OSEM for z/OS Messages

Operating System
Environment Manager
for z/OS

Messages

Version 6.0

Document Number SC31-6902-00

Preface

Limits of Liability and Disclaimer of Warranty

Trident Services and E.S.A. Software makes no warranty of any kind, expressed or implied, with regard to the programs or documentation. Trident Services and E.S.A. Software shall not be liable in any event for incidental or consequent damages in connection with or arising out of the furnishing, performance, or use of these programs.

Information in this manual is subject to change without notice and does not represent a commitment on the part of the vendor. The software described in this manual is furnished under a license agreement, and may be used or copied only in accordance with the terms of that agreement.

Copyright Notice

IBM Operating System Environment Manager (OSEM) for z/OS. Licensed materials - Property of IBM. 5799-HAX

No parts of this publication may be copied or distributed, transmitted, transcribed, stored in a retrieval system, translated into any human or computer language, or disclosed to third parties without the express written permission of IBM Corp or E.S.A. Softare.

The following are trademarks of IBM Corp:

DFHSM

DFSMS

IBM

OS/390

RACF

z/OS

The following are trademarks of Computer Associates International:

CA-ACF2

CA-TOPSECRET

CA-1

EZ-Proclib

First Edition (April 2005)

This edition applies to Operating System Environment Manager for z/OS (OSEM for z/OS) Version 6 Release 0 Modification 0 (Program Number 5799-HAX).

Preface

OS/EM System Codes and Messages

JESYSMSG (Allocation) Messages

Message Format

JESYSMSG Message Text

JESMSGLG (SYSLOG) and TSO Messages

Message Format

Error Message Module Identifier

Appendix A. $HASP Messages for Job Routing

Index

Readers's Comment Form

OS/EM System Codes and Messages

System Codes

Format

Asv-cc

sv: The SVC number in Hex (FF if no JES3 support)

cc: The user completion code

User Completion Code

Asv-0000

Explanation: An invalid return code was received from a User exit from RACF, IEFU84, or IEFU85 when the OS/EM controller routine was in SRB mode.

Source: OS$U84CN, OS$FRACN

System Action: The OS/EM controller module abends and a SVC dump is taken.

Operator Response: Contact the System Programmer

System Programmer Response: Correct the User exit that created the invalid return code. Perform an LLA REFRESH, reload the User exit with OS/EM reload facilities. Contact OS/EM support for assistance in problem resolution.

Asv-0004

Explanation: OS/EM SVC services have been requested by the OS/EM sub-system and the SVC data area in CSA/ECSA is missing.

Source: OS$SVCIF

System Action: The OS/EM SVC interface module abends and a SVC dump is taken.

Operator Response: Contact the System Programmer

System Programmer Response: Control blocks in CSA/ECSA have been overlaid. Drain the MVS system and perform an IPL. Contact OS/EM support for assistance in problem resolution.

Asv-0008

Explanation: OS/EM SVC services have been requested by the OS/EM sub-system and the SVC controller address for OS$SVCCN in the SVC data area is zero.

Source: OS$SVCIF

System Action: The OS/EM SVC interface module abends and a SVC dump is taken.

Operator Response: Contact the System Programmer

System Programmer Response: The SVC data area has been overlaid. Drain the MVS system and perform an IPL. Contact OS/EM support for assistance in problem resolution.

Asv-0012

Explanation: OS/EM SVC services have been requested by the OS/EM sub-system and the SVC table address in the SVC data area is zero.

Source: OS$SVCCN

System Action: The OS/EM SVC controller module abends and a SVC dump is taken.

Operator Response: Contact the System Programmer

System Programmer Response: The SVC data area has been overlaid. Drain the MVS system and perform an IPL. Contact OS/EM support for assistance in problem resolution.

Asv-0016

Explanation: OS/EM SVC services have been requested by the OS/EM sub-system and the original SVC address for SVC26 NOT CATALOGED 2 support, or SVC42 ATTACH used during JES2 or JES3 initialization is zero.

Source: OS$SVCCN

System Action: The OS/EM SVC controller module abends and a SVC dump is taken.

Operator Response: Contact the System Programmer

System Programmer Response: The SVC data area has been overlaid. Drain the MVS system and perform an IPL. Contact OS/EM support for assistance in problem resolution.

Asv-0020

Explanation: OS/EM has requested SRBTIMER services from MVS and the request failed. OS/EM sets an SRBTIMER to insure that User exits running in SRB mode do not go into a CPU loop and lock up the processor. The interval is 5 CPU seconds.

Source: OS$U84CN, OS$FRACN

System Action: The OS/EM SVC controller module abends and a SVC dump is taken.

Operator Response: Contact the System Programmer

System Programmer Response: The MVS operating system has been overlaid. Drain the MVS system and perform an IPL. Contact OS/EM support for assistance in problem resolution.

Asv-0024

Explanation: OS/EM SVC services have been requested by the OS/EM sub-system and the SVC mask byte in the SVC data area is zero.

Source: OS$SVCCN

System Action: The OS/EM SVC controller module abends and a SVC dump is taken.

Operator Response: Contact the System Programmer

System Programmer Response: The SVC data area has been overlaid. Drain the MVS system and perform an IPL. Contact OS/EM support for assistance in problem resolution.

Asv-0028

Explanation: OS/EM lock services have been requested by the OS/EM sub-system and the lock number passed to lock services is invalid.

Source: OS$LOCK

System Action: The OS/EM lock module abends and a SVC dump is taken.

Operator Response: Contact the System Programmer

System Programmer Response: Storage in CSA/ECSA has been overlaid. Drain the MVS system and perform an IPL. Contact OS/EM support for assistance in problem resolution.

Asv-0032

Explanation: OS/EM query services have failed on the PUTLINE macro.

Source: OS$QUERY

System Action: The OS/EM query module abends and a SVC dump is taken.

Operator Response: None

System Programmer Response: Re-issue the OS/EM QUERY command. Contact OS/EM support for assistance in problem resolution.

AFF-0036

Explanation: The OS/EM sub-system Communication Vector Table (CVT) is missing, and subsequently OS/EM does not know what its SVC number is.

Source: OS$SVCIF

System Action: The OS/EM SVC interface module abends and a SVC dump is taken.

Operator Response: None

System Programmer Response: Storage in CSA/ECSA has been overlaid. Drain the MVS system and perform an IPL. Contact OS/EM support for assistance in problem resolution.

JESYSMSG (Allocation) Messages

Message Format

OS$nnns

OS$ - Message Prefix

nnn - Message Number

s - Message severity

I - Informational

JESYSMSG Message Text

OS$285I dsn dsp VOL SER NOS=ser,ser,ser,ser,ser VOL SER NOS=ser,ser,ser

Explanation: OS/EM optional NOT CATALOGED 2 support performed the disposition requested for the dataset. The message lists five volume serial numbers per line until all the volumes are listed. A period follows the last volume serial number.

dsn: The dataset name

dsp: One of the following

DELETED - The dataset is deleted

NOT DELETED 6 - No volumes are mounted

NOT DELETED 8 - Some volumes are in error

UNCATALOGED - The dataset is Uncataloged

ser: The serial number of the volumes involved

Source: OS$0002F

System Action: Processing continues

Operator Response: None

System Programmer Response: None

User Response: None

JESMSGLG (SYSLOG) and TSO Messages

Message Format

OS$xxxnnn

OS$ - Message Prefix

xxx - Module Identifier

nnn - Message Number

Error Message Module Identifier

ID	Module
ABN	OS$ABEND OS$J2AB*
ACN	OS$ALCCN
ACT	OS$ACTRT
AIF	OS$ALCIF
ALC	OS$ALLOC OS$ALLO0 OS$ALLO1
AOD	OS$ALLOD
ASY	OS$ASYNC
ATH	OS$AUTH
B14	OS$BR14
CAL	OS$ECALL
CMD	OS$CMD
COD	OS$CODE
COM	OS$COMM
CTL	OS$CNTL
DAD	OS$DASD
DAP	OS$POOL
DB4	OS$DB401
DCN	OS$DADCN
DC1	OS$DCB1
DEL	OS$DEL
DIF	OS$DADIF
DMP	OS$DUMP
ENF	OS$ENF
EOM	OS$EOM
EOT	OS$EOT
EXR	OS$EXRTN
FIF	OS$FRAIF
FRA	OS$FRACN
FTN	OS$FRRTN
F10	OS$EFF10
GTI	OS$GETWI
GTW	OS$GETWK
HCN	OS$HSMCN
HIF	OS$HSMIF
HSM	OS$HSM OS$HSM0 OS$HSM1 OS$HSM2 OS$HSM3
HSP	OS$HJ20x
IAT	OS$INTK
ICN	OS$ISPCN
IIF	OS$ISPIF
INT	OS$INIT
IPL	OS$IPL
ISP	OS$ISPF
I16	OS$EXT16
JRS	OS$J2RES
JS#	OS$JES2
JS2	OS$JES2A OS$JES2B OS$JES2C OS$JES2D OS$JES2E OS$JES2F OS$JES2G OS$JES2H
JS3	OS$JES3
J2D	OS$J2DEL
J2E	OS$J2ESx
J2I	OS$J2ITx
J2J	OS$J2JCx
J2M	OS$J2MCx
J2R	OS$J2ERx
J2S	OS$J2SCx
J3E	OS$J3ECN
J3I	OS$J3ITF
J3S	OS$J3SVC
LD1	OS$EFLD1
LIM	OS$LIMIT
LOD	OS$LOAD
LOK	OS$LOCK
MIS	OS$MISC
NUL	OS$NUL*
OPC	OS$OPCMD
PGI	OS$PGINT
PRE	OS$PRE00
QRY	OS$QUERY
RAC	OS$RACF
RCN	OS$RACCN
RCU	OS$RACUP OS$SAFUP
RCV	OS$RCSTK
RC2	OS$RCX02
RD1	OS$RDX01
REL	OS$RELOD
RIF	OS$RACIF
RPE	OS$RPEXT
SAF	OS$SAF
SCH	OS$TSSCH
SCN	OS$SAFCN OS$SMFCN
SIF	OS$SAFIF OS$SMFIF
SMF	OS$SMF*
STM	OS$SYSTM
SVU	OS$SVCUD
S19	OS$0001I
S20	OS$00020
S22	OS$0002B
S31	OS$0003A
S34	OS$SVC34
S35	OS$0003E
S42	OS$0004B
TCN	OS$TSOCN
TEX	OS$TEXIT
THI	OS$THRDI
THT	OS$THRDT
TIF	OS$TSOIF
TPS	OS$TPSHR
TSO	OS$TSO
TSU	OS$TSOUP
UJI	OS$UJI
USI	OS$USI
USO	OS$USO
UTL	OS$UTL
UXA	OS$UXABN
UXW	OS$UXWTO
U83	OS$U83
VCN	OS$SVCCN
WTO	OS$WTO*
WTX	OS$WTOX
W21	OS$W21SD
X00	OS$J2X00 OS$XIT0*
X02	OS$J2X02
X04	OS$J2X04
X05	OS$J2X05
X06	OS$J2X06
X09	OS$J2X09
X14	OS$J2X14
X24	OS$J2X24
X28	OS$J2X28
X29	OS$J2X29
X32	OS$J2N32 OS$J2X32
X44	OS$J2X44
X49	OS$J2X49
02F	OS$0002F
1PL	OS$IPL1
2DM	OS$J2DJx OS$J2DMx
2D0	OS$J2D0x
2D1	OS$J2D1x
2D2	OS$J2D2x
2D3	OS$J2D3x
2GM	OS$J2GMx
2G2	OS$J2G2x
2G3	OS$J2G3x
2G4	OS$J2G4x
2HM	OS$J2HMx
2H0	OS$J2H0x
2H1	OS$J2H1x
2H3	OS$J2H3x
2H3	OS$J2L3x
2H4	OS$J2H4x
2H5	OS$J2H5x
2LM	OS$J2LMx
2L0	OS$J2L0x
2L1	OS$J2L1x
2L4	OS$J2L4x
2MM	OS$J2MMx
2M0	OS$J2M0x
2M1	OS$J2M1x
2M2	OS$J2M2x
2M3	OS$J2M3x
2M4	OS$J2M4x
2P1	OS$J2P1x
2P2	OS$J2P2x
2P3	OS$J2P3x
2P4	OS$J2P4x
2P5	OS$J2P5x
2P6	OS$J2P6x
2P7	OS$J2P7x
2RS	OS$J2RES
2S0	OS$J2S0x
2TP	OS$J2TPx

Message Text

OS$xxx000

(UNDEFINED MESSAGE NUMBER)

Explanation: A message has been requested from the OS$MSG program, but the message number being requested does not exist.

Source: Unknown

System Action: Processing continues.

Operator Response: None.

System Programmer Response: Contact OS/EM support for assistance in problem resolution.

OS$IPL001

OS/EM CVT SUCCESSFULLY CREATED

Explanation: During OS/EM Sub-system Initialization the OS/EM Communication Vector Table (CVT) has been created without errors.

Source: OS$IPL

System Action: The CVT has been created.

Operator Response: None.

System Programmer Response: None.

OS$IPL002

START COMMAND ISSUED FOR jjjj

Explanation: During OS/EM Sub-system Initialization the start command has been issued for the Batch TMP procedure to load OS/EM options.

jjjj: Sub-system name as defined in IEFSSN00 member in SYS1.PARMLIB.

Source: OS$IPL

System Action: START command issued.

Operator Response: None.

System Programmer Response: None.

OS$ALC003

START COMMAND FOR OS$TPSHR FAILED

Explanation: The MGCRE macro used to issue a start command for the OS$TPSHR started task received a non-zero return code.

Source: OS$ALLO1

System Action: The START command was not issued.

Operator Response: Issue the following command:

S OS$TPSHR.OS$TPSHR,SUB=MSTR

If that command fails, notify the systems programmer.

System Programmer Response: Review the system log to determine the cause of the failure.

OS$IPL003

START COMMAND FOR OSVx FAILED

Explanation: During OS/EM subsystem initialization the start command was issued for the Batch TMP procedure to load OS/EM options but has failed.

OSVx: Sub-system name as defined in IEFSSN00 member in SYS1.PARMLIB.

Source: OS$IPL

System Action: The START command was not issued.

Operator Response: None.

System Programmer Response: Review the system log to determine the cause of the failure. Initialize the OS/EM subsystem by issuing the command:

S OSVx,SUB=MSTR  where OSVx is the subsystem name defined in IEFSSN00

OS$CTL004

OS/EM CVT AT WRONG LEVEL

SVC TABLE UPDATE FAILED FOR SVC nnn RC = rr

Explanation: During OS/EM Sub-system Initialization OS$IPL has failed when issuing the SVCUPDTE macro to install the OS/EM SVC. The SVC number was specified in the IEFSSN00 member in SYS1.PARMLIB for Sub-system Initialization of OS/EM or during OS/EM automatic selection of a SVC number.

nnn: SVC Number selected for OS/EM Sub-system Initialization as specified in IEFSSN00 in SYS1.PARMLIB or during OS/EM automatic selection of a SVC number.

rr: Return code from SVCUPDTE macro.

Source: OS$IPL

System Action: OS$IPL ends with a Return Code of 16 and stops the Sub-system Initialization of OS/EM.

Operator Response: Contact Systems Programmer.

System Programmer Response: Look up the Return code displayed in the message and determine what action should be taken. Contact OS/EM support for assistance in problem resolution.

OS$SVU006

SVC TABLE UPDATE FAILED FOR SVC nnn RC = rr

nnn: SVC Number selected for OS/EM Sub-system Initialization as specified in IEFSSN00 in SYS1.PARMLIB or during OS/EM automatic selection of a SVC number.

rr: Return code from SVCUPDTE macro.

Source: OS$SVCUD

System Action: OS$IPL ends with a Return Code of 16 and stops the Sub-system Initialization of OS/EM.

Operator Response: Contact Systems Programmer.

System Programmer Response: Look up the Return code displayed in the message and determine what action should be taken. Contact OS/EM support for assistance in problem resolution.

