SCRIPT/VS 4.0.0: DEVICE 1403N6 CHARS MONO ¤     Program Directory for  Enhanced AFP Conversion & Indexing Facility  for use with OnDemand for AIX   Program Number 5622-662   FMID HQN2220   for Use with  MVS   Document Date: June 1996        xxxx-yyyy-zz ¤   ÚÄÄÄ NOTE! ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | |  | Before using this information and the product it supports, be sure |  | to read the general information under "Notices" on page v. |  | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ            This program directory, dated June 1996, applies to Enhanced AFP  Conversion & Indexing Facility (Enhanced ACIF) for OnDemand for AIX,  Program Number 5622-662 for the following:  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  ¿ ¿  | FMIDS | FEATURE NUMBERS| SYSTEM NAME |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | |  | HQN2220 | 5038 | MVS |  | | 5130 | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  À À  A form for reader's comments appears at the back of this publication.  When you send information to IBM, you grant IBM a nonexclusive right  to use or distribute the information in any way it believes  appropriate without incurring any obligation to you.  (C) COPYRIGHT INTERNATIONAL BUSINESS MACHINES CORPORATION 1993, 1996.  ALL RIGHTS RESERVED.  Note to U.S. Government Users ÄÄ Documentation related to restricted  rights ÄÄ Use, duplication or disclosure is subject to restrictions  set forth in GSA ADP Schedule Contract with IBM Corp. ¤   CONTENTS    NOTICES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . V  Trademarks and Service Marks . . . . . . . . . . . . . . . . . . v  1.0 INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . 1  1.1 Enhanced ACIF Description . . . . . . . . . . . . . . . . . 2  2.0 PROGRAM MATERIALS . . . . . . . . . . . . . . . . . . . . . 3  2.1 Basic Machine-Readable Material . . . . . . . . . . . . . . 3  2.2 Optional Machine-Readable Material . . . . . . . . . . . . . 4  2.3 Program Publications . . . . . . . . . . . . . . . . . . . . 4  2.3.1 Basic Program Publications . . . . . . . . . . . . . . . 4  2.3.2 Optional Program Publications . . . . . . . . . . . . . 4  2.4 Microfiche Support . . . . . . . . . . . . . . . . . . . . . 5  2.5 Publications Useful During Installation . . . . . . . . . . 5  3.0 PROGRAM SUPPORT . . . . . . . . . . . . . . . . . . . . . . 6  3.1 Service Instructions . . . . . . . . . . . . . . . . . . . . 6  3.2 Preventive Service Planning . . . . . . . . . . . . . . . . 6  3.3 Statement of Support Procedures . . . . . . . . . . . . . . 6  4.0 PROGRAM AND SERVICE LEVEL INFORMATION . . . . . . . . . . . 7  4.1 Program Level Information . . . . . . . . . . . . . . . . . 7  4.2 Service Level Information . . . . . . . . . . . . . . . . . 8  4.3 Cumulative Service Tape . . . . . . . . . . . . . . . . . . 8  5.0 INSTALLATION REQUIREMENTS AND CONSIDERATIONS . . . . . . . . 9  5.1 Driving System Requirements . . . . . . . . . . . . . . . . 9  5.1.1 Programming Requirements . . . . . . . . . . . . . . . . 9  5.1.2 DASD Storage Requirements . . . . . . . . . . . . . . . 9  5.2 Target System Requirements . . . . . . . . . . . . . . . . . 9  5.2.1 Operating System Requirements . . . . . . . . . . . . . 9  5.2.2 Machine Requirements . . . . . . . . . . . . . . . . . . 10  5.2.3 Programming Requirements . . . . . . . . . . . . . . . . 10  5.2.4 DASD Storage Requirements . . . . . . . . . . . . . . . 10  5.2.5 SMP/E Procedures and Data Sets . . . . . . . . . . . . . 12  5.2.6 Special Considerations . . . . . . . . . . . . . . . . . 13  6.0 INSTALLATION INSTRUCTIONS . . . . . . . . . . . . . . . . . 14  6.1 Installing Enhanced ACIF . . . . . . . . . . . . . . . . . . 14  6.1.1 Unload Sample JCL . . . . . . . . . . . . . . . . . . . 14  6.1.2 Target and Distribution Library DDDEFs . . . . . . . . . 16  6.1.3 Allocate Target and Distribution Libraries . . . . . . . 18  6.1.4 Load SMP/E Libraries Using RECEIVE . . . . . . . . . . . 20  6.1.5 RECEIVE Cumulative Service Tape, if Applicable . . . . . 21  6.1.6 Perform SMP/E APPLY CHECK . . . . . . . . . . . . . . . 22  6.1.7 Load Target Libraries Using APPLY . . . . . . . . . . . 22  6.1.8 Perform SMP/E ACCEPT CHECK . . . . . . . . . . . . . . . 23  6.1.9 Load Distribution Libraries Using ACCEPT . . . . . . . . 24   (C) Copyright IBM Corp. 1993, 1996 iii ¤   6.2 Activating Enhanced ACIF . . . . . . . . . . . . . . . . . . 24  6.2.1 Update Link List in SYS1.PARMLIB (optional) . . . . . . 24  6.2.2 Enhanced ACIF Installation Verification Procedure . . . 24  6.2.3 Using Enhanced ACIF with OnDemand for AIX . . . . . . . 26  6.3 Delete Data Sets from Previous ACIF Release (Optional) . . . 26  APPENDIX A. ENHANCED ACIF INSTALL LOGIC . . . . . . . . . . . . 27  APPENDIX B. JCLIN FOR ENHANCED ACIF . . . . . . . . . . . . . . 28  READER'S COMMENTS . . . . . . . . . . . . . . . . . . . . . . . . 34    FIGURES    1. Basic Material: Program Tape . . . . . . . . . . . . . . . . 3  2. Program Tape: File Content . . . . . . . . . . . . . . . . . 3  3. Basic Material: Unlicensed Publications . . . . . . . . . . 4  4. Publications Useful During Installation . . . . . . . . . . 5  5. PSP Upgrade and Subset ID . . . . . . . . . . . . . . . . . 6  6. Component IDs . . . . . . . . . . . . . . . . . . . . . . . 6  7. Abbreviations used for the data set type . . . . . . . . . . 10  8. Storage Requirements for Target Libraries . . . . . . . . . 11  9. Storage Requirements for Distribution Libraries . . . . . . 11  10. Storage Requirements for SMP/E System Entries . . . . . . . 12  11. Sample JCL to Unload the Enhanced ACIF Sample Jobs . . . . . 15  12. JCL to Create Target and Distribution DDDEFs for Enhanced  ACIF . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16  13. Sample Allocate Job . . . . . . . . . . . . . . . . . . . . 19  14. Sample SMP/E RECEIVE Job . . . . . . . . . . . . . . . . . . 21  15. RECEIVE Job for Cumulative Service Tape . . . . . . . . . . 21  16. Sample SMP/E APPLY CHECK Job . . . . . . . . . . . . . . . . 22  17. Sample SMP/E APPLY Job . . . . . . . . . . . . . . . . . . . 23  18. Sample SMP/E ACCEPT CHECK Job . . . . . . . . . . . . . . . 23  19. Sample SMP/E ACCEPT Job . . . . . . . . . . . . . . . . . . 24  20. APKIVP Job for Enhanced ACIF IVP . . . . . . . . . . . . . . 25      Contents iv ¤   NOTICES    References in this document to IBM products, programs, or services do  not imply that IBM intends to make these available in all countries in  which IBM operates. Any reference to an IBM product, program, or  service is not intended to state or imply that only IBM's product,  program, or service may be used. Any functionally equivalent product,  program, or service that does not infringe on any of IBM's  intellectual property rights may be used instead of the IBM product,  program, or service. Evaluation and verification of operation in  conjunction with other products, except those expressly designated by  IBM, is the user's responsibility.  IBM may have patents or pending patent applications covering subject  matter in this document. The furnishing of this document does not  give you any license to these patents. You can send license  inquiries, in writing, to the  International Business Machines Corporation  IBM Director of Licensing  500 Columbus Avenue  Thornwood, New York 10594  USA   TRADEMARKS AND SERVICE MARKS  The following terms used in this document are trademarks or service  marks of IBM Corporation in the United States or other countries:  AFP IBM(R) OS/2  AIX IBMLink PSF  CBIPO MVS/ESA RETAIN  CBPDO MVS/SP System/390  The following terms used in this document are trademarks of other  companies as follows:  Windows(TM) Microsoft Corporation      (C) Copyright IBM Corp. 1993, 1996 v ¤   1.0 INTRODUCTION    This program directory is intended for the system programmer  responsible for program installation and maintenance. It contains  information concerning the material and procedures associated with the  installation of Enhanced ACIF. You should read all of this program  directory before installing the program and then keep it for future  reference.  