Command Reference

REGISTER

Registers the DB2 server in the network directory server.

Authorization

None

Required Connection

None

Command Syntax

>>-REGISTER----+-----------------+---+-| NWBINDERY path |-+----><
               '-DB2 SERVER--IN--'   '-| LDAP path |------'
 
NWBINDERY path
 
|---NWBINDERY--USER--username--+---------------------+----------|
                               '-PASSWORD--password--'
 
LDAP path
 
|---LDAP AS--nodename------------------------------------------->
 
>----PROTOCOL--+-TCPIP--+---------------------+---+---------------------+---+-------------------+-+>
               |        '-HOSTNAME--hostname--'   '-SVCENAME--svcename--'   '-SECURITY--SOCKS---' |
               +-NETBIOS--+---------------+-------------------------------------------------------+
               |          '-NNAME--nname--'                                                       |
               +-| APPN path |--------------------------------------------------------------------+
               +-IPXSPX--+-----------------------+------------------------------------------------+
               |         '-IPX_ADDRESS--ipxaddr--'                                                |
               '-NPIPE----------------------------------------------------------------------------'
 
>-----+-------------------+---+---------------------+----------->
      '-REMOTE--computer--'   '-INSTANCE--instance--'
 
>-----+------------------------+---+-------------------+-------->
      |           .-SERVER--.  |   '-WITH--"comments"--'
      '-NODETYPE--+-MPP-----+--'
                  '-DCS-----'
 
>-----+------------------------------------------+--------------|
      '-USER--username--+---------------------+--'
                        '-PASSWORD--password--'
 
APPN path
 
|---APPN---NETWORK--net_id---PARTNERLU--partner_lu-------------->
 
>-----+------------------+--MODE--mode-------------------------->
      '-TPNAME--tp_name--'
 
>-----+------------------------+---+--------------------------+->
      '-SECURITY--+-NONE----+--'   '-LANADDRESS--lan_address--'
                  +-SAME----+
                  '-PROGRAM-'
 
>-----+-------------------------------+-------------------------|
      '-CHGPWDLU--change_password_lu--'

Command Parameters

IN

Specifies the network directory server on which to register the DB2 server. Valid values are: NWBINDERY for a NetWare bindery, and LDAP for an LDAP (Lightweight Directory Access Protocol) directory server.

USER username

For NWBINDERY, this is the user ID to log into the network server. The user ID must have SUPERVISOR or Workgroup Manager security equivalence. The user name must be provided when registering in the NetWare directory server, and is the user ID to log into the NETWARE server. For LDAP, this is the user's LDAP distinguished name (DN). The LDAP user DN must have sufficient authority to create and update the object in the LDAP directory. The user name is optional when registering in LDAP. If the user's LDAP DN is not specified, the credentials of the current logon user will be used.

PASSWORD password

Account password.

AS nodename

Specify a short name to represent the DB2 server in LDAP. A node entry will be cataloged in LDAP using this node name. The client can attach to the server using this node name. The protocol associated with this LDAP node entry is specified through the PROTOCOL parameter.

PROTOCOL

Specifies the protocol type associated with the LDAP node entry. Since the database server may support more than one protocol type, this value specifies the protocol type used by the client applications. The DB2 server must be registered once per protocol. Valid values are: TCPIP, NETBIOS, APPN, IPXSPX, and NPIPE. Specify the latter to use Windows NT Named Pipe. This protocol type is only supported by DB2 servers that run on the Windows NT operating system.

HOSTNAME hostname

Specifies the TCP/IP host name (or IP address).

SVCENAME svcename

Specifies the TCP/IP service name or port number.

SECURITY SOCKS

Specifies that TCP/IP socket security is to be used.

NNAME nname

Specifies the NetBIOS workstation name.

NETWORK net_id

Specifies the APPN network ID.

PARTNERLU partner_lu

Specifies the APPN partner LU name for the DB2 server machine.