OS$IPL007

INTERFACE MODULE program PROCESSED SUCCESSFULLY

Explanation: During OS/EM Sub-system Initialization OS$IPL has successfully loaded the interface module program. For some interface modules, this message also indicates OS/EM has also processed the pre-existing modules (e.g. IEFUTL, etc..) and updated OS/EM CVT to access these modules as the first user EXIT.

program: OS/EM interface module name

Source: OS$IPL

System Action: OS$IPL continues with OS/EM Sub-system Initialization, informational only.

Operator Response: None.

System Programmer Response: None.

OS$IPL008

PARM=zzzzzzzz

Explanation: During OS/EM Sub-system Initialization OS$IPL detected that the parm field as specified in the IEFSSN00 member in SYS1.PARMLIB is invalid, or the operator has replied to message OS$IPL010 with an invalid OS/EM Sub-system parm.

zzzzzzzz: Parm field as specified in IEFSSN00 member in SYS1.PARMLIB for OS/EM Sub-system Initialization, or as entered by the operator in response to message OS$IPL010.

Source: OS$IPL

System Action: OS$IPL issues messages OS$IPL009 and OS$IPL010 prompts the operator to enter a valid parm to be passed to OS/EM Sub-system Initialization.

Operator Response: Contact the System Programmer and reply to OS$IPL010 as instructed by the System Programmer.

System Programmer Response: Correct the IEFSSN00 member in SYS1.PARMLIB and/or instruct the operator as to the correct reply to message OS$IPL010.

OS$IPL009

PARM FIELD IS INVALID; ERROR AT OR NEAR POSITION xxx

xxx: The column position where the error is located.

Source: OS$IPL

System Action: OS$IPL issues messages OS$IPL008 and OS$IPL010 prompts the operator to enter a valid parm to be passed to OS/EM Sub-system Initialization.

Operator Response: Contact the System Programmer and reply to OS$IPL010 as instructed by the System Programmer.

System Programmer Response: Correct the IEFSSN00 member in SYS1.PARMLIB and/or instruct the operator as to the correct reply to message OS$IPL010.

OS$IPL010

REENTER PARM VALUE

Source: OS$IPL

System Action: OS$IPL issues messages OS$IPL008, OS$IPL009 and prompts the operator to enter a valid parm to be passed to OS/EM Sub-system Initialization.

Operator Response: Contact the System Programmer and reply to OS$IPL010 as instructed by the System Programmer.

System Programmer Response: Correct the IEFSSN00 member in SYS1.PARMLIB and/or instruct the operator as to the correct reply to message OS$IPL010.

OS$IPL012

EXIT program PROCESSED

Explanation: During OS/EM Sub-system Initialization, OS$IPL has successfully built the CDE entry for exit point program that points to the OS/EM interface module.

program: Exit point name being processed.

Source: OS$IPL

System Action: OS$IPL continues initialization of the OS/EM Sub-system.

Operator Response: None.

System Programmer Response: None.

OS$HSP013

LOAD ABEND aaa-rc

Explanation: Either during OS/EM Sub-system Initialization or during execution of the OS$CNTL functions in either ISPF or the batch TMP that sets OS/EM options a module was not loaded for reason aaa-rc.

aaa-rc: MVS System Code or OS/EM Pseudo Code and return code.

Source: OS$HJ20

System Action: OS/EM function being executed continues, but the program identified in other message numbers OS$xxx017, OS$xxx021, OS$xxx030 etc. is not loaded.

Operator Response: Contact System Programmer.

System Programmer Response: Pseudo abend codes are provided by OS/EM they are:

000-2 Module not suitable (OVLY or SCTR)

000-4 Module not RENT

000-5 JES2 Offset Table not available

000-6 Entry not found in module

000-7 JES2 module is an invalid format

000-8 Module is wrong version

000-9 Module is wrong JES2 version

000-A Loadlib allocation failed

000-C Loadlib open failed

000-D JES2 offset adjustment failed

000-E Module is not suitable (JES2 module in LPA)

000-F Module is not suitable (disallowed BR14)

Also see MVS System Codes, correct failing program and or situation and resubmit the command.

OS$LOD013

LOAD ABEND aaa-rc

aaa-rc: MVS System Code or OS/EM Pseudo Code and return code.

Source: OS$LOAD

System Action: OS/EM function being executed continues, but the program identified in other message numbers OS$xxx017, OS$xxx021, OS$xxx030 etc. is not loaded.

Operator Response: Contact System Programmer.

System Programmer Response: Pseudo abend codes are provided by OS/EM they are:

000-2 Module not suitable (OVLY or SCTR)

000-4 Module not RENT

000-5 JES2 Offset Table not available

000-6 Entry not found in module

000-7 JES2 module is an invalid format

000-8 Module is wrong version

000-9 Module is wrong JES2 version

000-A Loadlib allocation failed

000-C Loadlib open failed

000-D JES2 offset adjustment failed

000-E Module is not suitable (JES2 module in LPA)

000-F Module is not suitable (disallowed BR14)

Also see MVS System Codes, correct failing program and or situation and resubmit the command.

OS$S19013

LOAD ABEND aaa-rc

aaa-rc: MVS System Code or OS/EM Pseudo Code and return code.

Source: OS$0001I

System Action: OS/EM function being executed continues, but the program identified in other message numbers OS$xxx017, OS$xxx021, OS$xxx030 etc. is not loaded.

Operator Response: Contact System Programmer.

System Programmer Response: Pseudo abend codes are provided by OS/EM they are:

000-2 Module not suitable (OVLY or SCTR)

000-4 Module not RENT

000-5 JES2 Offset Table not available

000-6 Entry not found in module

000-7 JES2 module is an invalid format

000-8 Module is wrong version

000-9 Module is wrong JES2 version

000-A Loadlib allocation failed

000-C Loadlib open failed

000-D JES2 offset adjustment failed

000-E Module is not suitable (JES2 module in LPA)

000-F Module is not suitable (disallowed BR14)

Also see MVS System Codes, correct failing program and or situation and resubmit the command.

OS$S22013

LOAD ABEND aaa-rc

aaa-rc: MVS System Code or OS/EM Pseudo Code and return code.

Source: OS$0002B

System Action: OS/EM function being executed continues, but the program identified in other message numbers OS$xxx017, OS$xxx021, OS$xxx030 etc. is not loaded.

Operator Response: Contact System Programmer.

System Programmer Response: Pseudo abend codes are provided by OS/EM they are:

000-2 Module not suitable (OVLY or SCTR)

000-4 Module not RENT

000-5 JES2 Offset Table not available

000-6 Entry not found in module

000-7 JES2 module is an invalid format

000-8 Module is wrong version

000-9 Module is wrong JES2 version

000-A Loadlib allocation failed

000-C Loadlib open failed

000-D JES2 offset adjustment failed

000-E Module is not suitable (JES2 module in LPA)

000-F Module is not suitable (disallowed BR14)

Also see MVS System Codes, correct failing program and or situation and resubmit the command.

OS$LOD014

MODULE NOT SUITABLE (OVLY, SCTR, NOT RENT)

Explanation: During the execution of loading either an OS/EM module, or a user defined exit point module, the module output format from the Linkage Editor was determined not to valid.

Source: OS$LOAD

System Action: OS/EM function being executed continues, but the program identified in other message number OS$xxx017 is not loaded.

Operator Response: Contact System Programmer.

System Programmer Response: Correct Linkage Editor statements, relink the failing program, perform LLA refresh as appropriate and re-issue the OS/EM command that failed.

OS$LOD015

MODULE IS WRONG VERSION

Explanation: During the execution of loading either an OS/EM module, or a user defined exit point module, the module identified in a previous message was determined to be at different version than the version currently being executed.

Source: OS$LOAD

System Action: OS/EM function being executed continues, but the program identified in other message number OS$xxx017 is not loaded.

Operator Response: Contact System Programmer.

System Programmer Response: Check LINKLIST, STEPLIB, JOBLIB, and ISPLLIB concatenation to find bad version of module being loaded and re-issue the OS/EM command that failed.

OS$IPL016

OS/EM REQUIRES OS/390 Release 2.7 or later

Explanation: During OS/EM Sub-system Initialization OS/EM determined that the operating system OS/EM is running on is not a supported operating system release.

Source: OS$IPL

System Action: OS/EM Sub-system Initialization stops.

Operator Response: Contact System Programmer.

System Programmer Response: Check that an OS/390 or z/OS system is the target system for OS/EM Initialization. Contact OS/EM support for assistance in problem resolution.

OS$HSP017

MODULE program LOAD FAILED

Explanation: During the of loading either an OS/EM module, or a user defined exit point module, the module identified by program was not loaded.

program: The module name that OS/EM attempted to load.

Source: OS$HJ20

System Action: OS/EM function being executed continues, but the program identified is not loaded. Other messages will follow with information with information as to what caused the load to fail.

Operator Response: Contact System Programmer.

System Programmer Response: Refer to the messages following this one and take the action indicated by those messages.

OS$LOD017

MODULE program LOAD FAILED

Explanation: During the of loading either an OS/EM module, or a user defined exit point module, the module identified by program was not loaded.

program: The module name that OS/EM attempted to load.

Source: OS$LOAD

System Action: OS/EM function being executed continues, but the program identified is not loaded. Other messages will follow with information with information as to what caused the load to fail.

Operator Response: Contact System Programmer.

System Programmer Response: Refer to the messages following this one and take the action indicated by those messages.

OS$S19017

MODULE program LOAD FAILED

Explanation: During the of loading either an OS/EM module, or a user defined exit point module, the module identified by program was not loaded.

program: The module name that OS/EM attempted to load.

Source: OS$0001I

System Action: OS/EM function being executed continues, but the program identified is not loaded. Other messages will follow with information with information as to what caused the load to fail.

Operator Response: Contact System Programmer.

System Programmer Response: Refer to the messages following this one and take the action indicated by those messages.

OS$S22017

MODULE program LOAD FAILED

Explanation: During the of loading either an OS/EM module, or a user defined exit point module, the module identified by program was not loaded.

program: The module name that OS/EM attempted to load.

Source: OS$0002B

System Action: OS/EM function being executed continues, but the program identified is not loaded. Other messages will follow with information with information as to what caused the load to fail.

Operator Response: Contact System Programmer.

System Programmer Response: Refer to the messages following this one and take the action indicated by those messages.

OS$LOD018

{subsystem} MODULE program LOADED (loadaddr) {VERSION verinfo}

Explanation: During OS/EM Sub-system or optional exit module loading, module program has been loaded successfully.

subsystem: The subsystem that the module operates with (e.g. JES2)

program: Exit point name being processed.

loadaddr: The load address of the module.

verinfo: The version number and generation date & time of module. This applies only to OS/EM system modules.

Source: OS$LOAD

System Action: OS/EM continues.

Operator Response: None.

System Programmer Response: None.

OS$IPL019

program INTERCEPT FAILED. ctlfield= xxxxxxxx {yyyyyyyy}

Explanation: During OS/EM Sub-system Initialization OS/EM was unable to establish the intercept routine for program. The control blocks for intercept program were modified during OS/EM Sub-system Initialization, and OS/EM was unable to continue processing.

program The program name.

ctlfield: The name of system control block field being displayed.

xxxxxxxx: The contents of the first fullword of the displayed control field.

yyyyyyyy: The contents of the second fullword of the displayed control field (if applicable).

Source: OS$IPL

System Action: OS/EM Sub-system Initialization ends with a Return code 16.

Operator Response: Contact System Programmer.

System Programmer Response: Re-IPL. Contact OS/EM support for assistance in problem resolution.

OS$IPL020

OS$IPL ENDED - RC = nn

Explanation: During OS/EM Sub-system Initialization, OS$IPL has ended with a return code of nn.

nn Return code set by OS$IPL.

00	OS/EM Sub-system Initialization was successful.
08	One or more OS/EM modules were not successfully loaded, see previous messages for reasons.
16	OS/EM Sub-system Initialization failed, see previous messages for reasons.

Source: OS$IPL

System Action: OS$IPL has ended. If the return code is 00 or 08 OS/EM starts the batch TMP (OSV5) to set OS/EM options.

Operator Response: If the return code is a 08 or 16 contact the System Programmer.

System Programmer Response: If the return code is a 00 no action is required. If the return code is 08 one or more OS/EM modules may not have been loaded, there will be messages preceding OS$IPL020 detailing what has failed. If the return code is 16 OS/EM Sub-system Initialization has failed and there will be messages preceding OS$IPL020 detailing what has failed. Correct failing components as detailed by the preceding messages and Re-IPL. Contact OS/EM support for assistance in problem resolution.

OS$AIF021

subsystem CONTROLLER MODULE module NOT LOADED

Explanation: During OS/EM exit processing the controller module was not loaded and cannot be executed.

subsystem: The subsystem that the controller module relates to (e.g. JES2)

module: The name of the module that could not be loaded.

Source: OS$ALCIF

System Action: The OS/EM function identified by this message is not being executed. OS/EM functions continue for all other functions.

Operator Response: Contact System Programmer.

System Programmer Response: Refer to the messages preceding OS$AIF021, and take the corrective action as indicated by those messages. RELOAD the controller module that has failed. Contact OS/EM support for assistance in problem resolution.

OS$DIF021

subsystem CONTROLLER MODULE module NOT LOADED

Explanation: During OS/EM exit processing the controller module was not loaded and cannot be executed.

subsystem: The subsystem that the controller module relates to (e.g. JES2)

module: The name of the module that could not be loaded.

Source: OS$ALCIF

System Action: The OS/EM function identified by this message is not being executed. OS/EM functions continue for all other functions.

Operator Response: Contact System Programmer.

System Programmer Response: Refer to the messages preceding OS$DIF021, and take the corrective action as indicated by those messages. RELOAD the controller module that has failed. Contact OS/EM support for assistance in problem resolution.

OS$FIF021

subsystem CONTROLLER MODULE module NOT LOADED

Explanation: During OS/EM exit processing the controller module was not loaded and cannot be executed.

subsystem: The subsystem that the controller module relates to (e.g. JES2)

module: The name of the module that could not be loaded.

Source: OS$FRAIF

System Action: The OS/EM function identified by this message is not being executed. OS/EM functions continue for all other functions.

Operator Response: Contact System Programmer.

System Programmer Response: Refer to the messages preceding OS$FIF021, and take the corrective action as indicated by those messages. RELOAD the controller module that has failed. Contact OS/EM support for assistance in problem resolution.

OS$HIF021

subsystem CONTROLLER MODULE module NOT LOADED

Explanation: During OS/EM exit processing the controller module was not loaded and cannot be executed.

subsystem: The subsystem that the controller module relates to (e.g. JES2)

module: The name of the module that could not be loaded.

Source: OS$HSMIF

System Action: The OS/EM function identified by this message is not being executed. OS/EM functions continue for all other functions.

Operator Response: Contact System Programmer.

System Programmer Response: Refer to the messages preceding OS$HIF021, and take the corrective action as indicated by those messages. RELOAD the controller module that has failed. Contact OS/EM support for assistance in problem resolution.

OS$IIF021

subsystem CONTROLLER MODULE module NOT LOADED

Explanation: During OS/EM exit processing the controller module was not loaded and cannot be executed.

subsystem: The subsystem that the controller module relates to (e.g. JES2)

module: The name of the module that could not be loaded.

Source: OS$ISPIF

System Action: The OS/EM function identified by this message is not being executed. OS/EM functions continue for all other functions.

Operator Response: Contact System Programmer.

System Programmer Response: Refer to the messages preceding OS$IIF021, and take the corrective action as indicated by those messages. RELOAD the controller module that has failed. Contact OS/EM support for assistance in problem resolution.

OS$J2I021

subsystem CONTROLLER MODULE module NOT LOADED

Explanation: During OS/EM exit processing the controller module was not loaded and cannot be executed.

subsystem: The subsystem that the controller module relates to (e.g. JES2)

module: The name of the module that could not be loaded.

Source: OS$J2ITx

System Action: The OS/EM function identified by this message is not being executed. OS/EM functions continue for all other functions.

Operator Response: Contact System Programmer.

System Programmer Response: Refer to the messages preceding OS$J2I021, and take the corrective action as indicated by those messages. RELOAD the controller module that has failed. Contact OS/EM support for assistance in problem resolution.