The program directory contains the following sections:  ù 2.0, "Program Materials" on page 3 identifies the basic and  optional program materials and documentation for Enhanced ACIF.  ù 3.0, "Program Support" on page 6 describes the IBM support  available for Enhanced ACIF.  ù 4.0, "Program and Service Level Information" on page 7 lists the  APARs (program level) and PTFs (service level) incorporated into  Enhanced ACIF.  ù 5.0, "Installation Requirements and Considerations" on page 9  identifies the resources and considerations for installing and  using Enhanced ACIF.  ù 6.0, "Installation Instructions" on page 14 provides detailed  installation instructions for Enhanced ACIF. It also refers to  the publication containing the procedures for activating the  functions of Enhanced ACIF.  ù Appendix A, "Enhanced ACIF Install Logic" on page 27 provides the  install logic for Enhanced ACIF.  ù Appendix B, "JCLIN for Enhanced ACIF" on page 28 provides a  listing of the JCLIN for Enhanced ACIF.  Before installing Enhanced ACIF, read 3.2, "Preventive Service  Planning" on page 6. This section tells you how to find any updates to  the information and procedures in this program directory.  Do not use this program directory if you are installing Enhanced ACIF  with an MVS Custom-Built Installation Process Offering (CBIPO)  (5751-CS1). Instead, use the CBIPO Related Installation Materials  (RIMs) provided with the CBIPO. The CBIPO RIMs will point you to  specific sections of the program directory as required.  If you are installing Enhanced ACIF using the MVS Custom-Built Product  Delivery Offering (CBPDO) (5751-CS3), use the softcopy program  directory provided on the CBPDO tape. Your CBPDO contains a softcopy   (C) Copyright IBM Corp. 1993, 1996 1 ¤   preventive service planning (PSP) upgrade for this product. All  service and HOLDDATA for Enhanced ACIF are included on the CBPDO tape.   1.1 ENHANCED ACIF DESCRIPTION  The Enhanced AFP Conversion & Indexing Facility (Enhanced ACIF)  function of OnDemand for AIX is a tool that formats System/390 line  data according to instructions in a page definition and converts it  into an AFP data stream file. Using Enhanced ACIF, a programmer can  archive information and resources in system libraries and then  retrieve (using key fields as indexes), view (using AFP Workbench), or  print an exact duplicate of the original information.  Enhanced ACIF provides sophisticated indexing functions that allow  indexing of user data that previously could not be indexed. These  enhancements include:  ù Allows segmenting of report files into logical items, such as  bills, policies, statements, or other groups of pages. Users can  retrieve only the pages of a report file that they need.  ù Supports up to 16 indexes for each item in a report file,  providing support for complex queries while allowing users to  easily find the exact item that they need.  ù Introduces floating triggers, which allows index values to be  located in any record in the report file.           Introduction 2 ¤   2.0 PROGRAM MATERIALS    An IBM program is identified by a program number and a feature code.  The program number for OnDemand for AIX and the Enhanced ACIF function  is 5622-662.  The program announcement material describes the functions supported by  OnDemand for AIX and the Enhanced ACIF function. Ask your IBM  marketing representative for this information if you have not already  received a copy.  The following sections identify the basic and optional program  materials available with this program.   2.1 BASIC MACHINE-READABLE MATERIAL  The distribution medium for this program is 3480 cartridge or 4mm  cartridge. The cartridge contains all the programs and data needed  for installation. It is installed using SMP/E. See 6.0,  "Installation Instructions" on page 14 for more information about how  to install the program. Figure 1 describes the tape or cartridge.  Figure 2 describes the file content of the program tape or cartridge.  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | Figure 1. Basic Material: Program Tape |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | ¿ ¿ ¿ ¿ |  | | FEATURE | PHYSICAL | EXTERNAL LABEL | |  | MEDIUM | NUMBER | VOLUME | IDENTIFICATION | VOLSER |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | |  | 3480 cart. | 5038 | 1 | ONDEMAND.AIX.EACIF | QN2220 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | |  | 4MM cart. | 5130 | 1 | ONDEMAND.AIX.EACIF | QN2220 |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  À À À À  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | Figure 2 (Page 1 of 2). Program Tape: File Content |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | ¿ ¿ ¿ |  | VOLSER | FILE | DATA SET NAME | DISTLIB |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | |  | QN2220 | 1 | SMPMCS | |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | |  | | 2 | IBM.HQN2220.F1 | JCLIN |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | |  | | 3 | IBM.HQN2220.F2 | AAPKMOD1 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | |  | | 4 | IBM.HQN2220.F3 | AAPKSAM1 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | |  | | 5 | IBM.HQN2220.F4 | AAPKSAM2 |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  À À À   (C) Copyright IBM Corp. 1993, 1996 3 ¤   ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | Figure 2 (Page 2 of 2). Program Tape: File Content |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | ¿ ¿ ¿ |  | VOLSER | FILE | DATA SET NAME | DISTLIB |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | |  | | 6 | IBM.HQN2220.F5 | AAPKULIB |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | |  | | 7 | IBM.HQN2220.F6 | AAPKSAM3 |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  À À À   2.2 OPTIONAL MACHINE-READABLE MATERIAL  Enhanced ACIF has no optional machine-readable materials.   2.3 PROGRAM PUBLICATIONS  The following sections identify the basic and optional publications  for Enhanced ACIF.   2.3.1 BASIC PROGRAM PUBLICATIONS  Figure 3 identifies the basic program publications for OnDemand for  AIX. Instructions for using Enhanced ACIF with OnDemand for AIX are  contained in these publications. One copy of each of these  publications is included when you order the basic materials for  OnDemand for AIX. For additional copies, contact your IBM  representative.  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | Figure 3. Basic Material: Unlicensed Publications |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | ¿ |  | PUBLICATION TITLE | FORM NUMBER |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | |  | OnDemand for AIX: Introduction and Planning Guide | G544-5281 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | |  | OnDemand for AIX: Installation and Configuration | G544-5280 |  | Guide | |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | |  | OnDemand for AIX: Using the Administrator Interface | S544-5279 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | |  | OnDemand for AIX: Administrator's Reference | S544-5293 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | |  | OnDemand for AIX: OS/2 Client User's Guide | S544-5278 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | |  | OnDemand for AIX: Windows Client User's Guide | S544-5275 |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  À   2.3.2 OPTIONAL PROGRAM PUBLICATIONS  Enhanced ACIF has no optional publications.   Program Materials 4 ¤   2.4 MICROFICHE SUPPORT  Microfiche program listings are not provided with Enhanced ACIF.   2.5 PUBLICATIONS USEFUL DURING INSTALLATION  The publications listed in Figure 4 may be useful during the  installation of Enhanced ACIF. To order copies, contact your IBM  representative.  