TPNAME tpname

Specifies the APPN transaction program name.

MODE mode

Specifies the APPN mode name.

SECURITY

Specifies the APPN security level. Valid values are:

NONE: Specifies that no security information is to be included in the allocation request sent to the server. This is the default security type for DB2 UDB server.
SAME: Specifies that a user name is to be included in the allocation request sent to the server, together with an indicator that the user name has been "already verified". The server must be configured to accept "already verified" security.
PROGRAM: Specifies that both a user name and a password are to be included in the allocation request sent to the server. This is the default security type for host database servers such as DB2 for MVS, DB2 for AS/400, or DB2 for VM.

LANADDRESS lan_address

Specifies the APPN network adaptor address.

CHGPWDLU change_password_lu

Specifies the name of the partner LU that is to be used when changing the password for a host database server.

IPX_ADDRESS ipxaddr

Specifies the complete IPX address. The IPX address of a system on which DB2 UDB is installed can be found by invoking the db2ipxad command. The IPX address consists of a 12-digit network address, an 8-digit node address, and a 4-digit socket number: <NetworkAddress>.<NodeAddress>.<socket>

REMOTE computer

Specifies the computer name of the machine on which the DB2 server resides. Specify this parameter only if registering a remote DB2 server in LDAP. The value must be the same as the value specified when adding the server machine to LDAP. For the Windows NT operating system, this is the NT computer name. For UNIX based systems, this is the TCP/IP host name. For OS/2, this is the value specified for the DB2SYSTEM registry variable.

INSTANCE instance

Specifies the instance name of the DB2 server. The instance name must be specified for a remote instance (that is, when a value for the REMOTE parameter has been specified).

NODETYPE

Specifies the node type for the database server. Valid values are:

SERVER: Specify the SERVER node type for a DB2 UDB Enterprise Edition server. This is the default.
MPP: Specify the MPP node type for a DB2 UDB Enterprise Edition - Extended (partitioned database) server.
DCS: Specify the DCS node type when registering a host database server; this directs the client or gateway to use DRDA as the database protocol.

WITH "comments"

Describes the DB2 server. Any comment that helps to describe the server registered in the network directory can be entered. Maximum length is 30 characters. A carriage return or a line feed character is not permitted. The comment text must be enclosed by double quotation marks.

Usage Notes

Registering a DB2 server in NWBINDERY is only relevant when using file server addressing to connect a client and a server.

Register the DB2 server once for each protocol that the server supports. For example, if the DB2 server supports both NetBIOS and TCP/IP, the REGISTER command must be invoked twice:

   db2 register db2 server in ldap as tcpnode protocol tcpip
   db2 register db2 server in ldap as nbnode protocol netbios

The REGISTER command should be issued once for each DB2 server instance to publish the server in the directory server. If the communication parameter fields are reconfigured, or the server network address changes, update the DB2 server on the network directory server.

To update the DB2 server in LDAP, use the UPDATE LDAP NODE command after the changes have been made.

To update the DB2 server in NWBINDERY, deregister the DB2 server before making the changes, then register it again after the changes have been made.

If any protocol configuration parameter is specified when registering a DB2 server locally, it will override the value specified in the database manager configuration file.

For APPN, only the TPNAME is found in the database manager configuration file. To register APPN properly, values for the following mandatory parameters must be specified: NETID, PARTNERLU, TPNAME, MODE, and SECURITY. Values for the following optional parameters can also be specified: LANADDRESS and CHGPWDLU.

The REGISTER command can only be used to register a remote DB2 server in LDAP. The computer name and the instance name of the remote server must be specified, along with the communication protocol for the remote server.

When registering a host database server, a value of DCS must be specified for the NODETYPE parameter.

DEREGISTER

UPDATE LDAP NODE.

[ Top of Page | Previous Page | Next Page | Table of Contents | Index ]

[ DB2 List of Books | Search the DB2 Books ]