OS$J3I021

subsystem CONTROLLER MODULE module NOT LOADED

Explanation: During OS/EM exit processing the controller module was not loaded and cannot be executed.

subsystem: The subsystem that the controller module relates to (e.g. JES2)

module: The name of the module that could not be loaded.

Source: OS$J3ITF

System Action: The OS/EM function identified by this message is not being executed. OS/EM functions continue for all other functions.

Operator Response: Contact System Programmer.

System Programmer Response: Refer to the messages preceding OS$J3I021, and take the corrective action as indicated by those messages. RELOAD the controller module that has failed. Contact OS/EM support for assistance in problem resolution.

OS$RIF021

subsystem CONTROLLER MODULE module NOT LOADED

Explanation: During OS/EM exit processing the controller module was not loaded and cannot be executed.

subsystem: The subsystem that the controller module relates to (e.g. JES2)

module: The name of the module that could not be loaded.

Source: OS$RACIF

System Action: The OS/EM function identified by this message is not being executed. OS/EM functions continue for all other functions.

Operator Response: Contact System Programmer.

System Programmer Response: Refer to the messages preceding OS$RIF021, and take the corrective action as indicated by those messages. RELOAD the controller module that has failed. Contact OS/EM support for assistance in problem resolution.

OS$SIF021

subsystem CONTROLLER MODULE module NOT LOADED

Explanation: During OS/EM exit processing the controller module was not loaded and cannot be executed.

subsystem: The subsystem that the controller module relates to (e.g. JES2)

module: The name of the module that could not be loaded.

Source: OS$SAFIF,OS$SMFIF

System Action: The OS/EM function identified by this message is not being executed. OS/EM functions continue for all other functions.

Operator Response: Contact System Programmer.

System Programmer Response: Refer to the messages preceding OS$SIF021, and take the corrective action as indicated by those messages. RELOAD the controller module that has failed. Contact OS/EM support for assistance in problem resolution.

OS$TIF021

subsystem CONTROLLER MODULE module NOT LOADED

Explanation: During OS/EM exit processing the controller module was not loaded and cannot be executed.

subsystem: The subsystem that the controller module relates to (e.g. JES2)

module: The name of the module that could not be loaded.

Source: OS$TSOIF

System Action: The OS/EM function identified by this message is not being executed. OS/EM functions continue for all other functions.

Operator Response: Contact System Programmer.

System Programmer Response: Refer to the messages preceding OS$TIF021, and take the corrective action as indicated by those messages. RELOAD the controller module that has failed. Contact OS/EM support for assistance in problem resolution.

OS$X00021

subsystem CONTROLLER MODULE module NOT LOADED

Explanation: During OS/EM exit processing the controller module was not loaded and cannot be executed.

subsystem: The subsystem that the controller module relates to (e.g. JES2)

module: The name of the module that could not be loaded.

Source: OS$XIT0x

System Action: The OS/EM function identified by this message is not being executed. OS/EM functions continue for all other functions.

Operator Response: Contact System Programmer.

System Programmer Response: Refer to the messages preceding OS$X00021, and take the corrective action as indicated by those messages. RELOAD the controller module that has failed. Contact OS/EM support for assistance in problem resolution.

OS$CTL022

UNABLE TO ESTABLISH ESTAE IN MODULE OS$CNTL - RC = nn

Explanation: During the execution of module OS$CNTL, the module OS$CNTL was unable to establish an ESTAE environment.

nn: Return code from the ESATE macro.

Source: OS$CNTL

System Action: The OS/EM module takes a SVC dump, disables the module, and deletes the module from storage. All functions related to this module are disabled.

Operator Response: Contact System Programmer.

System Programmer Response: Take the corrective action as indicated in the IBM Supervisor Services ESTAE macro reference. RELOAD the controller module using OS/EM functions. Contact Contact OS/EM support for assistance in problem resolution.

OS$DC1022

UNABLE TO ESTABLISH ESTAE IN MODULE OS$DCB1 - RC = nn

Explanation: During the execution of module OS$DCB1, the module OS$DCB1 was unable to establish an ESTAE environment.

nn: Return code from the ESATE macro.

Source: OS$DCB1

System Action: The OS/EM module takes a SVC dump, disables the module, and deletes the module from storage. All functions related to this module are disabled.

Operator Response: Contact System Programmer.

OS$IPL022

UNABLE TO ESTABLISH ESTAE IN MODULE OS$IPL - RC = nn

Explanation: During the execution of module OS$IPL, the module OS$IPL was unable to establish an ESTAE environment.

nn: Return code from the ESATE macro.

Source: OS$IPL

System Action: The OS/EM module takes a SVC dump, disables the module, and deletes the module from storage. All functions related to this module are disabled.

Operator Response: Contact System Programmer.

OS$THI022

UNABLE TO ESTABLISH ESTAE IN MODULE OS$THRDI - RC = nn

Explanation: During the execution of module OS$THRDI, the module OS$THRDI was unable to establish an ESTAE environment.

nn: Return code from the ESATE macro.

Source: OS$THRDI

System Action: The OS/EM module takes a SVC dump, disables the module, and deletes the module from storage. All functions related to this module are disabled.

Operator Response: Contact System Programmer.

OS$TPS022

UNABLE TO ESTABLISH ESTAE IN MODULE OS$TPSHR - RC = nn

Explanation: During the execution of module OS$TPSHR, the module OS$TPSHR was unable to establish an ESTAE environment.

nn: Return code from the ESATE macro.

Source: OS$TPSHR

System Action: The OS/EM module takes a SVC dump, disables the module, and deletes the module from storage. All functions related to this module are disabled.

Operator Response: Contact System Programmer.

OS$USI022

UNABLE TO ESTABLISH ESTAE IN MODULE OS$USI - RC = nn

Explanation: During the execution of module OS$USI, the module OS$USI was unable to establish an ESTAE environment.

nn: Return code from the ESATE macro.

Source: OS$USI

System Action: The OS/EM module takes a SVC dump, disables the module, and deletes the module from storage. All functions related to this module are disabled.

Operator Response: Contact System Programmer.

OS$J2M023

ABEND IN subsystem modtype (modname : entry) AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for a JES2 module either through ESTAE or FRR recovery programming.

subsystem: The name of the JES2 subsystem

modtype: The type of user module that failed

modname: The name of the failing module

entry: The entry point name for the failing module

xxxxxxxx: The location within the failing module where the ABEND occurred.

Source: OS$J2MCx

System Action: OS/EM function being executed continues, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. Other messages will follow including OS$xxx025, OS$xxx026, and OS$xxx029. The module will show in a NOT LOADED status if a QUERY is done after an ABEND.

Operator Response: Contact System Programmer.

System Programmer Response: Use IPCS to determine the cause for the ABEND, take the corrective action required, perform an LLA,REFRESH, and RELOAD the failing module using the OS/EM ISPF RELOAD facility.

OS$J2S023

ABEND IN subsystem modtype (modname : entry) AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for a JES2 module either through ESTAE or FRR recovery programming.

subsystem: The name of the JES2 subsystem

modtype: The type of user module that failed

modname: The name of the failing module

entry: The entry point name for the failing module

xxxxxxxx: The location within the failing module where the ABEND occurred.

Source: OS$J2SCx

Operator Response: Contact System Programmer.

OS$X05023

ABEND IN subsystem modtype (modname : entry) AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for a JES2 module either through ESTAE or FRR recovery programming.

subsystem: The name of the JES2 subsystem

modtype: The type of user module that failed

modname: The name of the failing module

entry: The entry point name for the failing module

xxxxxxxx: The location within the failing module where the ABEND occurred.

Source: OS$J2X05

Operator Response: Contact System Programmer.

OS$2P4023

ABEND IN subsystem modtype (modname : entry) AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for a JES2 module either through ESTAE or FRR recovery programming.

subsystem: The name of the JES2 subsystem

modtype: The type of user module that failed

modname: The name of the failing module

entry: The entry point name for the failing module

xxxxxxxx: The location within the failing module where the ABEND occurred.

Source: OS$J2P4x

Operator Response: Contact System Programmer.

OS$ACN024

ABEND IN modtype modname AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for the specified module.

modtype: The type of module that ABENDed

modtype: The name of module that had the ABENDed

xxxxxxxx: The location within the module where the ABEND occurred.

Source: OS$ALCCN

System Action: OS/EM function being executed stops, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. Other messages will accompany this including OS$xxx024, OS$xxx025, and OS$xxx029. The module will show in a NOT LOADED status if a QUERY is done after an ABEND.

Operator Response: Contact System Programmer.

OS$ASY024

ABEND IN modtype modname AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for the specified module.

modtype: The type of module that ABENDed

modtype: The name of module that had the ABENDed

xxxxxxxx: The location within the module where the ABEND occurred.

Source: OS$ASYNC

Operator Response: Contact System Programmer.

OS$COM024

ABEND IN modtype modname AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for the specified module.

modtype: The type of module that ABENDed

modtype: The name of module that had the ABENDed

xxxxxxxx: The location within the module where the ABEND occurred.

Source: OS$COMM

Operator Response: Contact System Programmer.

OS$DCN024

ABEND IN modtype modname AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for the specified module.

modtype: The type of module that ABENDed

modtype: The name of module that had the ABENDed

xxxxxxxx: The location within the module where the ABEND occurred.

Source: OS$DADCN

Operator Response: Contact System Programmer.

OS$EXR024

ABEND IN modtype modname AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for the specified module.

modtype: The type of module that ABENDed

modtype: The name of module that had the ABENDed

xxxxxxxx: The location within the module where the ABEND occurred.

Source: OS$EXRTN

Operator Response: Contact System Programmer.

OS$FCN024

ABEND IN modtype modname AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for the specified module.

modtype: The type of module that ABENDed

modtype: The name of module that had the ABENDed

xxxxxxxx: The location within the module where the ABEND occurred.

Source: OS$FRACN

Operator Response: Contact System Programmer.

OS$FTN024

ABEND IN modtype modname AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for the specified module.

modtype: The type of module that ABENDed

modtype: The name of module that had the ABENDed

xxxxxxxx: The location within the module where the ABEND occurred.

Source: OS$FRRTN

Operator Response: Contact System Programmer.

OS$HCN024

ABEND IN modtype modname AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for the specified module.

modtype: The type of module that ABENDed

modtype: The name of module that had the ABENDed

xxxxxxxx: The location within the module where the ABEND occurred.

Source: OS$HSMCN

Operator Response: Contact System Programmer.

OS$ICN024

ABEND IN modtype modname AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for the specified module.

modtype: The type of module that ABENDed

modtype: The name of module that had the ABENDed

xxxxxxxx: The location within the module where the ABEND occurred.

Source: OS$ISPCN

Operator Response: Contact System Programmer.

OS$J2M024

ABEND IN modtype modname AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for the specified module.

modtype: The type of module that ABENDed

modtype: The name of module that had the ABENDed

xxxxxxxx: The location within the module where the ABEND occurred.

Source: OS$J2MCx

Operator Response: Contact System Programmer.

OS$J2R024

ABEND IN modtype modname AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for the specified module.

modtype: The type of module that ABENDed

modtype: The name of module that had the ABENDed

xxxxxxxx: The location within the module where the ABEND occurred.

Source: OS$J2ERx

Operator Response: Contact System Programmer.

OS$J2S024

ABEND IN modtype modname AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for the specified module.

modtype: The type of module that ABENDed

modtype: The name of module that had the ABENDed

xxxxxxxx: The location within the module where the ABEND occurred.

Source: OS$J2SCx

Operator Response: Contact System Programmer.

OS$J3E024

ABEND IN modtype modname AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for the specified module.

modtype: The type of module that ABENDed

modtype: The name of module that had the ABENDed

xxxxxxxx: The location within the module where the ABEND occurred.

Source: OS$J3ECN

Operator Response: Contact System Programmer.

OS$J3S024

ABEND IN modtype modname AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for the specified module.

modtype: The type of module that ABENDed

modtype: The name of module that had the ABENDed

xxxxxxxx: The location within the module where the ABEND occurred.

Source: OS$J3SVC

Operator Response: Contact System Programmer.

OS$LOK024

ABEND IN modtype modname AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for the specified module.

modtype: The type of module that ABENDed

modtype: The name of module that had the ABENDed

xxxxxxxx: The location within the module where the ABEND occurred.

Source: OS$LOCK

Operator Response: Contact System Programmer.

OS$RCN024

ABEND IN modtype modname AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for the specified module.

modtype: The type of module that ABENDed

modtype: The name of module that had the ABENDed

xxxxxxxx: The location within the module where the ABEND occurred.

Source: OS$RACCN

Operator Response: Contact System Programmer.

OS$SCN024

ABEND IN modtype modname AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for the specified module.

modtype: The type of module that ABENDed

modtype: The name of module that had the ABENDed

xxxxxxxx: The location within the module where the ABEND occurred.

Source: OS$SAFCN,OS$SMFCN

Operator Response: Contact System Programmer.

OS$TCN024

ABEND IN modtype modname AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for the specified module.

modtype: The type of module that ABENDed

modtype: The name of module that had the ABENDed

xxxxxxxx: The location within the module where the ABEND occurred.

Source: OS$TSOCN

Operator Response: Contact System Programmer.

OS$UJI024

ABEND IN modtype modname AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for the specified module.

modtype: The type of module that ABENDed

modtype: The name of module that had the ABENDed

xxxxxxxx: The location within the module where the ABEND occurred.

Source: OS$UJI

Operator Response: Contact System Programmer.

OS$USI024

ABEND IN modtype modname AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for the specified module.

modtype: The type of module that ABENDed

modtype: The name of module that had the ABENDed

xxxxxxxx: The location within the module where the ABEND occurred.

Source: OS$USI

Operator Response: Contact System Programmer.

OS$VCN024

ABEND IN modtype modname AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for the specified module.

modtype: The type of module that ABENDed

modtype: The name of module that had the ABENDed

xxxxxxxx: The location within the module where the ABEND occurred.

Source: OS$SVCCN

Operator Response: Contact System Programmer.

OS$X05024

ABEND IN modtype modname AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for the specified module.

modtype: The type of module that ABENDed

modtype: The name of module that had the ABENDed

xxxxxxxx: The location within the module where the ABEND occurred.

Source: OS$J2X05

Operator Response: Contact System Programmer.

OS$2P4024

ABEND IN modtype modname AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for the specified module.

modtype: The type of module that ABENDed

modtype: The name of module that had the ABENDed

xxxxxxxx: The location within the module where the ABEND occurred.

Source: OS$J2P4x

Operator Response: Contact System Programmer.

OS$2P4024

ABEND IN modtype modname AT OFFSET xxxxxxxx

Explanation: An ABEND has been detected for the specified module.

modtype: The type of module that ABENDed

modtype: The name of module that had the ABENDed

xxxxxxxx: The location within the module where the ABEND occurred.

Source: OS$J2P4x

Operator Response: Contact System Programmer.

OS$ACN025

EXIT POINT program DISABLED

Explanation: During execution of user exit program the exit module has become disabled due to a previous error. Usually this message is the result of an ABEND and message OS$xxx023 is issued.

program: The user exit being disabled.

Source: OS$ALCCN

System Action: OS/EM function being executed continues, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. Other messages will accompany this including OS$xxx023, OS$xxx026, and OS$xxx029. The module will show in a NOT LOADED status if a QUERY is done after an ABEND.

Operator Response: Contact System Programmer.

OS$DCN025

EXIT POINT program DISABLED

Explanation: During execution of user exit program the exit module has become disabled due to a previous error. Usually this message is the result of an ABEND and message OS$xxx023 is issued.

program: The user exit being disabled.

Source: OS$DADCN

System Action: OS/EM function being executed continues, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. Other messages will accompany this including OS$xxx023, OS$xxx026, and OS$xxx029. The module will show in a NOT LOADED status if a QUERY is done after an ABEND.

Operator Response: Contact System Programmer.

OS$FRA025

EXIT POINT program DISABLED

Explanation: During execution of user exit program the exit module has become disabled due to a previous error. Usually this message is the result of an ABEND and message OS$xxx023 is issued.

program: The user exit being disabled.

Source: OS$FRACN

System Action: OS/EM function being executed continues, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. Other messages will accompany this including OS$xxx023, OS$xxx026, and OS$xxx029. The module will show in a NOT LOADED status if a QUERY is done after an ABEND.