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | Figure 4. Publications Useful During Installation |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | ¿ |  | PUBLICATION TITLE | FORM NUMBER |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | |  | SMP/E Reference | SC28-1107 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | |  | SMP/E User's Guide | SC28-1302 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | |  | MVS/ESA V5 JCL Reference | GC28-1479 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | |  | MVS/ESA V4 JCL Reference | GC28-1654 |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  À             Program Materials 5 ¤   3.0 PROGRAM SUPPORT    This section describes the IBM support available for Enhanced ACIF.   3.1 SERVICE INSTRUCTIONS  Contact your IBM marketing representative or systems engineer (SE) for  specific information about available service instructions.   3.2 PREVENTIVE SERVICE PLANNING  If you obtained Enhanced ACIF as part of a CBPDO, there is HOLDDATA  and Preventive Service Planning (PSP) information for Enhanced ACIF on  the CBPDO tape. Before installing Enhanced ACIF, check with your IBM  Support Center or use SoftwareXcel Extended (IBMLink) to see whether  there is additional Preventive Service Planning (PSP) information that  you should know. To obtain this information, specify the following  UPGRADE and SUBSET values:  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | Figure 5. PSP Upgrade and Subset ID |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | ¿ ¿ |  | UPGRADE | SUBSET | RETAIN RELEASE |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | |  | ACIF220 | HQN2220 | 220 |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  À À  If you have received Enhanced ACIF only from IBM Software  Distribution, you should also check to see if additional PSP  information is available prior to installation.   3.3 STATEMENT OF SUPPORT PROCEDURES  Report any difficulties you have using this program to your IBM  Support Center. If an APAR is required, the Support Center will  provide the address to which any needed documentation can be sent.  Figure 6 identifies the component ID (COMPID) for Enhanced ACIF.  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | Figure 6. Component IDs |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | ¿ ¿ ¿ |  | FMID | COMPID | COMPONENT NAME | REL |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | |  | HQN2220 | 564806201 | ACIF | 220 |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  À À À   (C) Copyright IBM Corp. 1993, 1996 6 ¤   4.0 PROGRAM AND SERVICE LEVEL INFORMATION    This section identifies the program and any relevant service levels of  Enhanced ACIF. The program level refers to the APAR fixes  incorporated into the program. The service level refers to the PTFs  integrated. Information about the cumulative service tape is also  provided.   4.1 PROGRAM LEVEL INFORMATION  The following APAR fixes against previous releases of ACIF have been  incorporated into this release:  PN39451 PN57547 PN66286 PN71974  PN41826 PN57555 PN67316 PN72026  PN44241 PN58891 PN67591 PN72249  PN50104 PN60317 PN67746 PN73470  PN51229 PN60697 PN67975 PN73683  PN51925 PN61520 PN69691 PN74886  PN53621 PN61785 PN70919 PN74914  PN53710 PN62706 PN71191 PN74930  PN53970 PN63713 PN71324 PN75027  PN55008 PN64032 PN71614 PN75544  PN55288 PN64873 PN71815 PN76385  PN56431 PN64974 PN71931 PN77224  PN57157   The following PTFs contain the APAR fixes against previous releases of  ACIF. They are listed by FMID and have been incorporated into this  release:  ù FMID HQN2110  UN43866 UN62317 UN75909 UN80468  UN47897 UN62584 UN76335 UN80637  UN47898 UN64299 UN76505 UN80816  UN56430 UN65383 UN76812 UN81322  UN56866 UN66555 UN76817 UN81433  UN57483 UN67105 UN77324 UN81657  UN58647 UN67839 UN77786 UN81782  UN58768 UN68866 UN77944 UN82066  UN59731 UN70075 UN78051 UN82315  UN60091 UN71127 UN78208 UN82319  UN60300 UN71368 UN79291 UN83113  UN61596 UN74316 UN79642 UN83595  UN62288   (C) Copyright IBM Corp. 1993, 1996 7 ¤    4.2 SERVICE LEVEL INFORMATION  This is the initial release of Enhanced ACIF and no PTFs for FMID  HQN2220 are incorporated into the program tapes.   4.3 CUMULATIVE SERVICE TAPE  A cumulative service tape, containing PTFs not incorporated into this  release, might be included with this program. If you received this  product as part of a CBPDO, then there is no cumulative service tape.                Program and Service Level Information 8 ¤   5.0 INSTALLATION REQUIREMENTS AND CONSIDERATIONS    The following sections identify the system requirements for installing  and activating Enhanced ACIF. In most cases, you can install Enhanced  ACIF on a running system (target system). However, sometimes two  systems may be required. If two systems are required, then the  following terminology is used:  1. The system used to install the program (driving system)  2. The system on which the program is installed (target system).   5.1 DRIVING SYSTEM REQUIREMENTS  This section describes the environment of the driving system required  to install Enhanced ACIF.   5.1.1 PROGRAMMING REQUIREMENTS  The minimum SMP/E release required to install Enhanced ACIF is System  Modification Program Extended, Version 1, Release 8.   5.1.2 DASD STORAGE REQUIREMENTS  Enhanced ACIF uses any storage device that is supported by the  environment in which it is operating. See 5.2.4, "DASD Storage  Requirements" on page 10 for additional information about the amount  of storage required for Enhanced ACIF.   5.2 TARGET SYSTEM REQUIREMENTS  This section describes the environment of the target system required  to install and use Enhanced ACIF.   5.2.1 OPERATING SYSTEM REQUIREMENTS  Before installing Enhanced ACIF, the target operating system must be  at, or above, the following levels:  ù MVS/SP JES2 (5685-001) Version 3 Release 1.3, or  MVS/SP JES3 (5685-002) Version 3 Release 1.3  ù MVS/ESA SP JES2 (5695-047) Version 4 Release 2, or  MVS/ESA SP JES3 (5695-048) Version 4 Release 2   (C) Copyright IBM Corp. 1993, 1996 9 ¤   ù MVS/ESA SP JES2 (5655-068) Version 5 Release 1, or  MVS/ESA SP JES3 (5655-069) Version 5 Release 1.   5.2.2 MACHINE REQUIREMENTS  The target system has no special machine requirements.   5.2.3 PROGRAMMING REQUIREMENTS  To print output from Enhanced ACIF on MVS, PSF/MVS Version 2.2  (5695-040) must be installed.  To download documents from the MVS system to the OnDemand for AIX  server, MVS TCP/IP Version 3.1 (5685-083) and the MVS Download feature  of PSF/MVS are required.   5.2.4 DASD STORAGE REQUIREMENTS  Abbreviations describing the data set type are listed in Figure 7.  These abbreviations are used in Figure 8 and Figure 9.  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | Figure 7. Abbreviations used for the data set type |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | ¿ |  | ABBREVIATION | DATA SET TYPE |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | |  | NU | New data set used by only the FMIDs listed. In |  | | order to determine the correct storage needed for |  | | this data set, only the storage size given in the |  | | one table needs to be used. No other tables (or |  | | program directories) need to be referenced for the |  | | data set size. |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | |  | EU | Existing data set used by only the FMIDs listed. |  | | In order to determine the correct storage needed |  | | for this data set, only the storage size given in |  | | the one table needs to be used. No other tables |  | | (or program directories) need to be referenced for |  | | the data set size. |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  À  The following figures list the target and distribution libraries (data  sets) and their attributes required to install Enhanced ACIF.  