANY | | KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING BUT NOT LIMITED TO | | THE IMPLIED WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A | | PARTICULAR PURPOSE. The user assumes the entire risk as to the | | accuracy and the use of this Application Note. This Application | | Note may be copied and distributed subject to the following | | conditions: 1) All text must be copied without modification and | | all pages must be included; 2) If software is included, all files | | on the disk(s) must be copied without modification [the MS-DOS(R) | | utility DISKCOPY is appropriate for this purpose]; 3) All | | components of this Application Note must be distributed together; | | and 4) This Application Note may not be distributed for profit. | | | | Copyright 1993 Microsoft Corporation. All Rights Reserved. | | | | Microsoft and MS-DOS are registered trademarks and Windows | | is a trademark of Microsoft Corporation. | -------------------------------------------------------------------- INTRODUCTION ------------ The disk provided with this application note contains REBUILD.EXE, a replacement for the REBUILD.EXE file that is included with Microsoft Mail for PC Networks, version 3.0b. The replacement file provides additional enhancements to the original REBUILD.EXE file, resolving a problem that occurs when using the Mail for Windows Name Finder to search the Global Address List (GAL). With the earlier version of this file, the Name Finder does not always find the correct names because of the way the GAL index is built. TO REPLACE YOUR REBUILD.EXE FILE -------------------------------- 1. Insert the enclosed WA0761 disk in your floppy disk drive. 2. At the MS-DOS command prompt, type the following and press ENTER copy :\rebuild.exe destination where is the floppy disk drive containing the WA0761 disk and destination is the drive and directory where your REBUILD.EXE file currently resides. For example, if REBUILD.EXE is located in the MAILEXE directory on drive C and the WA0761 disk is in drive A, type the following command: copy a:\rebuild.exe c:\mailexe A message will be displayed stating: "1 file(s) copied." This indicates that your REBUILD.EXE file has been successfully replaced.