Operator Response: Contact System Programmer.

OS$HCN025

EXIT POINT program DISABLED

Explanation: During execution of user exit program the exit module has become disabled due to a previous error. Usually this message is the result of an ABEND and message OS$xxx023 is issued.

program: The user exit being disabled.

Source: OS$HSMCN

System Action: OS/EM function being executed continues, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. Other messages will accompany this including OS$xxx023, OS$xxx026, and OS$xxx029. The module will show in a NOT LOADED status if a QUERY is done after an ABEND.

Operator Response: Contact System Programmer.

OS$ICN025

EXIT POINT program DISABLED

Explanation: During execution of user exit program the exit module has become disabled due to a previous error. Usually this message is the result of an ABEND and message OS$xxx023 is issued.

program: The user exit being disabled.

Source: OS$ISPCN

System Action: OS/EM function being executed continues, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. Other messages will accompany this including OS$xxx023, OS$xxx026, and OS$xxx029. The module will show in a NOT LOADED status if a QUERY is done after an ABEND.

Operator Response: Contact System Programmer.

OS$J3E025

EXIT POINT program DISABLED

Explanation: During execution of user exit program the exit module has become disabled due to a previous error. Usually this message is the result of an ABEND and message OS$xxx023 is issued.

program: The user exit being disabled.

Source: OS$J3ECN

System Action: OS/EM function being executed continues, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. Other messages will accompany this including OS$xxx023, OS$xxx026, and OS$xxx029. The module will show in a NOT LOADED status if a QUERY is done after an ABEND.

Operator Response: Contact System Programmer.

OS$RCN025

EXIT POINT program DISABLED

Explanation: During execution of user exit program the exit module has become disabled due to a previous error. Usually this message is the result of an ABEND and message OS$xxx023 is issued.

program: The user exit being disabled.

Source: OS$RACCN

System Action: OS/EM function being executed continues, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. Other messages will accompany this including OS$xxx023, OS$xxx026, and OS$xxx029. The module will show in a NOT LOADED status if a QUERY is done after an ABEND.

Operator Response: Contact System Programmer.

OS$SCN025

EXIT POINT program DISABLED

Explanation: During execution of user exit program the exit module has become disabled due to a previous error. Usually this message is the result of an ABEND and message OS$xxx023 is issued.

program: The user exit being disabled.

Source: OS$SAFCN,OS$SMFCN

System Action: OS/EM function being executed continues, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. Other messages will accompany this including OS$xxx023, OS$xxx026, and OS$xxx029. The module will show in a NOT LOADED status if a QUERY is done after an ABEND.

Operator Response: Contact System Programmer.

OS$TCN025

EXIT POINT program DISABLED

Explanation: During execution of user exit program the exit module has become disabled due to a previous error. Usually this message is the result of an ABEND and message OS$xxx023 is issued.

program: The user exit being disabled.

Source: OS$TSOCN

System Action: OS/EM function being executed continues, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. Other messages will accompany this including OS$xxx023, OS$xxx026, and OS$xxx029. The module will show in a NOT LOADED status if a QUERY is done after an ABEND.

Operator Response: Contact System Programmer.

OS$ACN026

EXIT program DEACTIVATED

Explanation: During execution of user exit program the exit module has been deactivated due to a previous error. Usually this message is the result of an ABEND and message OS$xxx023 is issued.

program: Exit module name.

Source: OS$ALCCN

System Action: OS/EM function being executed continues, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. Other messages will accompany this including OS$xxx024, OS$xxx025, and OS$xxx029. The module will show in a NOT LOADED status if a QUERY is done after an ABEND.

Operator Response: Contact System Programmer.

OS$DCN026

EXIT program DEACTIVATED

Explanation: During execution of user exit program the exit module has been deactivated due to a previous error. Usually this message is the result of an ABEND and message OS$xxx023 is issued.

program: Exit module name.

Source: OS$DADCN

System Action: OS/EM function being executed continues, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. Other messages will accompany this including OS$xxx024, OS$xxx025, and OS$xxx029. The module will show in a NOT LOADED status if a QUERY is done after an ABEND.

Operator Response: Contact System Programmer.

OS$FCN026

EXIT program DEACTIVATED

Explanation: During execution of user exit program the exit module has been deactivated due to a previous error. Usually this message is the result of an ABEND and message OS$xxx023 is issued.

program: Exit module name.

Source: OS$FRACN

System Action: OS/EM function being executed continues, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. Other messages will accompany this including OS$xxx024, OS$xxx025, and OS$xxx029. The module will show in a NOT LOADED status if a QUERY is done after an ABEND.

Operator Response: Contact System Programmer.

OS$HCN026

EXIT program DEACTIVATED

Explanation: During execution of user exit program the exit module has been deactivated due to a previous error. Usually this message is the result of an ABEND and message OS$xxx023 is issued.

program: Exit module name.

Source: OS$HSMCN

System Action: OS/EM function being executed continues, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. Other messages will accompany this including OS$xxx024, OS$xxx025, and OS$xxx029. The module will show in a NOT LOADED status if a QUERY is done after an ABEND.

Operator Response: Contact System Programmer.

OS$ICN026

EXIT program DEACTIVATED

Explanation: During execution of user exit program the exit module has been deactivated due to a previous error. Usually this message is the result of an ABEND and message OS$xxx023 is issued.

program: Exit module name.

Source: OS$ISPCN

System Action: OS/EM function being executed continues, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. Other messages will accompany this including OS$xxx024, OS$xxx025, and OS$xxx029. The module will show in a NOT LOADED status if a QUERY is done after an ABEND.

Operator Response: Contact System Programmer.

OS$J3E026

EXIT program DEACTIVATED

Explanation: During execution of user exit program the exit module has been deactivated due to a previous error. Usually this message is the result of an ABEND and message OS$xxx023 is issued.

program: Exit module name.

Source: OS$J3ECN

System Action: OS/EM function being executed continues, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. Other messages will accompany this including OS$xxx024, OS$xxx025, and OS$xxx029. The module will show in a NOT LOADED status if a QUERY is done after an ABEND.

Operator Response: Contact System Programmer.

OS$RCN026

EXIT program DEACTIVATED

Explanation: During execution of user exit program the exit module has been deactivated due to a previous error. Usually this message is the result of an ABEND and message OS$xxx023 is issued.

program: Exit module name.

Source: OS$RACCN

System Action: OS/EM function being executed continues, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. Other messages will accompany this including OS$xxx024, OS$xxx025, and OS$xxx029. The module will show in a NOT LOADED status if a QUERY is done after an ABEND.

Operator Response: Contact System Programmer.

OS$SCN026

EXIT program DEACTIVATED

Explanation: During execution of user exit program the exit module has been deactivated due to a previous error. Usually this message is the result of an ABEND and message OS$xxx023 is issued.

program: Exit module name.

Source: OS$SAFCN,OS$SMFCN

System Action: OS/EM function being executed continues, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. Other messages will accompany this including OS$xxx024, OS$xxx025, and OS$xxx029. The module will show in a NOT LOADED status if a QUERY is done after an ABEND.

Operator Response: Contact System Programmer.

OS$TCN026

EXIT program DEACTIVATED

Explanation: During execution of user exit program the exit module has been deactivated due to a previous error. Usually this message is the result of an ABEND and message OS$xxx023 is issued.

program: Exit module name.

Source: OS$TSOCN

System Action: OS/EM function being executed continues, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. Other messages will accompany this including OS$xxx024, OS$xxx025, and OS$xxx029. The module will show in a NOT LOADED status if a QUERY is done after an ABEND.

Operator Response: Contact System Programmer.

OS$CMD027

ABEND IN OS/EM function MODULE module

Explanation: An ABEND occurred in an OS/EM function.

function: The functional area affected by the failing module

module: The name of the failing module

Source: OS$CMD

System Action: OS/EM function being executed continues, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. Other messages will accompany this including OS$xxx024, OS$xxx025, and OS$xxx029. The module will show in a NOT LOADED status if a QUERY is done after an ABEND.

Operator Response: Contact System Programmer.

OS$DC1027

ABEND IN OS/EM function MODULE module

Explanation: An ABEND occurred in an OS/EM function.

function: The functional area affected by the failing module

module: The name of the failing module

Source: OS$DCB1

System Action: OS/EM function being executed continues, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. Other messages will accompany this including OS$xxx024, OS$xxx025, and OS$xxx029. The module will show in a NOT LOADED status if a QUERY is done after an ABEND.

Operator Response: Contact System Programmer.

OS$IPL027

ABEND IN OS/EM function MODULE module

Explanation: An ABEND occurred in an OS/EM function.

function: The functional area affected by the failing module

module: The name of the failing module

Source: OS$IPL

System Action: OS/EM function being executed continues, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. Other messages will accompany this including OS$xxx024, OS$xxx025, and OS$xxx029. The module will show in a NOT LOADED status if a QUERY is done after an ABEND.

Operator Response: Contact System Programmer.

OS$TPS027

ABEND IN OS/EM function MODULE module

Explanation: An ABEND occurred in an OS/EM function.

function: The functional area affected by the failing module

module: The name of the failing module

Source: OS$TPSHR

System Action: OS/EM function being executed continues, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. Other messages will accompany this including OS$xxx024, OS$xxx025, and OS$xxx029. The module will show in a NOT LOADED status if a QUERY is done after an ABEND.

Operator Response: Contact System Programmer.

OS$02F027

ABEND IN OS/EM function MODULE module

Explanation: An ABEND occurred in an OS/EM function.

function: The functional area affected by the failing module

module: The name of the failing module

Source: OS$0002F

System Action: OS/EM function being executed continues, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. Other messages will accompany this including OS$xxx024, OS$xxx025, and OS$xxx029. The module will show in a NOT LOADED status if a QUERY is done after an ABEND.

Operator Response: Contact System Programmer.

OS$LOK029

MODULE program STORAGE RELEASED (xxxxxxxx)

Explanation: The specified module has been deleted from CSA/ECSA due to a previous error. Usually this message is the result of an ABEND and message OS$xxx024 is issued.

program: The name of the deleted module

xxxxxxxx: The address where the module previously resided

Source: OS$OS$LOCK

System Action: OS/EM function being executed continues, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. Other messages will accompany this including OS$xxx024, OS$xxx025, and OS$xxx026. The module will show in a NOT LOADED status if a QUERY is done after an ABEND.

Operator Response: Contact System Programmer.

OS$ACN030

function MODULE program NOT LOADED

Explanation: The OS/EM command processor OS$CNTL has requested a module to be loaded and it has failed during the load process. Another message usually accompanies this detailing the reason for failure.

OS$ABN032

OS/EM INTENTIONAL ABEND S0C3

Explanation: OS/EM has forced an abend S0C3.

*WARNING* JOB WOULD BE CANCELLED

USER NOT AUTHORIZED FOR SUBCOMMAND

Source: OS$RELOD

System Action: The OS$CNTL command being processed is ignored.

Operator Response: None.

System Programmer Response: If the User requesting the OS$CNTL subcommand requires access, provide access through the Security interface as documented in the OS/EM User Guide.

OS$ATH047

*WARNING* RESOURCE 'xxxx' NOT PROTECTED

Explanation: The OS/EM command processor for OS/EM options processing, has determined that security checking for OS$CNTL functions has not been defined to the security manager in use.

xxxx: The OS/EM resource that is not defined to the security manager.

Source: OS$AUTH

System Action: The OS$CNTL command being processed continues.

Operator Response: None.

System Programmer Response: Implement the Security interface as provided in the OS/EM User Guide to insure non-authorized personnel do not have access to the OS$CNTL commands.

OS$ALC048

UNEXPECTED PARSE FAILURE

type CODE ACCEPTED

Explanation: The OS/EM command processor has accepted and processed the type code that was specified.

type: AUTHORIZATION , OPTION

Source: OS$CODE

System Action: The type code is processed and enables the OS$CNTL command to process OS/EM optional functions. Also see message OS$COD052.

Operator Response: None.

System Programmer Response: None.

OS$COD050

OS/EM WILL EXPIRE yyyy.ddd

Explanation: The OS/EM command processor OS$CNTL will expire in year yyyy and julian day ddd.

yyyy.ddd: Year and julian day OS/EM will expire.

Source: OS$CODE

System Action: All OS/EM optional functions and features will be available until yyyy.dddd. Also see message OS$COD049.

Operator Response: None.

System Programmer Response: None.

OS$COD051

type CODE NOT VALID FOR THIS CPU

Explanation: The OS/EM command processor has determined that the type code specified is not valid for this CPU.

type: AUTHORIZATION , OPTION.

Source: OS$CODE

System Action: The type code is not processed and OS$CNTL command is disabled for processing OS/EM optional functions.

Operator Response: Notify the System Programmer.

System Programmer Response: Verify that the type code supplied by OS/EM support was the one entered. Contact OS/EM support for assistance in problem resolution.

OS$DAP052

TYPE dsngroup ALREADY SPECIFIED FOR (DIS)ALLOW - NOT ADDED TO (DIS)ALLOW LIST

Explanation: During processing of OS$CNTL Quick Pool DASD pooling definitions, the same dataset name group was specified as both an allow list and a disallow list.

dsngroup: The name of the dataset name group.

Source: OS$POOL

System Action: The OS$CNTL Quick Pool DASD pooling definition is not added to the (DIS)Allow list.

Operator Response: None.

System Programmer Response: Remove the dataset name group from either the allow list or the disallow list and re-issue the command.

OS$HSP053

jjjj WAITING FOR OS/EM INITIALIZATION TO COMPLETE

Explanation: OS/EM Sub-system Initialization is in progress. The batch TMP which loads all the OS/EM options has started and prevents job jjjj from starting until the batch TMP has completed.

jjjj: The Sub-system waiting for OS/EM initialization to complete.

Source: OS$HJ20

System Action: The Job jjjj waits until the batch TMP has completed loading all OS/EM options. Message OS$xxx054 is also issued to allow the Job jjjj to start before OS/EM options are loaded but the functional capabilities of Job jjjj could be unpredictable until the batch TMP has loaded the OS/EM options. If the batch TMP Abends reply Y to continue initialization.

Operator Response: None.

System Programmer Response: None.

OS$IAT053

jjjj WAITING FOR OS/EM INITIALIZATION TO COMPLETE

Explanation: OS/EM Sub-system Initialization is in progress. The batch TMP which loads all the OS/EM options has started and prevents job jjjj from starting until the batch TMP has completed.

jjjj: The Sub-system waiting for OS/EM initialization to complete.

Source: OS$INTK

Operator Response: None.

System Programmer Response: None.

OS$HSP054

REPLY Y TO BYPASS WAIT

TMP IKJEFT01 ABENDED aaaa

Explanation: The batch TMP that loads the MVS OS/EM options program has abended with a System Abend aaaa.

aaaa: MVS System Abend code.

Source: OS$INIT

System Action: The batch TMP stops processing.

Operator Response: Contact the System Programmer.

System Programmer Response: Use IPCS to process the SVC dump from the SYSMDUMP DDNAME in the batch TMP, take the corrective action required, perform an LLA,REFRESH, and start the batch TMP. Contact OS/EM support for assistance in problem resolution.

OS$INT065

program ATTACH FAILED. RC = rc

Explanation: The OS/EM module that attaches the TSO batch TMP has failed.

program: IKJEFT01

rc: ATTACH return code.

Source: OS$INIT

System Action: The batch TMP stops processing.

Operator Response: Contact the System Programmer.

System Programmer Response: Refer to ATTACH macro to determine meaning of the return code, take the corrective action required, perform an LLA,REFRESH, and start the batch TMP. Contact OS/EM support for assistance in problem resolution.

OS$ALC066

dataset DYNAMIC (UN)ALLOCATION FAILED. RC = rc

Explanation: An OS/EM module has attempted to dynamically allocate or unallocate a dataset and has failed.

dataset: The DDNAME or Dataset Name that was being allocated or unallocated.

DDNAME for Batch TMP

Password Dataset

Communication Dataset for TAPESHR

rc: Dynamic Allocation (SVC99) return code.

Source:: OS$ALLO1

System Action: The OS$ALLO1 function being executed fails.