SMP/E DDDEF entries for each data set should be created. See 6.1.2,  "Target and Distribution Library DDDEFs" on page 16 for information on  creating the DDDEFs.    Installation Requirements and Considerations 10 ¤   ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | Figure 8. Storage Requirements for Target Libraries |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | ¿ ¿ ¿ ¿ ¿ ¿ ¿ |  | | | D | R | L | | | |  | | T | S | E | R | | | NO. |  | DATA SET NAME | Y | O | C | E | | NO. | OF |  | OR | P | R | F | C | BLK | OF | DIR |  | LIBRARY NAME | E | G | M | L | SIZE | BLKS | BLKS |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | | |  | APK.ACIF.SAPKMOD1 | NU/EU | PO | U | 0 | 6144 | 128 | 1 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | | |  | APK.ACIF.SAPKSAM1 | NU/EU | PO | FB | 80 | 8800 | 4 | 1 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | | |  | APK.ACIF.SAPKSAM2 | NU/EU | PO | FB | 80 | 8800 | 2 | 1 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | | |  | APK.ACIF.SAPKSAM3 | NU/EU | PO | FBA | 200 | 8000 | 30 | 1 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | | |  | APK.ACIF.SAPKULIB | NU/EU | PO | VBM | 8205 | 8209 | 9 | 1 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | À À À À À À À |  | NOTES: |  | |  | 1. The number of blocks and directory blocks specified is 20% |  | larger than the actual minimum storage required by Enhanced |  | ACIF after the program is installed and the data sets are |  | compressed. You may wish to revise these numbers based on |  | your plans for adding additional function or service. |  | |  | 2. If required, data sets may be reblocked to a larger size. |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | Figure 9 (Page 1 of 2). Storage Requirements for Distribution |  | Libraries |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | ¿ ¿ ¿ ¿ ¿ ¿ ¿ |  | | | D | R | L | | | |  | | T | S | E | R | | | NO. |  | DATA SET NAME | Y | O | C | E | | NO. | OF |  | OR | P | R | F | C | BLK | OF | DIR |  | LIBRARY NAME | E | G | M | L | SIZE | BLKS | BLKS |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | | |  | APK.ACIF.AAPKMOD1 | NU/EU | PO | U | 0 | 6144 | 235 | 28 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | | |  | APK.ACIF.AAPKSAM1 | NU/EU | PO | FB | 80 | 8800 | 4 | 1 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | | |  | APK.ACIF.AAPKSAM2 | NU/EU | PO | FB | 80 | 8800 | 2 | 1 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | | |  | APK.ACIF.AAPKSAM3 | NU/EU | PO | FBA | 200 | 8000 | 30 | 1 |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  À À À À À À À     Installation Requirements and Considerations 11 ¤   ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | Figure 9 (Page 2 of 2). Storage Requirements for Distribution |  | Libraries |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | ¿ ¿ ¿ ¿ ¿ ¿ ¿ |  | | | D | R | L | | | |  | | T | S | E | R | | | NO. |  | DATA SET NAME | Y | O | C | E | | NO. | OF |  | OR | P | R | F | C | BLK | OF | DIR |  | LIBRARY NAME | E | G | M | L | SIZE | BLKS | BLKS |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | | |  | APK.ACIF.AAPKULIB | NU/EU | PO | VBM | 8205 | 8209 | 9 | 1 |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | À À À À À À À |  | NOTES: |  | |  | 1. The number of blocks and directory blocks specified is 20% |  | larger than the actual minimum storage required by Enhanced |  | ACIF after the program is installed and the data sets are |  | compressed. You may wish to revise these numbers based on |  | your plans for adding additional function or service. |  | |  | 2. If required, data sets may be reblocked to a larger size. |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ   5.2.5 SMP/E PROCEDURES AND DATA SETS  All SMP/E installation jobs provided assume the existence of a  cataloged procedure called SMPPROC containing all necessary DD  statements for the execution of SMP/E. SMPPROC must point to the  Consolidated Software Inventory (CSI) where you are installing  Enhanced ACIF. If your SMP/E procedure is not named "SMPPROC",  substitute your procedure name for "SMPPROC" where appropriate. If you  do not have an SMP/E procedure, you can find instructions for building  one in the SMP/E User's Guide or in the SMP/E Reference.  All of the SMP/E installation steps can be completed using the SMP/E  dialog panels. The SMPPROC procedure is not required when using the  SMP/E dialogs. The equivalent function can be accomplished through  the SMP/E dialogs.  The values shown in Figure 10 for the SMP/E global zone OPTIONS entry  are adequate for the installation of Enhanced ACIF.  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | Figure 10. Storage Requirements for SMP/E System |  | Entries |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | ¿ ¿ |  | SUB-ENTRY | VALUE | COMMENT |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | |  | DSSPACE | (50,10,25) | |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | |  | PEMAX | 2500 | Or allow to default |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  À À   Installation Requirements and Considerations 12 ¤   5.2.6 SPECIAL CONSIDERATIONS  The Enhanced ACIF function supplied with OnDemand for AIX replaces and  is downwardly compatible with the ACIF component shipped with PSF/MVS  Version 2.1.1 or higher (5695-040). Enhanced ACIF (FMID HQN2220) can  be used as a complete replacement for the ACIF component of PSF/MVS  (FMID HQN2110). If Enhanced ACIF, FMID HQN2220, is installed in the  same SMP/E zone as HQN2110, it will delete the HQN2110 level of ACIF  that shipped with PSF/MVS. If you want to keep both levels on your  system concurrently, then you should install HQN2220 into a separate  set of SMP/E zones from HQN2110.  NOTE: You may use either Enhanced ACIF, FMID HQN2220, or ACIF, FMID  HQN2110, with OnDemand for AIX. The enhanced indexing functions  provided with HQN2220 to index report data provide additional  capabilities not available with HQN2110.  NOTE: Enhanced ACIF is also available with the Report Management and  Distribution System (RMDS) Version 2.2, 5648-048. If you have  installed HQN2220 with RMDS, you do not need to reinstall it. The  content is identical.              Installation Requirements and Considerations 13 ¤   6.0 INSTALLATION INSTRUCTIONS    This chapter describes the installation method and the step-by-step  procedures to install and to activate the functions of Enhanced ACIF.  If you obtained Enhanced ACIF as part of a CBPDO, you can use the  RCVPDO job found in the CBPDO RIMLIB data set as well as any service,  HOLDDATA, or preventive service planning (PSP) information included on  the CBPDO tape. For more information, refer to the MVS CBPDO Memo to  User Extension included with the CBPDO.  This release of Enhanced ACIF is installed using the SMP/E RECEIVE,  APPLY, and ACCEPT commands.  In the sample SMP/E jobs shown, the global zone name in the SMP/E CSI  is GLOBAL. The distribution zone name is dlibzone. The target zone  name is tgtzone. If your installation does not use these zone names,  the sample jobs should be updated to reflect the zone names used at  your installation.   6.1 INSTALLING ENHANCED ACIF  The following steps are described in this section.  1. Unload sample JCL  2. Define DDDEFs  3. Allocate target and distribution libraries  4. Receive Enhanced ACIF  5. Perform APPLY CHECK  6. Load target libraries using APPLY  7. Perform ACCEPT CHECK  8. Load distribution libraries using ACCEPT   6.1.1 UNLOAD SAMPLE JCL  Sample jobs are provided on the Enhanced ACIF tape to help install  Enhanced ACIF.  Use the JCL shown in Figure 11 on page 15 to unload the sample jobs  from file "IBM.HQN2220.F3" on the Enhanced ACIF tape.   (C) Copyright IBM Corp. 1993, 1996 14 ¤   If the sample jobs are unloaded into a data set with a different name  from APK.jcllib, all future references in this directory to APK.jcllib  should be replaced with that new name.  