Operator Response: Contact the System Programmer.

System Programmer Response: Refer to SVC99 macro to determine the meaning of the return code, take the corrective action required, re-issue the command or restart the batch TMP. Contact OS/EM support for assistance in problem resolution.

OS$B14066

dataset DYNAMIC (UN)ALLOCATION FAILED. RC = rc

Explanation: An OS/EM module has attempted to dynamically allocate or unallocate a dataset and has failed.

dataset: The DDNAME or Dataset Name that was being allocated or unallocated.

DDNAME for Batch TMP

Password Dataset

Communication Dataset for TAPESHR

rc: Dynamic Allocation (SVC99) return code.

Source:: OS$BR14

System Action: The OS$BR14 function being executed fails.

Operator Response: Contact the System Programmer.

OS$INT066

dataset DYNAMIC (UN)ALLOCATION FAILED. RC = rc

Explanation: An OS/EM module has attempted to dynamically allocate or unallocate a dataset and has failed.

dataset: The DDNAME or Dataset Name that was being allocated or unallocated.

DDNAME for Batch TMP

Password Dataset

Communication Dataset for TAPESHR

rc: Dynamic Allocation (SVC99) return code.

Source:: OS$INIT

System Action: The OS$INIT function being executed fails.

Operator Response: Contact the System Programmer.

OS$IPL066

dataset DYNAMIC (UN)ALLOCATION FAILED. RC = rc

Explanation: An OS/EM module has attempted to dynamically allocate or unallocate a dataset and has failed.

dataset: The DDNAME or Dataset Name that was being allocated or unallocated.

DDNAME for Batch TMP

Password Dataset

Communication Dataset for TAPESHR

rc: Dynamic Allocation (SVC99) return code.

Source:: OS$IPL

System Action: The OS$IPL function being executed fails.

Operator Response: Contact the System Programmer.

OS$JS2066

dataset DYNAMIC (UN)ALLOCATION FAILED. RC = rc

Explanation: An OS/EM module has attempted to dynamically allocate or unallocate a dataset and has failed.

dataset: The DDNAME or Dataset Name that was being allocated or unallocated.

DDNAME for Batch TMP

Password Dataset

Communication Dataset for TAPESHR

rc: Dynamic Allocation (SVC99) return code.

Source:: OS$JES2B,OS$JES2G

System Action: The OS$JES2B,OS$JES2G function being executed fails.

Operator Response: Contact the System Programmer.

OS$LOD066

dataset DYNAMIC (UN)ALLOCATION FAILED. RC = rc

Explanation: An OS/EM module has attempted to dynamically allocate or unallocate a dataset and has failed.

dataset: The DDNAME or Dataset Name that was being allocated or unallocated.

DDNAME for Batch TMP

Password Dataset

Communication Dataset for TAPESHR

rc: Dynamic Allocation (SVC99) return code.

Source:: OS$LOAD

System Action: The OS$LOAD function being executed fails.

Operator Response: Contact the System Programmer.

OS$TPS066

dataset DYNAMIC (UN)ALLOCATION FAILED. RC = rc

Explanation: An OS/EM module has attempted to dynamically allocate or unallocate a dataset and has failed.

dataset: The DDNAME or Dataset Name that was being allocated or unallocated.

DDNAME for Batch TMP

Password Dataset

Communication Dataset for TAPESHR

rc: Dynamic Allocation (SVC99) return code.

Source:: OS$TPSHR

System Action: The OS$TPSHR function being executed fails.

Operator Response: Contact the System Programmer.

OS$W21066

dataset DYNAMIC (UN)ALLOCATION FAILED. RC = rc

Explanation: An OS/EM module has attempted to dynamically allocate or unallocate a dataset and has failed.

dataset: The DDNAME or Dataset Name that was being allocated or unallocated.

DDNAME for Batch TMP

Password Dataset

Communication Dataset for TAPESHR

rc: Dynamic Allocation (SVC99) return code.

Source:: OS$W21SD

System Action: The OS$W21SD function being executed fails.

Operator Response: Contact the System Programmer.

OS$2M0066

dataset DYNAMIC (UN)ALLOCATION FAILED. RC = rc

Explanation: An OS/EM module has attempted to dynamically allocate or unallocate a dataset and has failed.

dataset: The DDNAME or Dataset Name that was being allocated or unallocated.

DDNAME for Batch TMP

Password Dataset

Communication Dataset for TAPESHR

rc: Dynamic Allocation (SVC99) return code.

Source:: OS$J2M0x

System Action: The OS$J2M0x function being executed fails.

Operator Response: Contact the System Programmer.

OS$2M1066

dataset DYNAMIC (UN)ALLOCATION FAILED. RC = rc

Explanation: An OS/EM module has attempted to dynamically allocate or unallocate a dataset and has failed.

dataset: The DDNAME or Dataset Name that was being allocated or unallocated.

DDNAME for Batch TMP

Password Dataset

Communication Dataset for TAPESHR

rc: Dynamic Allocation (SVC99) return code.

Source:: OS$J2M1x

System Action: The OS$J2M1x function being executed fails.

Operator Response: Contact the System Programmer.

OS$VCN067

OS/EM SVC MODULE program DEACTIVATED

Explanation: The OS/EM SVC module program has been disabled / deactivated.

program: OS/EM SVC intercept module:

OS$0002F - SVC 26 Not Cataloged 2 intercept

OS$0004B - SVC 42 Attach SVC for JES2 or JES3 initialization

Source: OS$SVCCN

System Action: The SVC module is deactivated and the OS/EM function is disabled. Additional messages OS$xxx068 and OS$VCN069 are issued and a SVC dump is taken. If the function is SVC 26 then all optional OS/EM functions related to NOT CATALOGED 2 processing will be inoperative. If the function is SVC 42 then JES2 or JES3 initialization will proceed without OS/EM options being initialized; this could provide some additional problems during JES2 or JES3 initialization.

Operator Response: None.

System Programmer Response: Use IPCS to determine the reason for the abend. Take the corrective action indicated. Reload the SVC intercept using OS/EM reload facilities. Contact OS/EM support for assistance in problem resolution.

OS$VCN069

OS/EM SVC nnn INTERCEPT INACTIVATED

Explanation: The OS/EM SVC nnn intercept has been inactivated / disabled.

nnn: SVC intercept number:

SVC 26 Not Cataloged 2 intercept

SVC 42 Attach SVC for JES2 or JES3 initialization

Source: OS$SVCCN

System Action: The SVC module is intercept is inactivated. Additional messages OS$VCN067 and OS$xxx068 are issued and a SVC dump is taken. If the function is SVC 26 then all optional OS/EM functions related to NOT CATALOGED 2 processing will be inoperative. If the function is SVC 42 then JES2 or JES3 initialization will proceed without OS/EM options being initialized, this could provide some additional problems during JES2 or JES3 initialization.

Operator Response: None.

OS$ACN070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$ALCCN

System Action: The OS/EM function being executed continues. OS/EM takes an SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. See messages OS$xxx023, OS$xxx026 and OS$xxx029.

Operator Response: Contact the System Programmer.

System Programmer Response: Use IPCS to determine the cause of the ABEND, take the corrective action required, perform a LLA,REFRESH and reload the failing module using the OS/EM ISPF RELOAD facility. If necessary, contact OS/EM Technical Support for assistance with problem resolution.

OS$ALC070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$ALLO0,OS$ALLO1

Operator Response: Contact the System Programmer.

OS$ASY070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$ASYNC

Operator Response: Contact the System Programmer.

OS$CMD070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$CMD

Operator Response: Contact the System Programmer.

OS$COM070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$COMM

Operator Response: Contact the System Programmer.

OS$DCN070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$DADCN

Operator Response: Contact the System Programmer.

OS$DC1070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$DCB1

Operator Response: Contact the System Programmer.

OS$EXR070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$EXRTN

Operator Response: Contact the System Programmer.

OS$FRA070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$FRACN

Operator Response: Contact the System Programmer.

OS$FTN070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$FRRTN

Operator Response: Contact the System Programmer.

OS$HCN070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$HSMCN

Operator Response: Contact the System Programmer.

OS$HSP070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$HJ20x

Operator Response: Contact the System Programmer.

OS$IAT070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$INTK

Operator Response: Contact the System Programmer.

OS$ICN070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$ISPCN

Operator Response: Contact the System Programmer.

OS$IPL070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$IPL

Operator Response: Contact the System Programmer.

OS$JS2070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$JES2B,OS$JES2G

Operator Response: Contact the System Programmer.

OS$J2M070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$J2MCx

Operator Response: Contact the System Programmer.

OS$J2R070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$J2ERx

Operator Response: Contact the System Programmer.

OS$J2S070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$J2SCx

Operator Response: Contact the System Programmer.

OS$J3E070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$J3ECN

Operator Response: Contact the System Programmer.

OS$J3S070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$J3SVC

Operator Response: Contact the System Programmer.

OS$LOK070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$LOCK

Operator Response: Contact the System Programmer.

OS$RCN070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$RACCN

Operator Response: Contact the System Programmer.

OS$SCN070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$SAFCN,OS$SMFCN

Operator Response: Contact the System Programmer.

OS$TCN070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$TSOCN

Operator Response: Contact the System Programmer.

OS$TPS070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$TPSHR

Operator Response: Contact the System Programmer.

OS$UJI070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$UJI

Operator Response: Contact the System Programmer.

OS$USI070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$USI

Operator Response: Contact the System Programmer.

OS$VCN070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$SVCCN

Operator Response: Contact the System Programmer.

OS$X05070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$J2X05

Operator Response: Contact the System Programmer.

OS$02F070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$0002F

Operator Response: Contact the System Programmer.

OS$1PL070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$IPL1

Operator Response: Contact the System Programmer.

OS$2H5070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$J2H5x

Operator Response: Contact the System Programmer.

OS$2P4070

ABEND Ssss/Uuuu, PSW AT ABEND: pppp pppp

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

Ssss: The MVS system code.

Usss: The MVS user reason code.

pppp pppp: The PSW.

Source: OS$J2P4x

Operator Response: Contact the System Programmer.

OS$ACN071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$ALCCN

Operator Response: Contact the System Programmer.

OS$ALC071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$ALLOC

Operator Response: Contact the System Programmer.

OS$ASY071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$ASYNC

Operator Response: Contact the System Programmer.

OS$CMD071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$CMD

Operator Response: Contact the System Programmer.

OS$COM071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$COMM

Operator Response: Contact the System Programmer.

OS$DCN071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$DADCN

Operator Response: Contact the System Programmer.

OS$DC1071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$DCB1

Operator Response: Contact the System Programmer.

OS$EXR071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$EXRTN

Operator Response: Contact the System Programmer.

OS$FRA071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$FRACN

Operator Response: Contact the System Programmer.

OS$FTN071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$FRRTN

Operator Response: Contact the System Programmer.

OS$HCN071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$HSMCN

Operator Response: Contact the System Programmer.

OS$HSP071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$HJ20x

Operator Response: Contact the System Programmer.

OS$IAT071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$INTK

Operator Response: Contact the System Programmer.

OS$ICN071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$ISPCN

Operator Response: Contact the System Programmer.

OS$IPL071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$IPL

Operator Response: Contact the System Programmer.

OS$JS2071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$JES2B,OS$JES2G

Operator Response: Contact the System Programmer.

OS$J2M071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$J2MCx

Operator Response: Contact the System Programmer.

OS$J2R071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$J2ERx

Operator Response: Contact the System Programmer.

OS$J2S071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$J2SCx

Operator Response: Contact the System Programmer.

OS$J3E071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$J3ECN

Operator Response: Contact the System Programmer.

OS$J3S071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$J3SVC

Operator Response: Contact the System Programmer.

OS$LOK071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$LOCK

Operator Response: Contact the System Programmer.

OS$RCN071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$RACCN

Operator Response: Contact the System Programmer.

OS$SCN071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$SAFCN,OS$SMFCN

Operator Response: Contact the System Programmer.

OS$TCN071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$TSOCN

Operator Response: Contact the System Programmer.

OS$TPS071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$TPSHR

Operator Response: Contact the System Programmer.

OS$UJI071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$UJI

Operator Response: Contact the System Programmer.

OS$USI071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$USI

Operator Response: Contact the System Programmer.

OS$VCN071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$SVCCN

Operator Response: Contact the System Programmer.

OS$X05071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$J2X05

Operator Response: Contact the System Programmer.

OS$02F071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$0002F

Operator Response: Contact the System Programmer.

OS$1PL071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$IPL1

Operator Response: Contact the System Programmer.

OS$2H5071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$J2H5x

Operator Response: Contact the System Programmer.

OS$2P4071

DATA AT PSW AREA (aaaaaaaa): dddddddd

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit.

aaaaaaaa: The address pointed to by the PSW (if accessible).

dddddddd: The contents of storage.

Source: OS$J2P4x

Operator Response: Contact the System Programmer.

OS$ACN072

DATA AT PSW AREA IS INACCESSIBLE

Explanation: OS/EM has detected an MVS System ABEND during execution of an OS/EM optional function or a user exit. However, the storage pointed to by the PSW cannot be displayed because it cannot be accessed.

Source: OS$ALCCN

Operator Response: Contact the System Programmer.

OS$ALC072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$ALLOC

Operator Response: Contact the System Programmer.

OS$ASY072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$ASYNC

Operator Response: Contact the System Programmer.

OS$CMD072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$CMD

Operator Response: Contact the System Programmer.

OS$COM072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$COMM

Operator Response: Contact the System Programmer.

OS$DCN072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$DADCN

Operator Response: Contact the System Programmer.

OS$DC1072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$DCB1

Operator Response: Contact the System Programmer.

OS$EXR072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$EXRTN

Operator Response: Contact the System Programmer.

OS$FTN072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$FRRTN

Operator Response: Contact the System Programmer.

OS$HCN072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$HSMCN

Operator Response: Contact the System Programmer.

OS$HSP072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$HJ20x

Operator Response: Contact the System Programmer.

OS$IAT072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$INTK

Operator Response: Contact the System Programmer.

OS$ICN072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$ISPCN

Operator Response: Contact the System Programmer.

OS$IPL072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$IPL

Operator Response: Contact the System Programmer.

OS$JS2072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$JES2B,OS$JES2G

Operator Response: Contact the System Programmer.

OS$J2M072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$J2MCx

Operator Response: Contact the System Programmer.

OS$J2R072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$J2ERx

Operator Response: Contact the System Programmer.

OS$J2S072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$J2SCx

Operator Response: Contact the System Programmer.

OS$J3E072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$J3ECN

Operator Response: Contact the System Programmer.

OS$J3S072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$J3SVC

Operator Response: Contact the System Programmer.

OS$LOK072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$LOCK

Operator Response: Contact the System Programmer.

OS$RCN072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$RACCN

Operator Response: Contact the System Programmer.

OS$SCN072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$SAFCN,OS$SMFCN

Operator Response: Contact the System Programmer.

OS$TCN072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$TSOCN

Operator Response: Contact the System Programmer.

OS$TPS072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$TPSHR

Operator Response: Contact the System Programmer.

OS$UJI072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$UJI

Operator Response: Contact the System Programmer.

OS$USI072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$USI

Operator Response: Contact the System Programmer.

OS$VCN072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$SVCCN

Operator Response: Contact the System Programmer.

OS$X05072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$J2X05

Operator Response: Contact the System Programmer.

OS$02F072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$0002F

Operator Response: Contact the System Programmer.

OS$1PL072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$IPL1

Operator Response: Contact the System Programmer.

OS$2H5072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$J2H5x

Operator Response: Contact the System Programmer.

OS$2P4072

DATA AT PSW AREA IS INACCESSIBLE

Source: OS$J2P4x

Operator Response: Contact the System Programmer.

OS$ACN073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$ALCCN

System Action: The OS/EM function being executed continues, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. See messages OS$xxx023, OS$xxx026 and OS$xxx029.

Operator Response: Contact System Programmer.

System Programmer Response: Use IPCS to determine the cause for the ABEND, take the corrective action required, perform an LLA,REFRESH, and reload the failing module using the OS/EM ISPF RELOAD facility. Contact OS/EM support for assistance in problem resolution.

OS$ALC073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$ALLO0,OS$ALLO1

Operator Response: Contact System Programmer.

OS$ASY073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$ASYNC

Operator Response: Contact System Programmer.

OS$CMD073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$CMD

Operator Response: Contact System Programmer.

OS$COM073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$COMM

Operator Response: Contact System Programmer.

OS$DCN073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$DADCN

Operator Response: Contact System Programmer.

OS$DC1073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$DCB1

Operator Response: Contact System Programmer.

OS$EXR073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$EXRTN

Operator Response: Contact System Programmer.

OS$FRA073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$FRACN

Operator Response: Contact System Programmer.

OS$FTN073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$FRRTN

Operator Response: Contact System Programmer.

OS$HCN073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$HSMCN

Operator Response: Contact System Programmer.

OS$HSP073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$HJ20x

Operator Response: Contact System Programmer.

OS$IAT073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$INTK

Operator Response: Contact System Programmer.

OS$ICN073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$ISPCN

Operator Response: Contact System Programmer.

OS$IPL073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$IPL

Operator Response: Contact System Programmer.

OS$JS2073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$JES2B,OS$JES2G

Operator Response: Contact System Programmer.

OS$J2M073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2MCx

Operator Response: Contact System Programmer.

OS$J2R073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2ERx

Operator Response: Contact System Programmer.

OS$J2S073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2SCx

Operator Response: Contact System Programmer.

OS$J3E073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J3ECN

Operator Response: Contact System Programmer.

OS$J3S073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J3SVC

Operator Response: Contact System Programmer.

OS$LOK073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$LOCK

Operator Response: Contact System Programmer.

OS$RCN073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$RACCN

Operator Response: Contact System Programmer.

OS$SCN073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$SAFCN,OS$SMFCN

Operator Response: Contact System Programmer.

OS$TCN073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$TSOCN

Operator Response: Contact System Programmer.

OS$TPS073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$TPSHR

Operator Response: Contact System Programmer.

OS$UJI073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$UJI

Operator Response: Contact System Programmer.

OS$USI073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$USI

Operator Response: Contact System Programmer.

OS$VCN073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$SVCCN

Operator Response: Contact System Programmer.

OS$X05073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2X05

Operator Response: Contact System Programmer.

OS$02F073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$0002F

Operator Response: Contact System Programmer.

OS$1PL073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$IPL1

Operator Response: Contact System Programmer.

OS$2H5073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2H5x

Operator Response: Contact System Programmer.

OS$2P4073

ABEND REGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2P4x

Operator Response: Contact System Programmer.

OS$ACN074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$ALCCN

Operator Response: Contact System Programmer.

OS$ALC074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$ALLO0,OS$ALLO1

Operator Response: Contact System Programmer.

OS$ASY074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$ASYNC

Operator Response: Contact System Programmer.

OS$CMD074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$CMD

Operator Response: Contact System Programmer.

OS$COM074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$COMM

Operator Response: Contact System Programmer.

OS$DCN074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$DADCN

Operator Response: Contact System Programmer.

OS$DC1074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$DCB1

Operator Response: Contact System Programmer.

OS$EXR074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$EXRTN

Operator Response: Contact System Programmer.

OS$FRA074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$FRACN

Operator Response: Contact System Programmer.

OS$FTN074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$FRRTN

Operator Response: Contact System Programmer.

OS$HCN074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$HSMCN

Operator Response: Contact System Programmer.

OS$HSP074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$HJ20x

Operator Response: Contact System Programmer.

OS$IAT074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$INTK

Operator Response: Contact System Programmer.

OS$ICN074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$ISPCN

Operator Response: Contact System Programmer.

OS$IPL074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$IPL

Operator Response: Contact System Programmer.

OS$JS2074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$JES2B,OS$JES2G

Operator Response: Contact System Programmer.

OS$J2M074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2MCx

Operator Response: Contact System Programmer.

OS$J2R074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2ERx

Operator Response: Contact System Programmer.

OS$J2S074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2SCx

Operator Response: Contact System Programmer.

OS$J3E074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J3ECN

Operator Response: Contact System Programmer.

OS$J3S074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J3SVC

Operator Response: Contact System Programmer.

OS$LOK074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$LOCK

Operator Response: Contact System Programmer.

OS$RCN074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$RACCN

Operator Response: Contact System Programmer.

OS$SCN074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$SAFCN,OS$SMFCN

Operator Response: Contact System Programmer.

OS$TCN074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$TSOCN

Operator Response: Contact System Programmer.

OS$TPS074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$TPSHR

Operator Response: Contact System Programmer.

OS$UJI074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$UJI

Operator Response: Contact System Programmer.

OS$USI074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$USI

Operator Response: Contact System Programmer.

OS$VCN074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$SVCCN

Operator Response: Contact System Programmer.

OS$X05074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2X05

Operator Response: Contact System Programmer.

OS$02F074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$0002F

Operator Response: Contact System Programmer.

OS$1PL074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$IPL1

Operator Response: Contact System Programmer.

OS$2H5074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2H5x

Operator Response: Contact System Programmer.

OS$2P4074

ABEND REGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2P4x

Operator Response: Contact System Programmer.

OS$ACN075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$ALCCN

Operator Response: Contact System Programmer.

OS$ALC075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$ALLO0,OS$ALLO1

Operator Response: Contact System Programmer.

OS$ASY075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$ASYNC

Operator Response: Contact System Programmer.

OS$CMD075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$CMD

Operator Response: Contact System Programmer.

OS$COM075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$COMM

Operator Response: Contact System Programmer.

OS$DCN075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$DADCN

Operator Response: Contact System Programmer.

OS$DC1075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$DCB1

Operator Response: Contact System Programmer.

OS$EXR075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$EXRTN

Operator Response: Contact System Programmer.

OS$FRA075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$FRACN

Operator Response: Contact System Programmer.

OS$FTN075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$FRRTN

Operator Response: Contact System Programmer.

OS$HCN075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$HSMCN

Operator Response: Contact System Programmer.

OS$HSP075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$HJ20x

Operator Response: Contact System Programmer.

OS$IAT075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$INTK

Operator Response: Contact System Programmer.

OS$ICN075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$ISPCN

Operator Response: Contact System Programmer.

OS$IPL075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$IPL

Operator Response: Contact System Programmer.

OS$JS2075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$JES2B,OS$JES2G

Operator Response: Contact System Programmer.

OS$J2M075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2MCx

Operator Response: Contact System Programmer.

OS$J2R075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2ERx

Operator Response: Contact System Programmer.

OS$J2S075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2SCx

Operator Response: Contact System Programmer.

OS$J3E075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J3ECN

Operator Response: Contact System Programmer.

OS$J3S075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J3SVC

Operator Response: Contact System Programmer.

OS$LOK075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$LOCK

Operator Response: Contact System Programmer.

OS$RCN075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$RACCN

Operator Response: Contact System Programmer.

OS$SCN075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$SAFCN,OS$SMFCN

Operator Response: Contact System Programmer.

OS$TCN075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$TSOCN

Operator Response: Contact System Programmer.

OS$TPS075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$TPSHR

Operator Response: Contact System Programmer.

OS$UJI075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$UJI

Operator Response: Contact System Programmer.

OS$USI075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$USI

Operator Response: Contact System Programmer.

OS$VCN075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$SVCCN

Operator Response: Contact System Programmer.

OS$X05075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2X05

Operator Response: Contact System Programmer.

OS$02F075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$0002F

Operator Response: Contact System Programmer.

OS$1PL075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$IPL1

Operator Response: Contact System Programmer.

OS$2H5075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2H5x

Operator Response: Contact System Programmer.

OS$2P4075

ABEND REGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2P4x

Operator Response: Contact System Programmer.

OS$ACN076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$ALCCN

Operator Response: Contact System Programmer.

OS$ALC076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$ALLO0,OS$ALLO1

Operator Response: Contact System Programmer.

OS$ASY076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$ASYNC

Operator Response: Contact System Programmer.

OS$CMD076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$CMD

Operator Response: Contact System Programmer.

OS$COM076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$COMM

Operator Response: Contact System Programmer.

OS$DCN076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$DADCN

Operator Response: Contact System Programmer.

OS$DC1076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$DCB1

Operator Response: Contact System Programmer.

OS$EXR076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$EXRTN

Operator Response: Contact System Programmer.

OS$FRA076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$FRACN

Operator Response: Contact System Programmer.

OS$FTN076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$FRRTN

Operator Response: Contact System Programmer.

OS$HCN076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$HSMCN

Operator Response: Contact System Programmer.

OS$HSP076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$HJ20x

Operator Response: Contact System Programmer.

OS$IAT076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$INTK

Operator Response: Contact System Programmer.

OS$ICN076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$ISPCN

Operator Response: Contact System Programmer.

OS$IPL076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$IPL

Operator Response: Contact System Programmer.

OS$JS2076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$JES2B,OS$JES2G

Operator Response: Contact System Programmer.

OS$J2M076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2MCx

Operator Response: Contact System Programmer.

OS$J2R076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2ERx

Operator Response: Contact System Programmer.

OS$J2S076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2SCx

Operator Response: Contact System Programmer.

OS$J3E076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J3ECN

Operator Response: Contact System Programmer.

OS$J3S076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J3SVC

Operator Response: Contact System Programmer.

OS$LOK076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$LOCK

Operator Response: Contact System Programmer.

OS$RCN076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$RACCN

Operator Response: Contact System Programmer.

OS$SCN076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$SAFCN,OS$SMFCN

Operator Response: Contact System Programmer.

OS$TCN076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$TSOCN

Operator Response: Contact System Programmer.

OS$TPS076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$TPSHR

Operator Response: Contact System Programmer.

OS$UJI076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$UJI

Operator Response: Contact System Programmer.

OS$USI076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$USI

Operator Response: Contact System Programmer.

OS$VCN076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$SVCCN

Operator Response: Contact System Programmer.

OS$X05076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2X05

Operator Response: Contact System Programmer.

OS$02F076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$0002F

Operator Response: Contact System Programmer.

OS$1PL076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$IPL1

Operator Response: Contact System Programmer.

OS$2H5076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2H5x

Operator Response: Contact System Programmer.

OS$2P4076

ABEND REGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2P4x

Operator Response: Contact System Programmer.

OS$LOD077

FILE ddname OPEN FAILED

Explanation: An OPEN failed for a user-supplied load library while attempting to load a module from that library. This message is preceded by message OS$LOD017 which will indicate which load module OS/EM was attempting to load.

ddname: The DDNAME of the library that could not be opened.

Source: OS$LOAD

System Action: OS/EM function being executed continues. The requested load module will not be executed.

Operator Response: Contact System Programmer.

System Programmer Response: Verify that the user library specification is correct and the library is available. RELOAD the failing module using the OS/EM ISPF RELOAD facility.

OS$DEL078

MODULE program DELETED (xxxxxxxx)

Explanation: User exit program has been deleted from CSA/ECSA. If this message is the result of an ABEND, messages OS$xxx024, OS$xxx029, OS$xxx025 and others may be issued.

program: Exit module name.

xxxxxxxx: The load address of the exit module.

Source: OS$DEL

System Action: OS/EM function being executed continues, OS/EM takes a SVC dump for the abending module, takes the abending module out of service, and deletes the abending module from CSA/ECSA. Other messages will accompany this including OS$xxx024, OS$xxx025, and OS$xxx026. The module will show in a NOT LOADED status if a QUERY is done.

Operator Response: If this message is the result of an ABEND, contact the System Programmer.

OS$LOD079

JES2 MODULE HAS INVALID FORMAT

Explanation: During execution of a OS$CNTL command for either loading or reloading a JES2 module the module was found to not meet requirements for a JES2 exit.

Source: OS$LOAD

System Action: The JES2 exit module is not loaded.

Operator Response: None.

System Programmer Response: The JES2 exit does not conform to the requirements for a JES2 exit. Probable errors, the JES2 MIT is either missing or invalid, or the linkedit name is not the same as the $MODULE name.

OS$LOD080

MODULE AT DIFFERENT LEVEL THAN jes2

Explanation: During either JES2 initialization or the execution of OS$CNTL to load / reload an exit module, the level of the JES2 macros used to assemble the JES2 Offset Table or the user exit are not the same level as the macros used to assemble the JES2 system.

jes2: The Jesname for this JES2 system.

Source: OS$LOAD

System Action: OS/EM initialization fails or the JES2 exit module is not loaded.

Operator Response: None.

System Programmer Response: If this occurs during start up of JES2, the JES2 Offset Table (OS$J2OFx) was not assembled using the correct SYS1.HASPSRC. To correct this, re-assemble the OS$J2OFx module using the correct SYS1.HASPSRC and RE-IPL the system. If this occurs with a JES2 user

Alternately, if this occurs with a JES2 user exit, re-assemble the JES2 user exit using the correct SYS1.HASPSRC, perform an LLA,REFRESH and reload the exit using OS/EM ISPF reload facility. Contact OS/EM support for assistance in problem resolution.

OS$LOD081

*WARNING* MODULE program ASSEMBLED WITH DIFFERENT MACRO LEVEL THAN jes2

Explanation: During either JES2 initialization or the execution of OS$CNTL to load / reload a JES2 exit module, the level of the MVS macros used to assemble the JES2 Offset Table or the user exit are not the same level as the macros used to assemble the JES2 modules.

program: Exit module name.

jes2: The Jesname for this JES2 system.

Source: OS$LOAD

System Action: The JES2 exit module is loaded.

Operator Response: None.

System Programmer Response: If this occurs during start- up of JES2, the JES2 Offset Table (OS$J2OFx) was not assembled using the correct SYS1.MACLIB. To correct this, re-assemble the OS$J2OFx module using the correct SYS1.MACLIB.

Alternately, if this occurs with a JES2 user exit, re-assemble the user exit using the correct SYS1.MACLIB, perform a LLA REFRESH and reload the exit using the OS/EM ISPF reload facility. Contact OS/EM support for assistance in problem resolution.

OS$CAL082

ENTRY entryname NOT FOUND IN LOAD MODULE program

Explanation: When using the OS$CNTL command for loading or reloading of an exit module, the $EXIT statement was not found in User module program specifying the exit entry point.

entryname: The JES2 exit entry point.

program: Exit module name.

Source: OS$ECALL

System Action: The JES2 exit module is not loaded.

Operator Response: None.

System Programmer Response: Verify that the exit name specified in the command is the same as that specified on the $EXIT macro in the JES2 User exit. Correct the User exit program, re-assemble the User exit program, perform a LLA REFRESH and use the OS/EM reload facility to reload the JES2 User exit. Contact OS/EM support for assistance in problem resolution.

OS$HSP082

ENTRY entryname NOT FOUND IN LOAD MODULE program

Explanation: When using the OS$CNTL command for loading or reloading of an exit module, the $EXIT statement was not found in User module program specifying the exit entry point.

entryname: The JES2 exit entry point.

program: Exit module name.

Source: OS$HJ20

System Action: The JES2 exit module is not loaded.

Operator Response: None.

OS$J2J082

ENTRY entryname NOT FOUND IN LOAD MODULE program

Explanation: When using the OS$CNTL command for loading or reloading of an exit module, the $EXIT statement was not found in User module program specifying the exit entry point.

entryname: The JES2 exit entry point.

program: Exit module name.

Source: OS$J2JCx

System Action: The JES2 exit module is not loaded.

Operator Response: None.

OS$LOD082

ENTRY entryname NOT FOUND IN LOAD MODULE program

Explanation: When using the OS$CNTL command for loading or reloading of an exit module, the $EXIT statement was not found in User module program specifying the exit entry point.

entryname: The JES2 exit entry point.

program: Exit module name.

Source: OS$LOAD

System Action: The JES2 exit module is not loaded.

Operator Response: None.

OS$REL082

ENTRY entryname NOT FOUND IN LOAD MODULE program

Explanation: When using the OS$CNTL command for loading or reloading of an exit module, the $EXIT statement was not found in User module program specifying the exit entry point.

entryname: The JES2 exit entry point.

program: Exit module name.

Source: OS$RELOD

System Action: The JES2 exit module is not loaded.

Operator Response: None.