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | |  | //UNLOAD JOB 'account #','name',MSGLEVEL=(1,1) |  | //STEP1 EXEC PGM=IEBCOPY |  | //SYSPRINT DD SYSOUT=* |  | //* |  | //*----------------------------------------------------------- |  | //* UNLOAD SAMPLE JOBS FROM TAPE. |  | //* NOTE: CHANGE tape TO A VALID NAME FOR A TAPE DRIVE. |  | //* CHANGE vvvvvv TO A VALID VOLSER. |  | //* CHANGE APK.jcllib TO A VALID DATA SET NAME |  | //* FOR YOUR INSTALLATION. |  | //*----------------------------------------------------------- |  | //* |  | //INTAPE DD DSNAME=IBM.HQN2220.F3,DISP=(OLD,KEEP), |  | // UNIT=(tape,,DEFER), |  | // LABEL=(4,SL), |  | // VOL=SER=QN2220 |  | //OUTDISK DD DSNAME=APK.jcllib,DISP=(NEW,CATLG,DELETE), |  | // UNIT=SYSDA,SPACE=(TRK,(5,1,3)),VOL=SER=vvvvvv |  | //SYSUT3 DD UNIT=SYSDA,SPACE=(TRK,(30,5)),DISP=(NEW,DELETE) |  | //SYSUT4 DD UNIT=SYSDA,SPACE=(TRK,(30,5)),DISP=(NEW,DELETE) |  | //SYSIN DD * |  | COPY OUTDD=OUTDISK,INDD=INTAPE |  | /* |  | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  Figure 11. Sample JCL to Unload the Enhanced ACIF Sample Jobs  When this job is submitted, the following sample jobs to install  Enhanced ACIF are put into the APK.jcllib data set:  APKJAC Sample ACCEPT job  APKJACCK Sample ACCEPT CHECK job  APKJALOC Sample job to allocate target and distribution  libraries  APKJAP Sample APPLY job  APKJAPCK Sample APPLY CHECK job  APKJDDEF Sample job to define SMP/E DDDEFs  APKJRCV Sample RECEIVE job  APKJRCVC Sample RECEIVE job for cumulative service   Installation Instructions 15 ¤   6.1.2 TARGET AND DISTRIBUTION LIBRARY DDDEFS  SMP/E DDDEF entries for each target and distribution library data set  should be defined at this time, if not already done.  A sample job to define the DDDEFs can be found in  APK.jcllib(APKJDDEF). The APKJDDEF job is shown in Figure 12 on  page 16. Modify the sample job to specify the appropriate parameters  for your installation, using the comments in the job as a guide.  If the target and distribution data sets that correspond to the DDDEFS  will be cataloged, the UNIT and VOLUME parameters should be deleted  before the job is run. See 6.1.3, "Allocate Target and Distribution  Libraries" on page 18 for information on allocating the target and  distribution data sets.  NOTE: SMP/E dialog panels may be used to define these DDDEFs instead  of the JCL.  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | |  | //APKJDDEF JOB 'acct. no.','name',MSGLEVEL=(1,1) |  | //DDDEF EXEC SMPPROC |  | //* |  | //************************************************* |  | //* ALLOCATE SMP/E DDDEFS FOR ACIF. |  | //* MODIFY THE tgtzone, dlibzone, tunit, tvol, |  | //* dunit AND dvol NAMES IN LOWER CASE AS |  | //* APPROPRIATE FOR YOUR INSTALLATION. |  | //* THE DISTRIBUTION LIBRARY DDDEFS ARE DEFINED |  | //* TO THE TARGET ZONE FOR RESTORE PURPOSES. |  | //************************************************* |  | //SMP.SMPCNTL DD * |  | SET BDY(tgtzone) . |  | UCLIN . |  | REP DDDEF(SAPKMOD1) |  | DATASET(APK.ACIF.SAPKMOD1) |  | UNIT(tunit) VOLUME(tvol) |  | OLD . |  | REP DDDEF(SAPKSAM1) |  | DATASET(APK.ACIF.SAPKSAM1) |  | UNIT(tunit) VOLUME(tvol) |  | OLD . |  | REP DDDEF(SAPKSAM2) |  | DATASET(APK.ACIF.SAPKSAM2) |  | UNIT(tunit) VOLUME(tvol) |  | OLD . |  | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  Figure 12 (Part 1 of 3). JCL to Create Target and Distribution DDDEFs  for Enhanced ACIF    Installation Instructions 16 ¤   ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | |  | REP DDDEF(SAPKSAM3) |  | DATASET(APK.ACIF.SAPKSAM3) |  | UNIT(tunit) VOLUME(tvol) |  | OLD . |  | REP DDDEF(SAPKULIB) |  | DATASET(APK.ACIF.SAPKULIB) |  | UNIT(tunit) VOLUME(tvol) |  | OLD . |  | REP DDDEF(AAPKMOD1) |  | DATASET(APK.ACIF.AAPKMOD1) |  | UNIT(dunit) VOLUME(dvol) |  | OLD . |  | REP DDDEF(AAPKSAM1) |  | DATASET(APK.ACIF.AAPKSAM1) |  | UNIT(dunit) VOLUME(dvol) |  | OLD . |  | REP DDDEF(AAPKSAM2) |  | DATASET(APK.ACIF.AAPKSAM2) |  | UNIT(dunit) VOLUME(dvol) |  | OLD . |  | REP DDDEF(AAPKSAM3) |  | DATASET(APK.ACIF.AAPKSAM3) |  | UNIT(dunit) VOLUME(dvol) |  | OLD . |  | REP DDDEF(AAPKULIB) |  | DATASET(APK.ACIF.AAPKULIB) |  | UNIT(dunit) VOLUME(dvol) |  | OLD . |  | ENDUCL. |  | SET BDY(dlibzone) . |  | UCLIN . |  | REP DDDEF(AAPKMOD1) |  | DATASET(APK.ACIF.AAPKMOD1) |  | UNIT(dunit) VOLUME(dvol) |  | OLD . |  | REP DDDEF(AAPKSAM1) |  | DATASET(APK.ACIF.AAPKSAM1) |  | UNIT(dunit) VOLUME(dvol) |  | OLD . |  | REP DDDEF(AAPKSAM2) |  | DATASET(APK.ACIF.AAPKSAM2) |  | UNIT(dunit) VOLUME(dvol) |  | OLD . |  | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  Figure 12 (Part 2 of 3). JCL to Create Target and Distribution DDDEFs  for Enhanced ACIF    Installation Instructions 17 ¤   ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | |  | REP DDDEF(AAPKSAM3) |  | DATASET(APK.ACIF.AAPKSAM3) |  | UNIT(dunit) VOLUME(dvol) |  | OLD . |  | REP DDDEF(AAPKULIB) |  | DATASET(APK.ACIF.AAPKULIB) |  | UNIT(dunit) VOLUME(dvol) |  | OLD . |  | ENDUCL . |  | /* |  | // |  | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  Figure 12 (Part 3 of 3). JCL to Create Target and Distribution DDDEFs  for Enhanced ACIF  A return code of "4" and the message GIM27701W should be received from  this JCL if the DDDEFs have never been created. A return code of "0"  should be received if the DDDEFs were created previously and the  APKJDDEF job is rerun.   6.1.3 ALLOCATE TARGET AND DISTRIBUTION LIBRARIES  A job is included in the sample JCL to help allocate the target and  distribution data sets needed for installation. After unloading the  sample JCL, the allocation job APKJALOC will reside in APK.jcllib.  See 6.1.1, "Unload Sample JCL" on page 14 for more information on  unloading the sample JCL.  The allocation job should be edited for items such as your system job  card, unit names, and volume serial numbers. See the job commentary  in Figure 13 on page 19 to identify required changes.         Installation Instructions 18 ¤   ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | |  | //APKJALOC JOB 'account #','name',MSGLEVEL=(1,1) |  | //* |  | //*********************************************************** |  | //* ALLOCATE TARGET AND DISTRIBUTION DATA SETS FOR ACIF. * |  | //* CHANGE tuuu TO BE A VALID UNIT NAME FOR THE * |  | //* TARGET LIBRARIES. * |  | //* CHANGE tttttt TO BE A VALID VOLUME SERIAL NAME FOR * |  | //* THE TARGET LIBRARIES. * |  | //* CHANGE duuu TO BE A VALID UNIT NAME FOR THE * |  | //* DISTRIBUTION LIBRARIES. * |  | //* CHANGE dddddd TO BE A VALID VOLUME SERIAL NAME FOR * |  | //* THE DISTRIBUTION LIBRARIES. * |  | //*********************************************************** |  | //ALLOC PROC ACIFPFX='APK.ACIF', |  | // TUNIT=tuuu,TVOL=tttttt, |  | // DUNIT=duuu,DVOL=dddddd |  | //ALLOC1 EXEC PGM=IEFBR14 |  | //* |  | //*********************************************************** |  | //* ALLOCATE TARGET DATA SETS FOR ACIF. * |  | //*********************************************************** |  | //* |  | //SAPKMOD1 DD DSN=&ACIFPFX..SAPKMOD1,DISP=(NEW,CATLG), |  | // DCB=(RECFM=U,LRECL=0,BLKSIZE=6144), |  | // UNIT=&TUNIT,VOL=SER=&TVOL,SPACE=(6144,(128,13,1)) |  | //* |  | //SAPKSAM1 DD DSN=&ACIFPFX..SAPKSAM1,DISP=(NEW,CATLG), |  | // DCB=(RECFM=FB,LRECL=80,BLKSIZE=8800), |  | // UNIT=&TUNIT,VOL=SER=&TVOL,SPACE=(8800,(4,1,1)) |  | //* |  | //SAPKSAM2 DD DSN=&ACIFPFX..SAPKSAM2,DISP=(NEW,CATLG), |  | // DCB=(RECFM=FB,LRECL=80,BLKSIZE=8800), |  | // UNIT=&TUNIT,VOL=SER=&TVOL,SPACE=(8800,(2,1,1)) |  | //* |  | //SAPKSAM3 DD DSN=&ACIFPFX..SAPKSAM3,DISP=(NEW,CATLG), |  | // DCB=(RECFM=FBA,LRECL=200,BLKSIZE=8000), |  | // UNIT=&TUNIT,VOL=SER=&TVOL,SPACE=(8000,(30,3,1)) |  | //* |  | //SAPKULIB DD DSN=&ACIFPFX..SAPKULIB,DISP=(NEW,CATLG), |  | // DCB=(RECFM=VBM,LRECL=8205,BLKSIZE=8209), |  | // UNIT=&TUNIT,VOL=SER=&TVOL,SPACE=(8209,(9,1,1)) |  | //* |  | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  Figure 13 (Part 1 of 2). Sample Allocate Job     Installation Instructions 19 ¤   ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | |  | //*********************************************************** |  | //* ALLOCATE DISTRIBUTION DATA SETS FOR ACIF. * |  | //*********************************************************** |  | //* |  | //AAPKMOD1 DD DSN=&ACIFPFX..AAPKMOD1,DISP=(NEW,CATLG), |  | // DCB=(RECFM=U,LRECL=0,BLKSIZE=6144), |  | // UNIT=&DUNIT,VOL=SER=&DVOL,SPACE=(6144,(220,22,28)) |  | //* |  | //AAPKSAM1 DD DSN=&ACIFPFX..AAPKSAM1,DISP=(NEW,CATLG), |  | // DCB=(RECFM=FB,LRECL=80,BLKSIZE=8800), |  | // UNIT=&DUNIT,VOL=SER=&DVOL,SPACE=(8800,(4,1,1)) |  | //* |  | //AAPKSAM2 DD DSN=&ACIFPFX..AAPKSAM2,DISP=(NEW,CATLG), |  | // DCB=(RECFM=FB,LRECL=80,BLKSIZE=8800), |  | // UNIT=&DUNIT,VOL=SER=&DVOL,SPACE=(8800,(2,1,1)) |  | //* |  | //AAPKSAM3 DD DSN=&ACIFPFX..AAPKSAM3,DISP=(NEW,CATLG), |  | // DCB=(RECFM=FBA,LRECL=200,BLKSIZE=8000), |  | // UNIT=&DUNIT,VOL=SER=&DVOL,SPACE=(8000,(30,3,1)) |  | //* |  | //AAPKULIB DD DSN=&ACIFPFX..AAPKULIB,DISP=(NEW,CATLG), |  | // DCB=(RECFM=VBM,LRECL=8205,BLKSIZE=8209), |  | // UNIT=&DUNIT,VOL=SER=&DVOL,SPACE=(8209,(9,1,1)) |  | //* |  | //EALLOC PEND |  | //* |  | //ALLOCAT EXEC ALLOC |  | /* |  | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  Figure 13 (Part 2 of 2). Sample Allocate Job  A return code of '0' should be received from this job.   6.1.4 LOAD SMP/E LIBRARIES USING RECEIVE  Execute the SMP/E RECEIVE job to unload Enhanced ACIF data from the  install tape into the SMP/E data sets (SMPPTS and temporary data  sets).  A sample RECEIVE job can be found in APK.jcllib(APKJRCV). The APKJRCV  job is shown in Figure 14 on page 21.  NOTE: This step is bypassed if receiving the product from a CBPDO.     Installation Instructions 20 ¤   ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | |  | //APKJRCV JOB 'account #','name',MSGLEVEL=(1,1) |  | //RECEIVE EXEC SMPPROC |  | //SMP.SMPPTFIN DD DSN=SMPMCS,DISP=(OLD,KEEP), |  | // VOL=SER=QN2220,LABEL=(1,SL), |  | // UNIT=(tape,,DEFER) |  | //SMP.SMPCNTL DD * |  | SET BDY(GLOBAL). |  | RECEIVE S(HQN2220) SYSMOD . |  | /* |  | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  Figure 14. Sample SMP/E RECEIVE Job  A return code of '0' should be received from this job.   6.1.5 RECEIVE CUMULATIVE SERVICE TAPE, IF APPLICABLE  A cumulative service tape may be shipped with the product package. If  no cumulative service tape is shipped or if the product is received by  CBPDO, skip this section.  A sample job to RECEIVE the PTFs and HOLDDATA from the cumulative  service tape can be found in APK.jcllib(APKJRCVC). The APKJRCVC job  is shown in Figure 15.  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | |  | //APKJRCVC JOB 'account #','name',MSGLEVEL=(1,1) |  | //*************************************************** |  | //* RECEIVE CUMULATIVE SERVICE DATA. THE UNIT * |  | //* AND SOURCEID FIELDS MUST BE FILLED IN. * |  | //* SOURCEID IS A UNIQUE NAME THAT ASSIGNS * |  | //* A COMMON IDENTIFIER TO THE SYSMODS RECEIVED. * |  | //*************************************************** |  | //APKJRCVC EXEC SMPPROC |  | //SMPHOLD DD UNIT=tape,LABEL=(4,NL),DISP=SHR, |  | // VOL=SER=CUMTAP, |  | // DCB=(RECFM=FB,LRECL=80,BLKSIZE=7200) |  | //SMPPTFIN DD UNIT=tape,LABEL=(1,NL),DISP=SHR, |  | // VOL=SER=CUMTAP, |  | // DCB=(RECFM=FB,LRECL=80,BLKSIZE=7200) |  | //SMP.SMPCNTL DD * |  | SET BDY(GLOBAL). |  | RECEIVE SYSMODS HOLDDATA SOURCEID(sssssss). |  | /* |  | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  Figure 15. RECEIVE Job for Cumulative Service Tape  A return code of "0" should be received from this job.   Installation Instructions 21 ¤   If any of the PTFs on the tape have a system hold by the ++HOLD SYSTEM  modification control statement with a reason ID equal to UCLIN, file 6  of the cumulative service tape will contain the UCLIN for that PTF.  The instructions for the UCLIN are contained in the cover letter of  the PTF.   6.1.6 PERFORM SMP/E APPLY CHECK  Execute the SMP/E APPLY CHECK job to determine which SYSMODs, if any,  are missing. Any missing SYSMODs should be installed before  continuing with the installation of Enhanced ACIF.  A sample APPLY CHECK job can be found in APK.jcllib(APKJAPCK). The  APKJAPCK job is shown in Figure 16.  To receive the full benefit of the SMP/E Causer SYSMOD Summary Report,  do not bypass the following on the APPLY CHECK: PRE, ID, REQ, and  IFREQ. This is because the SMP/E root cause analysis identifies the  cause only of ERRORS and not of WARNINGS (SYSMODs that are bypassed  are treated as warnings, not errors, by SMP/E).  The GROUPEXTEND operand indicates that SMP/E apply all requisite  SYSMODs. The requisite SYSMODS might be applicable to other  functions.  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | |  | //APKJAPCK JOB 'account #','name',MSGLEVEL=(1,1) |  | //APPLY EXEC SMPPROC |  | //SMP.SMPCNTL DD * |  | SET BDY(tgtzone). |  | APPLY CHECK S(HQN2220) |  | BYPASS(HOLDSYS,HOLDUSER,HOLDCLASS(UCLREL,ERREL)) |  | GROUPEXTEND. |  | /* |  | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  Figure 16. Sample SMP/E APPLY CHECK Job  A return code of '0' should be received from this job. Resolve any  error messages before continuing with the APPLY step.   6.1.7 LOAD TARGET LIBRARIES USING APPLY  Execute SMP/E to load the target libraries from the SMP/E temporary  data sets.  A sample APPLY job can be found in APK.jcllib(APKJAP). The APKJAP job  is shown in Figure 17 on page 23.    Installation Instructions 22 ¤   ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | |  | //APKJAP JOB 'account #','name',MSGLEVEL=(1,1) |  | //APPLY EXEC SMPPROC |  | //SMP.SMPCNTL DD * |  | SET BDY(tgtzone). |  | APPLY S(HQN2220) |  | BYPASS(HOLDCLASS(UCLREL,ERREL)) |  | GROUPEXTEND. |  | /* |  | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  Figure 17. Sample SMP/E APPLY Job  A return code of '0' should be received from this job.   6.1.8 PERFORM SMP/E ACCEPT CHECK  Execute the SMP/E ACCEPT CHECK job to determine which SYSMODs, if any,  are missing. Any missing SYSMODs should be installed before  continuing with the installation of Enhanced ACIF.  A sample ACCEPT CHECK job can be found in APK.jcllib(APKJACCK). The  APKJACCK job is shown in Figure 18.  To receive the full benefit of the SMP/E Causer SYSMOD Summary Report,  do not bypass the following on the ACCEPT CHECK: PRE, ID, REQ, and  IFREQ. This is because the SMP/E root cause analysis identifies the  cause only of ERRORS and not of WARNINGS (SYSMODs that are bypassed  are treated as warnings, not errors, by SMP/E).  The GROUPEXTEND operand indicates that SMP/E accept all requisite  SYSMODs. The requisite SYSMODS might be applicable to other  functions.  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | |  | //APKJACCK JOB 'account #','name',MSGLEVEL=(1,1) |  | //ACCEPT EXEC SMPPROC |  | //SMP.SMPCNTL DD * |  | SET BDY(dlibzone). |  | ACCEPT CHECK S(HQN2220) |  | BYPASS(HOLDSYS,HOLDUSER,HOLDCLASS(UCLREL,ERREL)) |  | GROUPEXTEND. |  | /* |  | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  Figure 18. Sample SMP/E ACCEPT CHECK Job  A return code of '0' should be received from this job. Resolve any  error messages before continuing with the ACCEPT step.   Installation Instructions 23 ¤   6.1.9 LOAD DISTRIBUTION LIBRARIES USING ACCEPT  Execute the SMP/E ACCEPT job to load the distribution libraries from  the SMP/E temporary data sets.  A sample ACCEPT job can be found in APK.jcllib(APKJAC). The APKJAC  job is shown in Figure 19 on page 24.  