OS$X00082

ENTRY entryname NOT FOUND IN LOAD MODULE program

Explanation: When using the OS$CNTL command for loading or reloading of an exit module, the $EXIT statement was not found in User module program specifying the exit entry point.

entryname: The JES2 exit entry point.

program: Exit module name.

Source: OS$J2X00

System Action: The JES2 exit module is not loaded.

Operator Response: None.

OS$2TP082

ENTRY entryname NOT FOUND IN LOAD MODULE program

Explanation: When using the OS$CNTL command for loading or reloading of an exit module, the $EXIT statement was not found in User module program specifying the exit entry point.

entryname: The JES2 exit entry point.

program: Exit module name.

Source: OS$J2TPx

System Action: The JES2 exit module is not loaded.

Operator Response: None.

OS$HSP083

OS/EM jjjj INITIALIZATION ERRORS. ENTER 'Y' TO CONTINUE STARTUP, 'N' TO TERMINATE jjjj

OS$J2M089

INVALID RETURN CODE rc FROM jes2 EXITnn (module:entry)

Explanation: The OS/EM controller manager for JES2 has detected that the exit point nn has been passed an invalid return code from the specified user exit.

rc: The return code passed back by the user exit.

jes2: The Jesname of the JES2 System.

nn: JES2 exit number.

module:entry: The load module and entry names of the user exit.

Source: OS$J2MCx

System Action: The module module:entry for exit point nn is disabled, because the nn exit requested optional valid return code checking or module module:entry returned an invalid return code for exit nn.

Operator Response: Contact System Programmer.

System Programmer Response: Review the JES2 exit module:entry to determine why the exit returned an invalid return code. Correct the JES2 exit module:entry, and reload the JES2 exit with OS/EM reload facilities. Contact OS/EM support for assistance in problem resolution.

OS$J2S089

INVALID RETURN CODE rc FROM jes2 EXITnn (module:entry)

Explanation: The OS/EM controller manager for JES2 has detected that the exit point nn has been passed an invalid return code from the specified user exit.

rc: The return code passed back by the user exit.

jes2: The Jesname of the JES2 System.

nn: JES2 exit number.

module:entry: The load module and entry names of the user exit.

Source: OS$J2SCx

Operator Response: Contact System Programmer.

OS$J2R090

ABEND IN jes2 module(entry) AT OFFSET xxxxx

Explanation: An ABEND has occurred in a JES2 exit

jes2: The Jesname of the JES2 System.

module(entry): The load module and entry name of the exit that had the ABEND.

xxxxx: The offset into the exit where the ABEND occurred.

Source: OS$J2ERx

System Action: The exit module is disabled and an SVC dump is taken.

Operator Response: Contact System Programmer.

System Programmer Response: Perform the corrective action as indicated by the other messages that accompany this one, perform a LLA, REFRESH and reload the JES2 User exit using the OS/EM ISPF reload facility. Contact OS/EM support for assistance in problem resolution.

OS$J2M091

name EXIT module DISABLED

Explanation: The specified user exit is disabled, no services will be provided by the effected component.

name: The exit name.

module: The module used for this exit.

Source: OS$J2MCx

System Action: The exit is disabled.

Operator Response: Contact System Programmer.

System Programmer Response: Check the other messages and take the appropriate action as indicated. Contact OS/EM support for assistance in problem resolution.

OS$J2S091

name EXIT module DISABLED

Explanation: The specified user exit is disabled, no services will be provided by the effected component.

name: The exit name.

module: The module used for this exit.

Source: OS$J2SCx

System Action: The exit is disabled.

Operator Response: Contact System Programmer.

System Programmer Response: Check the other messages and take the appropriate action as indicated. Contact OS/EM support for assistance in problem resolution.

OS$02F091

name EXIT module DISABLED

Explanation: The specified user exit is disabled, no services will be provided by the effected component.

name: The exit name.

module: The module used for this exit.

Source: OS$0002F

System Action: The exit is disabled.

Operator Response: Contact System Programmer.

System Programmer Response: Check the other messages and take the appropriate action as indicated. Contact OS/EM support for assistance in problem resolution.

OS$J2M092

jes2 EXITnn (module:exitname) DEACTIVATED

Explanation: The abend has occurred in JES2 EXITnn User exit module:exitname and the exit point has been deactivated.

jes2: The Jesname of the JES2 System.

nn: JES2 exit number.

module:exitname: Module that abended.

Source: OS$J2MCx

System Action: The module module:exitname for exit point nn is disabled, a SVC dump is taken and the module:exitname is taken out of service.

Operator Response: Contact System Programmer.

OS$J2S092

jes2 EXITnn (module:exitname) DEACTIVATED

Explanation: The abend has occurred in JES2 EXITnn User exit module:exitname and the exit point has been deactivated.

jes2: The Jesname of the JES2 System.

nn: JES2 exit number.

module:exitname: Module that abended.

Source: OS$J2SCx

System Action: The module module:exitname for exit point nn is disabled, a SVC dump is taken and the module:exitname is taken out of service.

Operator Response: Contact System Programmer.

OS$ACN093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$ALCCN

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

System Programmer Response: Review the return codes for the SDUMP macro in Application Development Reference and determine the reason for the failure. Contact OS/EM support for assistance in problem resolution.

OS$ALC093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$ALLOC

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$ASY093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$ASYNC

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$CMD093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$CMD

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$COM093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$COMM

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$DCN093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$DADCN

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$DC1093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$DCB1

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$EXR093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$EXRTN

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$FRA093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$FRACN

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$FTN093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$FRRTN

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$HCN093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$HSMCN

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$IAT093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$INTK

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$ICN093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$ISPCN

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$IPL093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$IPL

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$JS2093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$JES2B,OS$JES2G

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$J2M093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$J2MCx

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$J2R093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$J2ERx

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$J2S093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$J2SCx

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$J3E093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$J3ECx

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$J3S093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$J3SVC

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$LOK093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$LOCK

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$RCN093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$RACCN

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$SCN093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$SAFCN,OS$SMFCN

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$TCN093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$TSOCN

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$THI093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$THRDI

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$TPS093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$TPSHR

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$UJI093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$UJI

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$USI093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$USI

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$VCN093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$SVCCN

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$X05093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$J2X05

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$1PL093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$IPL1

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$02F093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$0002F

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$2H5093

SDUMP FAILED IN MODULE module, RC = rc RSN = reason

Explanation: OS/EM controller module attempted to take a SVC dump for a User exit program or a OS/EM optional program and the SDUMP macro failed.

module: The load module name.

rc: Return code.

reason: Reason code.

Source: OS$J2H5x

System Action: The SVC dump for the abending module fails and no dump will be taken for the abending exit.

Operator Response: Contact the System Programmer.

OS$DAP094

NO OPERANDS PERMITTED WITH type DELETE

Explanation: The OS$CNTL command for Quick Pool has been passed a delete request for either a volume group, a dataset name group or a Quick Pool definition. No other operands are allowed on a delete.

type:

DSNGROUP group name

VOLGROUP group name

POOL pool name

Source: OS$POOL

System Action: The command is ignored, and the group is not deleted.

Operator Response: None.

System Programmer Response: Correct the OS$CNTL command so that no other operands are specified. If using the the ISPF interface verify that no other operands are specified for the definition being deleted. Contact OS/EM support for assistance in problem resolution.

OS$ACT096

JOB jobname ABENDED TIME = hh.mm.ss, DATE = mm/dd/yy

Explanation: The OS/EM optional ABEND MESSAGE has been requested for Jobs that Abend in this Jobclass.

jobname: Jobname.

hh.mm.ss: Time in hours, minutes and seconds.

mm/dd/yy: Date in month, day and year.

Source: OS$ACTRT

System Action: This message is left in a Non-deletable mode for the Operator to take appropriate action.

Operator Response: Notify the person responsible for running the Job that it has Abended, and delete the message from the console.

System Programmer Response: None.

OS$ACT097

jobname/jobstep/ssssssss/program COND = rc

Explanation: The OS/EM optional STEPENDWTO has been requested for Jobs.

jobname: Jobname.

jobstep: Job step name.

ssssssss: Proc step name.

program: Program name.

rc: Return Code for this step.

Source: OS$ACTRT

System Action: Job continues, Information only.

Operator Response: None.

System Programmer Response: None.

OS$ACT098

JOB jobname WAS CANCELED BECAUSE -

Explanation: The OS/EM optional CANCEL WTOR has been requested for Jobs that are cancelled by the Operator in this Jobclass.

jobname: Jobname.

Source: OS$ACTRT

System Action: Job waits for the reply from the Operator.

Operator Response: Reply with the reason as to why the Job was cancelled.

System Programmer Response: None.

OS$ACT099

JOB jobname CANCELED DUE TO NOT CATALOGED 2

Explanation: The OS/EM optional NOT CATALOGED 2 feature is active in FAIL mode, and this job has created a dataset with the NOT CATALOGED 2 condition, and the option in effect for the NOT CATALOGED 2 condition is to cancel the Job.

jobname: Jobname.

Source: OS$ACTRT

System Action: The Job is cancelled.

Operator Response: None.

System Programmer Response: None.

User Response: Correct the JCL, or delete and uncatalog the dataset at the beginning of the Job.

OS$X06100

USER userid NOT AUTHORIZED TO USE function PARM 'value'

Explanation: The OS/EM optional facilities for checking JCL parameters has been requested and the User does not have access to both the function and the value specified. Other messages from optional RACROUTE checking with an external security system may also appear i.e. ICH for RACF etc. The actual resource type checked if using an optional external security system is: function.value.

userid: Userid that is not authorized.

function: OS/EM optional resource type to be checked.

value: Value of the resource to be checked.

Source: OS$J2X06

System Action: The Job is cancelled during reader/interpreter processing.

Operator Response: None.

System Programmer Response: None.

User Response: Resubmit the Job using a resource type that you have access to. If other messages appear ICH for RACF or other security facility messages (CA-TOPSECRET, or CA-ACF2), contact Security Administration and request that you be granted access to the resource and value in this message. Else contact the System programmer and request that you be granted access to the resource and value in this message.

OS$ACN101

ssssssss EXIT INVALID RETURN CODE rc FROM program

Explanation: The OS/EM controller manager has detected that the exit point ssssss has been passed return code rc from module program and it was not a valid return code.

ssssssss: MVS Exit point.

rc: Return code.

program: Module that set the invalid return code.

Source: OS$ALCCN

System Action: The module program for exit point ssssssss is disabled, because the ssssss exit requested optional valid return code checking or module ppppppp returned an invalid return code for exit ssssssss.

Operator Response: Contact System Programmer.

System Programmer Response: Review the User exit program to determine why the exit returned an invalid return code. Correct the User exit program, and reload the USer exit with OS/EM reload facilities.

OS$DCN101

ssssssss EXIT INVALID RETURN CODE rc FROM program

Explanation: The OS/EM controller manager has detected that the exit point ssssss has been passed return code rc from module program and it was not a valid return code.

ssssssss: MVS Exit point.

rc: Return code.

program: Module that set the invalid return code.

Source: OS$DADCN

Operator Response: Contact System Programmer.

OS$FRA101

ssssssss EXIT INVALID RETURN CODE rc FROM program

Explanation: The OS/EM controller manager has detected that the exit point ssssss has been passed return code rc from module program and it was not a valid return code.

ssssssss: MVS Exit point.

rc: Return code.

program: Module that set the invalid return code.

Source: OS$FRACN

Operator Response: Contact System Programmer.

OS$HCN101

ssssssss EXIT INVALID RETURN CODE rc FROM program

Explanation: The OS/EM controller manager has detected that the exit point ssssss has been passed return code rc from module program and it was not a valid return code.

ssssssss: MVS Exit point.

rc: Return code.

program: Module that set the invalid return code.

Source: OS$HSMCN

Operator Response: Contact System Programmer.

OS$ICN101

ssssssss EXIT INVALID RETURN CODE rc FROM program

Explanation: The OS/EM controller manager has detected that the exit point ssssss has been passed return code rc from module program and it was not a valid return code.

ssssssss: MVS Exit point.

rc: Return code.

program: Module that set the invalid return code.

Source: OS$ISPCN

Operator Response: Contact System Programmer.

OS$RCN101

ssssssss EXIT INVALID RETURN CODE rc FROM program

Explanation: The OS/EM controller manager has detected that the exit point ssssss has been passed return code rc from module program and it was not a valid return code.

ssssssss: MVS Exit point.

rc: Return code.

program: Module that set the invalid return code.

Source: OS$RACCN

Operator Response: Contact System Programmer.

OS$SCN101

ssssssss EXIT INVALID RETURN CODE rc FROM program

Explanation: The OS/EM controller manager has detected that the exit point ssssss has been passed return code rc from module program and it was not a valid return code.

ssssssss: MVS Exit point.

rc: Return code.

program: Module that set the invalid return code.

Source: OS$SAFCN,OS$SMFCN

Operator Response: Contact System Programmer.

OS$TCN101

ssssssss EXIT INVALID RETURN CODE rc FROM program

Explanation: The OS/EM controller manager has detected that the exit point ssssss has been passed return code rc from module program and it was not a valid return code.

ssssssss: MVS Exit point.

rc: Return code.

program: Module that set the invalid return code.

Source: OS$TSOCN

Operator Response: Contact System Programmer.

OS$J3E102

JES3 EXIT nn INVALID RETURN CODE rc FROM program

Explanation: The OS/EM JES3 exit controller has detected that JES3 nn exit point has been passed return code rc from module program.

nn: JES3 exit number.

rc: Return code.

program: Module that set the invalid return code.

Source: OS$J3ECN

System Action: The module program in JES3 exit point nn is disabled, because the JES3 exit nn requested optional valid return code checking or module ppppppp returned an invalid return code for JES3 exit nn.

Operator Response: Contact System Programmer.

System Programmer Response: Review the JES3 exit program to determine why the exit returned an invalid return code. Correct the JES3 exit program, and reload the JES3 exit with OS/EM reload facilities.

OS$02F103

*WARNING* JOB WOULD FAIL FOR NOT CATALOGED 2

Explanation: The OS/EM optional NOT CATALOGED 2 feature is active in WARN mode, and this job has created a dataset with the NOT CATALOGED 2 condition. If OS/EM optional NOT CATALOGED 2 feature is implemented in fail mode, the Job would be cancelled.

Source: OS$0002F.

System Action: The Job continues creating an uncataloged dataset.

Operator Response: None.

System Programmer Response: None.

User Response: Correct the JCL, or delete and uncatalog the dataset at the beginning of the Job.

OS$REL104

NO OS/EM FUNCTIONS ACTIVE - MODULE NOT LOADED

Explanation: A optional OS/EM module was requested to be reloaded, using the OS/EM reload facility but the module was not previously loaded.

Source: OS$RELOD

System Action: The module is not reloaded because there are have been no optional OS/EM features selected, that require the module selected for reload to be present.

Operator Response: None.

System Programmer Response: None.

OS$DB4105

*WARNING* DYNAMIC ALLOCATION WOULD FAIL

Explanation: The OS/EM optional tape control by Jobclass is active in WARN mode, and this job has exceeded the number of tape devices allowed in this Jobclass. Also see message OS$xxx038. If OS/EM tape control by Jobclass is implemented in fail mode, the Job would be cancelled.

Source: OS$DB401

System Action: Allocation continues.

Operator Response: None.

System Programmer Response: None.

User Response: Submit the Job in a class that allows the the number of tape devices required.

OS$F10106

USER userid NOT DEFINED TO RACF - SUBMIT DISALLOWED

Explanation: During TSO SUBMIT processing, OS/EM options have requested verification of the USERID on the JOBCARD and the USERID that is specified on the JOB card is not a valid RACF USER.

userid: Userid that is not defined to RACF.

Source: OS$EFF10

System Action: The JOB submission is stopped.

Operator Response: None.

System Programmer Response: None.

User Response: Code a valid RACF USERID on the JOBCARD and re-submit the JOB.

OS$F10107

USER userid NOT AUTHORIZED TO SUBMIT JOBS IN CLASS x

Explanation: During TSO SUBMIT processing, OS/EM options have requested Jobclass access enforcement and the Jobclass that is specified on the JOB card is not a valid Jobclass for the USER submitting the JOB.

userid: Userid that is not authorized.

x: Jobclass Job is being submitted to.