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | |  | //APKJAC JOB 'account #','name',MSGLEVEL=(1,1) |  | //ACCEPT EXEC SMPPROC |  | //SMP.SMPCNTL DD * |  | SET BDY(dlibzone). |  | ACCEPT S(HQN2220) |  | BYPASS(HOLDCLASS(UCLREL,ERREL)) |  | GROUPEXTEND COMPRESS(ALL). |  | /* |  | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  Figure 19. Sample SMP/E ACCEPT Job  A return code of '0' should be received from this job.   6.2 ACTIVATING ENHANCED ACIF   6.2.1 UPDATE LINK LIST IN SYS1.PARMLIB (OPTIONAL)  You may wish to add the Enhanced ACIF load library to the system link  list so that the Enhanced ACIF program can be executed without using a  steplib. To do this, update the LNKLSTxx member of SYS1.PARMLIB to  include the data set APK.ACIF.SAPKMOD1.   6.2.2 ENHANCED ACIF INSTALLATION VERIFICATION PROCEDURE  The IVP job supplied for Enhanced ACIF processes a sample bank  statement. To run the IVP, modify the APKIVP job shown in Figure 20  on page 25. This job exists in the data set  APK.ACIF.SAPKSAM2(APKIVP). Add a job card that contains the  appropriate information for your installation, then submit the job.  NOTE: The control statement input to the APKACIF program must not  contain sequence numbers in column 73-80. Message APK402S and a  return code 16 will be received if sequence numbers are included in  the input.     Installation Instructions 24 ¤   ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | |  | //APKACIF EXEC PGM=APKACIF,REGION=3M |  | //*===========================================================* |  | //* RUN APK, CREATING OUTPUT AND A RESOURCE LIBRARY * |  | //*===========================================================* |  | //STEPLIB DD DSN=APK.ACIF.SAPKMOD1,DISP=SHR |  | //INPUT DD DSN=APK.ACIF.SAPKSAM3(APKBANK),DISP=SHR |  | //SYSIN DD * |  | /* 1-up,80 lines norm dup, port, front/back offset */ |  | CC = YES /* carriage control used */ |  | CCTYPE = A /* carriage control type */ |  | CPGID = 500 /* code page identifier */ |  | FDEFLIB= APK.ACIF.SAPKULIB |  | PDEFLIB= APK.ACIF.SAPKULIB |  | FONTLIB= APK.ACIF.SAPKULIB |  | PSEGLIB= APK.ACIF.SAPKULIB |  | OVLYLIB= APK.ACIF.SAPKULIB |  | FIELD1 = 0,9,3 /* 1st field */ |  | FIELD2 = 1,50,35 /* 2nd field */ |  | FIELD3 = 3,23,8 /* 3rd field */ |  | FORMDEF = F1A18D1 /* formdef name */ |  | IMAGEOUT = ASIS /* Input image unconverted */ |  | INDEX1 = 'Report Number',field1 /* 1st index */ |  | INDEX2 = 'Report Title',field2 /* 2nd index */ |  | INDEX3 = 'Date',field3 /* 3rd index */ |  | INDEXDD= INDEX /* index file ddname */ |  | INDEXOBJ = ALL /* index level group or page */ |  | INPUTDD= INPUT /* input file ddname */ |  | OUTPUTDD = OUTPUT /* output file ddname */ |  | PAGEDEF = P1A18D /* pagedef name */ |  | RESFILE = PDS /* resource file type */ |  | RESOBJDD = RESLIB /* resource file ddname */ |  | RESTYPE = ALL /* resource type selection */ |  | TRIGGER1 = *,1,'1' /* 1st trigger */ |  | TRIGGER2 = 0,2,'REPORT' /* 2nd trigger */ |  | USERLIB= APK.ACIF.SAPKULIB |  | /* |  | //OUTPUT DD DSN=APK.ACIF.IVPSAMP.OUTPUT,DISP=(NEW,CATLG), |  | // SPACE=(32760,(150,150),RLSE),UNIT=SYSDA, |  | // DCB=(LRECL=32756,BLKSIZE=32760,RECFM=VBM,DSORG=PS) |  | //INDEX DD DSN=APK.ACIF.IVPSAMP.INDEX,DISP=(NEW,CATLG), |  | // SPACE=(32760,(15,15),RLSE),UNIT=SYSDA, |  | // DCB=(LRECL=32756,BLKSIZE=32760,RECFM=VBM,DSORG=PS) |  | //RESLIB DD DSN=APK.ACIF.IVPSAMP.RESLIB,DISP=(NEW,CATLG), |  | // SPACE=(12288,(150,15,15),RLSE),UNIT=SYSDA, |  | // DCB=(LRECL=12284,BLKSIZE=12288,RECFM=VBM,DSORG=PO) |  | //SYSPRINT DD SYSOUT=* |  | //SYSUDUMP DD SYSOUT=* |  | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  Figure 20. APKIVP Job for Enhanced ACIF IVP  This job creates the following MVS data sets:   Installation Instructions 25 ¤   ù APK.ACIF.IVPSAMP.INDEX  ù APK.ACIF.IVPSAMP.OUTPUT  ù APK.ACIF.IVPSAMP.RESLIB  The data set APK.ACIF.IVPSAMP.INDEX is a sequential file that contains  the indexes to the output data set APK.ACIF.IVPSAMP.OUTPUT.  The data set APK.ACIF.IVPSAMP.RESLIB contains the following resources:  ù C0D0GT18  ù F1A18D1  ù O1A183  ù O1A184  ù T1D0BASE  SYSPRINT contains a list of all the input parameters that are defined  in the APKIVP job, and the Enhanced ACIF default parameters. The last  statement is a message that the return code is "0". If the return  code is "0", the IVP is completed successfully.  To print the sample output data set, PSF/MVS Version 2.2 is required.  Use your installation's normal process to print documents using the  resources saved in the data set APK.ACIF.IVPSAMP.RESLIB.   6.2.3 USING ENHANCED ACIF WITH ONDEMAND FOR AIX  Refer to OnDemand for AIX: Installation and Configuration Guide,  G544-5280, for information on using Enhanced ACIF with OnDemand for  AIX.   6.3 DELETE DATA SETS FROM PREVIOUS ACIF RELEASE (OPTIONAL)  If you installed HQN2220 into the same SMP/E zone where HQN2110 was  previously installed, all SMP references to the old target and  distribution libraries were updated during the installation of  HQN2220. The data set names have changed between HQN2110 and HQN2220.  After you have finished testing, you may wish to delete the target and  distribution library data sets from HQN2110. These data sets are:  PSF.ACIF.SAPKMOD1  PSF.ACIF.SAPKSAM1  PSF.ACIF.SAPKSAM2  PSF.ACIF.SAPKSAM3  PSF.ACIF.SAPKULIB  PSF.ACIF.AAPKMOD1  PSF.ACIF.AAPKSAM1  PSF.ACIF.AAPKSAM2  PSF.ACIF.AAPKSAM3  PSF.ACIF.AAPKULIB    Installation Instructions 26 ¤   APPENDIX A. ENHANCED ACIF INSTALL LOGIC    This is the System Modification Program install logic for Enhanced  ACIF:  ++FUNCTION(HQN2220 ) REWORK(1995313 )  RFDSNPFX(IBM ) FILES(6)  /*********************************************************/  /* */  /* 5648-048 (C) COPYRIGHT IBM CORP. */  /* 1993,1995 */  /* */  /* ALL RIGHTS RESERVED */  /* */  /* US GOVERNMENT USERS RESTRICTED RIGHTS */  /* - USE, DUPLICATION OR DISCLOSURE */  /* RESTRICTED BY GSA ADP SCHEDULE */  /* CONTRACT BY IBM. */  /* */  /* LICENSED MATERIALS - PROPERTY OF IBM */  /* */  /* */  /*********************************************************/  .  ++VER(Z038 ) DELETE(HQN2110) SUP(HQN2110).  ++JCLIN RELFILE(1) .  If you ordered Enhanced ACIF as an individual feature tape (not in  CBIPO or CBPDO), you can obtain the entire set of SMP/E modification  control statements for the installation by printing the first file of  the Enhanced ACIF program tape.         (C) Copyright IBM Corp. 1993, 1996 27 ¤   APPENDIX B. JCLIN FOR ENHANCED ACIF    The JCLIN for Enhanced ACIF follows.  //LINKACIF JOB MSGLEVEL=(0,1)  //***********************************************************  //*  //* THIS JOB LINKEDITS THE ACIF PROGRAM INTO APK.ACIF.SAPKMOD1  //*  //***********************************************************  //STEP1 EXEC PGM=IEWL,  // PARM='MAP,RENT,AMODE=31,RMODE=24,LIST,LET,XREF,AC=0',  // REGION=512K  //SYSUT1 DD UNIT=SYSDA,SPACE=(CYL,(4,1))  //SYSPRINT DD SYSOUT=A  //SYSLMOD DD DSN=APK.ACIF.SAPKMOD1,DISP=SHR  //AAPKMOD1 DD DSN=APK.ACIF.AAPKMOD1,DISP=SHR  //SYSLIN DD *  INCLUDE AAPKMOD1(APKABKAX)  INCLUDE AAPKMOD1(APKACIF)  INCLUDE AAPKMOD1(APKAFPAZ)  INCLUDE AAPKMOD1(APKALCAX)  INCLUDE AAPKMOD1(APKBLPAZ)  INCLUDE AAPKMOD1(APKBNGAZ)  INCLUDE AAPKMOD1(APKBNGEX)  INCLUDE AAPKMOD1(APKBPGEX)  INCLUDE AAPKMOD1(APKBPPAZ)  INCLUDE AAPKMOD1(APKBRSEX)  INCLUDE AAPKMOD1(APKBUFAZ)  INCLUDE AAPKMOD1(APKCFIEX)  INCLUDE AAPKMOD1(APKCFTEZ)  INCLUDE AAPKMOD1(APKCF2AZ)  INCLUDE AAPKMOD1(APKCLEAR)  INCLUDE AAPKMOD1(APKCLSAX)  INCLUDE AAPKMOD1(APKCMPAZ)  INCLUDE AAPKMOD1(APKCNTAZ)  INCLUDE AAPKMOD1(APKCONAZ)  INCLUDE AAPKMOD1(APKCPGEZ)  INCLUDE AAPKMOD1(APKCPLAZ)  INCLUDE AAPKMOD1(APKCP2AZ)  INCLUDE AAPKMOD1(APKCRSAX)  INCLUDE AAPKMOD1(APKCS2AZ)  INCLUDE AAPKMOD1(APKCVTAZ)  INCLUDE AAPKMOD1(APKDCSAZ)  INCLUDE AAPKMOD1(APKDLCAX)  INCLUDE AAPKMOD1(APKDMGAZ)  INCLUDE AAPKMOD1(APKDOCEX)  INCLUDE AAPKMOD1(APKDRSAX)  INCLUDE AAPKMOD1(APKEAGAZ)  INCLUDE AAPKMOD1(APKELPAZ)   (C) Copyright IBM Corp. 1993, 1996 28 ¤   INCLUDE AAPKMOD1(APKENCAZ)  INCLUDE AAPKMOD1(APKENGAZ)  INCLUDE AAPKMOD1(APKENGEX)  INCLUDE AAPKMOD1(APKENVAZ)  INCLUDE AAPKMOD1(APKEPGEX)  INCLUDE AAPKMOD1(APKEPPAZ)  INCLUDE AAPKMOD1(APKFBKAX)  INCLUDE AAPKMOD1(APKFCHEK)  INCLUDE AAPKMOD1(APKFCLOS)  INCLUDE AAPKMOD1(APKFCSEZ)  INCLUDE AAPKMOD1(APKFDFEZ)  INCLUDE AAPKMOD1(APKFDPAZ)  INCLUDE AAPKMOD1(APKFOPEN)  INCLUDE AAPKMOD1(APKFPLAZ)  INCLUDE AAPKMOD1(APKFRD)  INCLUDE AAPKMOD1(APKFTIEX)  INCLUDE AAPKMOD1(APKFWRT)  INCLUDE AAPKMOD1(APKGRNEX)  INCLUDE AAPKMOD1(APKGRTLX)  INCLUDE AAPKMOD1(APKGRT2X)  INCLUDE AAPKMOD1(APKIBPAZ)  INCLUDE AAPKMOD1(APKIMGAZ)  INCLUDE AAPKMOD1(APKINMAZ)  INCLUDE AAPKMOD1(APKINPEX)  INCLUDE AAPKMOD1(APKINVAZ)  INCLUDE AAPKMOD1(APKIPOEX)  INCLUDE AAPKMOD1(APKIPSEX)  INCLUDE AAPKMOD1(APKIXAAX)  INCLUDE AAPKMOD1(APKIXCAX)  INCLUDE AAPKMOD1(APKIXIAX)  INCLUDE AAPKMOD1(APKIXMAX)  INCLUDE AAPKMOD1(APKIXSAX)  INCLUDE AAPKMOD1(APKIXTAX)  INCLUDE AAPKMOD1(APKLCCAZ)  INCLUDE AAPKMOD1(APKLDXAX)  INCLUDE AAPKMOD1(APKMALOL)  INCLUDE AAPKMOD1(APKMAPAZ)  INCLUDE AAPKMOD1(APKMAPST)  INCLUDE AAPKMOD1(APKMCFEX)  INCLUDE AAPKMOD1(APKMC2AZ)  INCLUDE AAPKMOD1(APKMEGAZ)  INCLUDE AAPKMOD1(APKMFMAX)  INCLUDE AAPKMOD1(APKMFREE)  INCLUDE AAPKMOD1(APKMGMAX)  INCLUDE AAPKMOD1(APKMMOEX)  INCLUDE AAPKMOD1(APKMMSAX)  INCLUDE AAPKMOD1(APKMPSEX)  INCLUDE AAPKMOD1(APKMSGEX)  INCLUDE AAPKMOD1(APKMSTXT)  INCLUDE AAPKMOD1(APKOAEEX)  INCLUDE AAPKMOD1(APKOCAAZ)  INCLUDE AAPKMOD1(APKOCREZ)  INCLUDE AAPKMOD1(APKOEXIT)  INCLUDE AAPKMOD1(APKOSTAZ)   Appendix B. JCLIN for Enhanced ACIF 29 ¤   INCLUDE AAPKMOD1(APKOUTAX)  INCLUDE AAPKMOD1(APKOUTEX)  INCLUDE AAPKMOD1(APKOVLEZ)  INCLUDE AAPKMOD1(APKPDFEZ)  INCLUDE AAPKMOD1(APKPDPAZ)  INCLUDE AAPKMOD1(APKPLNAZ)  INCLUDE AAPKMOD1(APKPOSAZ)  INCLUDE AAPKMOD1(APKPRB2D)  INCLUDE AAPKMOD1(APKPRCDB)  INCLUDE AAPKMOD1(APKPRFEZ)  INCLUDE AAPKMOD1(APKPRH2C)  INCLUDE AAPKMOD1(APKPRINI)  INCLUDE AAPKMOD1(APKPRMAX)  INCLUDE AAPKMOD1(APKPRPAZ)  INCLUDE AAPKMOD1(APKPRTBX)  INCLUDE AAPKMOD1(APKPRUPC)  INCLUDE AAPKMOD1(APKPSGEZ)  INCLUDE AAPKMOD1(APKRDJAX)  INCLUDE AAPKMOD1(APKRMIAX)  INCLUDE AAPKMOD1(APKRMRAX)  INCLUDE AAPKMOD1(APKRMTAX)  INCLUDE AAPKMOD1(APKRTENV)  INCLUDE AAPKMOD1(APKSFCAX)  INCLUDE AAPKMOD1(APKSFOAX)  INCLUDE AAPKMOD1(APKSFRAX)  INCLUDE AAPKMOD1(APKSFTAX)  INCLUDE AAPKMOD1(APKSFWAX)  INCLUDE AAPKMOD1(APKSHIAX)  INCLUDE AAPKMOD1(APKSMSEX)  INCLUDE AAPKMOD1(APKSRAAX)  INCLUDE AAPKMOD1(APKSRIAX)  INCLUDE AAPKMOD1(APKSSGAX)  INCLUDE AAPKMOD1(APKSTGEX)  INCLUDE AAPKMOD1(APKSTMAZ)  INCLUDE AAPKMOD1(APKSUSAX)  INCLUDE AAPKMOD1(APKTIMAX)  INCLUDE AAPKMOD1(APKTLEAZ)  INCLUDE AAPKMOD1(APKTLEEX)  INCLUDE AAPKMOD1(APKTLXAZ)  INCLUDE AAPKMOD1(APKTRCEX)  INCLUDE AAPKMOD1(APKUPPER)  INCLUDE AAPKMOD1(APKXCMAX)  INCLUDE AAPKMOD1(APKXLNAX)  ORDER APKACIF  ORDER APKRTENV  ORDER APKCLSAX  ORDER APKCRSAX  ORDER APKDRSAX  ORDER APKLDXAX  ORDER APKRMIAX  ORDER APKRMTAX  ORDER APKSHIAX  ORDER APKSMSEX  ORDER APKXCMAX   Appendix B. JCLIN for Enhanced ACIF 30 ¤   ORDER APKXLNAX  ORDER APKABKAX  ORDER APKFBKAX  ORDER APKIXIAX  ORDER APKSRIAX  ORDER APKIXTAX  ORDER APKMFMAX  ORDER APKPRMAX  ORDER APKRDJAX  ORDER APKSSGAX  ORDER APKTRCEX  ORDER APKGRTLX  ORDER APKGRT2X  ORDER APKMMSAX  ORDER APKTIMAX  ORDER APKALCAX  ORDER APKBPGEX  ORDER APKDLCAX  ORDER APKEPGEX  ORDER APKINPEX  ORDER APKIXSAX  ORDER APKIXCAX  ORDER APKIXAAX  ORDER APKIXMAX  ORDER APKOUTEX  ORDER APKOUTAX  ORDER APKRMRAX  ORDER APKSFCAX  ORDER APKSFWAX  ORDER APKSTGEX  ORDER APKSTMAZ  ORDER APKSUSAX  ORDER APKBLPAZ  ORDER APKCP2AZ  ORDER APKELPAZ  ORDER APKFCLOS  ORDER APKFPLAZ  ORDER APKFWRT  ORDER APKMEGAZ  ORDER APKSFRAX  ORDER APKSRAAX  ORDER APKAFPAZ  ORDER APKBNGAZ  ORDER APKMC2AZ  ORDER APKMFREE  ORDER APKTLEAZ  ORDER APKBNGEX  ORDER APKCFIEX  ORDER APKCLEAR  ORDER APKDOCEX  ORDER APKENGEX  ORDER APKFCHEK  ORDER APKFOPEN  ORDER APKFRD   Appendix B. JCLIN for Enhanced ACIF 31 ¤   ORDER APKUPPER  ENTRY APKACIF  NAME APKACIF(R)  /*                   Appendix B. JCLIN for Enhanced ACIF 32 ¤                      33 ¤   READER'S COMMENTS    PROGRAM DIRECTORY FOR ENHANCED AFP CONVERSION & INDEXING FACILITY,  5622-662  You may use this form to comment about this document, its  organization, or subject matter with the understanding that IBM may  use or distribute whatever information you supply in any way it  believes appropriate without incurring any obligation to you.  For each of the topics below please indicate your satisfaction level  by circling your choice from the rating scale. If a statement does  not apply, please circle N.  ÚÄÄÄ RATING SCALE ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | |  | very very not |  | satisfied <=====================> dissatisfied applicable |  | 1 2 3 4 5 N |  | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  ¿  | | SATISFACTION |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | ¿ ¿ ¿ ¿ ¿ |  | Ease of product installation | 1 | 2 | 3 | 4 | 5 | N |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | |  | Contents of program directory | 1 | 2 | 3 | 4 | 5 | N |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | |  | Installation Verification Programs | 1 | 2 | 3 | 4 | 5 | N |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | |  | Time to install the product | 1 | 2 | 3 | 4 | 5 | N |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | |  | Readability and organization of program | 1 | 2 | 3 | 4 | 5 | N |  | directory tasks | | | | | | |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | |  | Necessity of all installation tasks | 1 | 2 | 3 | 4 | 5 | N |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | |  | Accuracy of the definition of the | 1 | 2 | 3 | 4 | 5 | N |  | installation tasks | | | | | | |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | |  | Technical level of the installation | 1 | 2 | 3 | 4 | 5 | N |  | tasks | | | | | | |  ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿  | | | | | | | |  | Ease of getting the system into | 1 | 2 | 3 | 4 | 5 | N |  | production after installation | | | | | | |  ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ  À À À À À À  How did you order this product?   (C) Copyright IBM Corp. 1993, 1996 34 ¤   __ CBIPO  __ CBPDO  __ Independent  __ Other   Is this the first time your organization has installed this product?  __ Yes  __ No   Were the people who did the installation experienced with the  installation of MVS products?  __ Yes  __ No   If yes, how many years? __  If you have any comments to make about your ratings above, or any  other aspect of the product installation, please list them below:  ____________________________________________________________  ____________________________________________________________  ____________________________________________________________  ____________________________________________________________  ____________________________________________________________  ____________________________________________________________  ____________________________________________________________  ____________________________________________________________  ____________________________________________________________  ____________________________________________________________  ____________________________________________________________  ____________________________________________________________    Reader's Comments 35 ¤   Please provide the following contact information:  ____________________________________________________________  Name and Job Title  ____________________________________________________________  Organization  ____________________________________________________________  ____________________________________________________________  Address  ____________________________________________________________  Telephone  Thank you for your participation.  Please send the completed form to (or give to your IBM representative  who will forward it to the Enhanced AFP Conversion & Indexing Facility  Development group):  IBM Printing Systems Company  Attention: Dept. DME/003G  Box 1900  Boulder, CO 80301-9191  USA             Reader's Comments 36 ¤   IBM   Program Number: 5622-662 5038  5130  Printed in U.S.A.