Source: OS$EFF10

System Action: The JOB submission is stopped.

Operator Response: None.

System Programmer Response: None.

User Response: Change the Jobclass to one that the USER has access to.

OS$F10108

JOBNAME MUST START WITH USERID

Explanation: During TSO SUBMIT processing, OS/EM options have requested enforcement of Jobname standards, and the first characters of the Jobname must contain the USERID of the USER submitting the JOB.

Source: OS$EFF10

System Action: The JOB submission is stopped.

Operator Response: None.

System Programmer Response: None.

User Response: Change the Jobname to include the USERID of the USER submitting the Job.

OS$X02109

UNABLE TO ADD USERID/PASSWORD TO JOBCARD

Explanation: During TSO SUBMIT processing, OS/EM options have requested that the USERID and/or PASSWORD parameter(s) be added to all Jobs and the USERID and/or PASSWORD parameter(s) cannot be added to the Jobcard because the account number continues into column 71 and there is no room to add a comma to continue the Jobcard.

Source: OS$J2X02

System Action: The JOB submission continues without the USERID and/or PASSWORD parameter(s) being added to the Jobcard.

Operator Response: None.

System Programmer Response: None.

JES3 EXIT nn NOT {RE}LOADED

Explanation: During the execution of a OS$CNTL command for either the loading or reloading of JES3 exit number nn an error condition has stopped the command from completing successfully.

nn: JES3 exit number.

Source: OS$J3SVC

System Action: The OS$CNTL fails and the JES3 exit nn is not loaded or reloaded.

Operator Response: None.

System Programmer Response: Other messages will follow OS$xxx013, and OS$xxx017. Message OS$xxx013 will give the reason for either the LOAD or RELOAD failure. Take the corrective action as indicated by OS$xxx013 and re-issue the command. Contact OS/EM support for assistance in problem resolution.

OS$UTL114

SHOULD JOB jobname type CPU LIMIT BE EXTENDED nnnn SECONDS ? (Y OR N)

Explanation: The JOB CPU time limit for JOB jobname has expired, and the options selected for OS/EM require a confirmation by the operator to extend the JOB jobname CPU time.

jobname: JOBNAME.

type: JOB, STEP.

nnnn: The amount of CPU seconds that JOB jobname will be extended if the operator reply is Y.

Source: OS$UTL

System Action: The JOB jobname stops executing until the operator responds to the message.

Operator Response: Reply Y if the JOB should continue or reply N if the JOB should stop. If the reply is N, the JOB jobname will abend with System Abend S322.

System Programmer Response: None.

OS$UTL115

JOB jobname WAITING FOR REPLY TO MESSAGE nn

Explanation: The SMF wait time limit for JOB jobname has expired, and the options selected for OS/EM require a confirmation by the operator to extend the JOB jobname. Message OS$UTL115 has been issued and the SMF Wait Time as specified in member SMFPRM00 in SYS1.PARMLIB has expired and the operator has not replied to message nn.

jobname: JOBNAME.

nn: The message number for OS$UTL114 that needs a reply.

Source: OS$UTL

System Action: The JOB jobname stops executing until the operator responds to message nn.

Operator Response: Reply as indicated in message OS$UTL114.

System Programmer Response: None.

OS$UTL116

JOB jobname WAITING FOR MOUNT ON DEVICE dddd. VOLSER=vvvvvv

Explanation: The SMF wait time limit for JOB jobname has expired, and mount for volume serial vvvvvv on device dddd has not been completed.

jobname: JOBNAME.

dddd: The device number.

vvvvvv: Volume serial.

Source: OS$UTL

System Action: The JOB jobname continues to wait for the operator to mount volume serial vvvvvvv on device dddd.

Operator Response: Mount volume serial vvvvvv on device dddd.

System Programmer Response: None.

OS$UTL117

JOB jobname WAITING FOR DEVICE dddd TO BECOME READY

Explanation: The SMF wait time limit for JOB jobname has expired, and device dddd is not ready.

jobname: JOBNAME.

dddd: The device number.

Source: OS$UTL

System Action: The JOB jobname continues to wait for the operator to ready device dddd.

Operator Response: Ready device dddd.

System Programmer Response: None.

OS$UTL118

STEP CPU TIME LIMIT FOR JOB jobname EXTENDED BY nnnn SECONDS

Explanation: The step CPU time limit for JOB jobname has expired, and OS/EM has extended the CPU step time by nnnn seconds.

jobname: JOBNAME.

nnnn: The amount of CPU seconds that the step for JOB jobname been extended.

Source: OS$UTL

System Action: The JOB jobname continues to execute.

Operator Response: None.

System Programmer Response: None.

OS$UTL119

WAIT TIME LIMIT FOR JOB jobname EXTENDED BY nnnn MINUTES

Explanation: The wait time limit as specified in member SMFPRM00 in SYS1.PARMLIB has expired for JOB jobname, and OS/EM has extended the wait time limit by nnnn minutes.

jobname: Jobname.

nnnn: The amount of wait time in minutes that the JOB has been extended.

Source: OS$UTL

System Action: The JOB jobname continues to execute.

Operator Response: None.

System Programmer Response: None.

OS$UTL120

JOB CPU TIME LIMIT FOR JOB jobname EXTENDED BY nnnn SECONDS

Explanation: The JOB CPU time limit for JOB jobname has expired, and OS/EM has extended the CPU JOB time by nnnn seconds.

jobname: JOBNAME.

nnnn: The amount of CPU seconds that JOB jobname been extended.

Source: OS$UTL

System Action: The JOB jobname continues to execute.

Operator Response: None.

System Programmer Response: None.

OS$ACT121

jobname MAXRC=rc CPU=hh.mm.ss ELAPSED=hh.mm I/O=xxxx

Explanation: The JOB jobname has completed.

jobname: JOBNAME.

rc: The maximum return code for the JOB jobname.

CPU=hh.mm.ss: CPU time for this JOB in hours, minutes and seconds.

ELAPSED=hh.mm: Elapsed time for this JOB in hours and minutes.

xxxx: The total Input / Output request for JOB jobname.

Source: OS$ACTRT

System Action: The JOB jobname has completed execution.

Operator Response: None.

System Programmer Response: None.

OS$UJI122

JOB jobname NOT ALLOWED TO EXECUTE IN JOBCLASS x

Explanation: During Job initialization processing, OS/EM options have requested Jobclass / Jobname authorization checking, and the Jobname specified on the JOB card is not allowed to execute in the Jobclass requested.

jobname: Jobclass requested.

x: Jobclass Job is being submitted to.

Source: OS$UJI

System Action: The JOB is cancelled.

Operator Response: None.

System Programmer Response: None.

User Response: Change the Jobclass to one that the Jobname has access to.

OS$PRE123

RENAME FAILED

Explanation: The OS/EM optional QuickPool function has been activated in FAIL mode, and this job has attempted to rename datasets on a volume where they are not allowed. Message OS$PRE125 is also issued.

Source: OS$PRE00

System Action: The RENAME fails.

Operator Response: None.

System Programmer Response: None.

User Response: Allocate the new name for the dataset that you are attempting to rename on a volume where the newname dataset is allowed, and copy the the old named dataset to the new named dataset. Contact the System Programmer for information on the QuickPool implementation at your site.

OS$PRE124

WARNING - RENAME WOULD FAIL

Explanation: The OS/EM optional QuickPool function has been activated in WARN mode, and this job has renamed datasets on a volume where they are not allowed, and if the QuickPool function is activated in FAIL mode the rename will fail. Message OS$PRE125 is also issued.

Source: OS$PRE00

System Action: The RENAME continues.

Operator Response: None.

System Programmer Response: None.

User Response: None.

type OPTION IS NOT ENABLED

Explanation: During OS/EM command processing an optional OS/EM parameter has been specified, but your Option code does not allow the use of this feature.

type:

HSM OPTIMIZER

JES3

Job Class Standards

QuickPool

Source: OS$ALLO0,OS$ALLO1

System Action: The OS$CNTL command being processed is ignored.

Operator Response: None.

System Programmer Response: Check the command format in this manual for the function being performed. If using the ISPF interface, check the command format for the verb being used. Contact OS/EM support for assistance in obtaining the use of the requested option.

OS$COD139

type OPTION IS NOT ENABLED

Explanation: During OS/EM command processing an optional OS/EM parameter has been specified, but your Option code does not allow the use of this feature.

type:

HSM OPTIMIZER

JES3

Job Class Standards

QuickPool

Source: OS$CODE

System Action: The OS$CNTL command being processed is ignored.

Operator Response: None.

OS$DAD139

type OPTION IS NOT ENABLED

Explanation: During OS/EM command processing an optional OS/EM parameter has been specified, but your Option code does not allow the use of this feature.

type:

HSM OPTIMIZER

JES3

Job Class Standards

QuickPool

Source: OS$DASD

System Action: The OS$CNTL command being processed is ignored.

Operator Response: None.

OS$DAP139

type OPTION IS NOT ENABLED

Explanation: During OS/EM command processing an optional OS/EM parameter has been specified, but your Option code does not allow the use of this feature.

type:

HSM OPTIMIZER

JES3

Job Class Standards

QuickPool

Source: OS$POOL

System Action: The OS$CNTL command being processed is ignored.

Operator Response: None.

OS$HSM139

type OPTION IS NOT ENABLED

Explanation: During OS/EM command processing an optional OS/EM parameter has been specified, but your Option code does not allow the use of this feature.

type:

HSM OPTIMIZER

JES3

Job Class Standards

QuickPool

Source: OS$HSM0,OS$HSM1,OS$HSM2,OS$HSM3

System Action: The OS$CNTL command being processed is ignored.

Operator Response: None.

OS$ISP139

type OPTION IS NOT ENABLED

Explanation: During OS/EM command processing an optional OS/EM parameter has been specified, but your Option code does not allow the use of this feature.

type:

HSM OPTIMIZER

JES3

Job Class Standards

QuickPool

Source: OS$ISPF

System Action: The OS$CNTL command being processed is ignored.

Operator Response: None.

OS$JS2139

type OPTION IS NOT ENABLED

Explanation: During OS/EM command processing an optional OS/EM parameter has been specified, but your Option code does not allow the use of this feature.

type:

HSM OPTIMIZER

JES3

Job Class Standards

QuickPool

Source: OS$JES2A through OS$JES2H

System Action: The OS$CNTL command being processed is ignored.

Operator Response: None.

OS$JS3139

type OPTION IS NOT ENABLED

Explanation: During OS/EM command processing an optional OS/EM parameter has been specified, but your Option code does not allow the use of this feature.

type:

HSM OPTIMIZER

JES3

Job Class Standards

QuickPool

Source: OS$JES3

System Action: The OS$CNTL command being processed is ignored.

Operator Response: None.

OS$MIS139

type OPTION IS NOT ENABLED

Explanation: During OS/EM command processing an optional OS/EM parameter has been specified, but your Option code does not allow the use of this feature.

type:

HSM OPTIMIZER

JES3

Job Class Standards

QuickPool

Source: OS$MISC

System Action: The OS$CNTL command being processed is ignored.

Operator Response: None.

OS$RAC139

type OPTION IS NOT ENABLED

Explanation: During OS/EM command processing an optional OS/EM parameter has been specified, but your Option code does not allow the use of this feature.

type:

HSM OPTIMIZER

JES3

Job Class Standards

QuickPool

Source: OS$RACF

System Action: The OS$CNTL command being processed is ignored.

Operator Response: None.

OS$SAF139

type OPTION IS NOT ENABLED

Explanation: During OS/EM command processing an optional OS/EM parameter has been specified, but your Option code does not allow the use of this feature.

type:

HSM OPTIMIZER

JES3

Job Class Standards

QuickPool

Source: OS$SAF

System Action: The OS$CNTL command being processed is ignored.

Operator Response: None.

OS$SMF139

type OPTION IS NOT ENABLED

Explanation: During OS/EM command processing an optional OS/EM parameter has been specified, but your Option code does not allow the use of this feature.

type:

HSM OPTIMIZER

JES3

Job Class Standards

QuickPool

Source: OS$SMF0,OS$SMF1,OS$SMF2,OS$SMF3,OS$SMF4,OS$SMF5

System Action: The OS$CNTL command being processed is ignored.

Operator Response: None.

OS$TSO139

type OPTION IS NOT ENABLED

Explanation: During OS/EM command processing an optional OS/EM parameter has been specified, but your Option code does not allow the use of this feature.

type:

HSM OPTIMIZER

JES3

Job Class Standards

QuickPool

Source: OS$TSO

System Action: The OS$CNTL command being processed is ignored.

Operator Response: None.

OS$CMD140

DEVICE addr IS CONTROLLED BY OS/EM xxxx

Explanation: The OS/EM optional restrict device control or tape share control is active, and the Operator has attempted to VARY the device online or offline; has entered the SWAP command or the Operator has responded to message 'IEF238D jobname REPLY DEVICE NAME OR CANCEL' with the device number of the controlled device. For tape share, the device is not currently available because it is online on another system or it is flagged to be offline to this system or all systems.

addr: The controlled device address

xxxx: The OS/EM option in control of the device, either restrict device or tape share.

Source: OS$CMD

System Action: The command or Reply is ignored.

Operator Response: For tape share, choose another device and reissue the command. If this specific device must be used, issue a display command for the device, determine to what system the device is allocated or if the device is flagged to be locally or globally offline. If the device is online to another system, issue a vary offline command on that system. If the device is flagged as locally or globally offline, and it is now permissable to use the device on this system, issue a command to bring the device locally or globally online. Then reissue the original command.

System Programmer Response: None

OS$CMD141

RE-ENTER xxxxx

Explanation: The OS/EM optional restrict device control is activated, and the Operator has attempted to VARY the restricted device online or offline, or the Operator has responded to message 'IEF238D jobname REPLY DEVICE NAME OR CANCEL' with the device number of the restricted device.

xxxx: REPLY or VARY Command.

Source: OS$CMD2

System Action: The command or Reply is ignored.

Operator Response: If the message is issued as the result of a VARY ONLINE/OFFLINE command, verify the device number was entered correctly, because the device is controlled by OS/EM device restriction. If the device is required to be varied online/offline, contact the System Programmer so that they can remove the device from the OS/EM device restriction options. If the message is the result of message IEF238D, respond to message IEF238D with a device that is not controlled by OS/EM optional device restriction control.

System Programmer Response: Remove the device from the OS/EM device restriction processing if required.

OS$ALC143

CANNOT CONTROL DEVICE devnum

Explanation: Device is not available for OS/EM control because it is in use by OLTEP, a SYSRES device, a console, controlled by JES3 or has no paths available.

devnum: Device number.

Source: OS$ALLO1

System Action: OS/EM does not attempt to control the device.

Operator Response: Contact System Programmer.

System Programmer Response: Do a DU command to determine the problem and correct it.

OS$RD1144

DEFINE OF DISCRETE PROFILE DISALLOWED

Explanation: OS/EM has been requested to disallow discrete profile creation and an attempt has been made to define a discrete profile.

Source: OS$RDX01

System Action: The profile is not created.

Operator Response: None. Informational message only.

System Programmer Response: None. Informational message only.

OS$RD1145

WARNING - DEFINE OF DISCRETE PROFILE WOULD BE DISALLOWED

Explanation: The discrete profile control feature of OS/EM is operating in WARN mode and a request to define a discrete profile is being processed.

Source: OS$RDX01

System Action: The DEFINE continues.

Operator Response: None. Informational message only.

System Programmer Response: None. Informational message only.

OS$X02146

JES2 macroname MACRO FAILED. RC = nn.

Explanation: A JES2 macro did not complete properly.

macroname: The name of the failed JES2 macro.

rc: The return code from the macro execution.

Source: OS$J2X02

System Action: OS/EM continues.

Operator Response: Notify System Programmer.

System Programmer Response: Check for other messages and correct errors. Contact OS/EM support for assistance in problem resolution.

OS$X04146

JES2 macroname MACRO FAILED. RC = nn.

Explanation: A JES2 macro did not complete properly.

macroname: The name of the failed JES2 macro.

rc: The return code from the macro execution.

Source: OS$J2X04

System Action: OS/EM continues.

Operator Response: Notify System Programmer.

System Programmer Response: Check for other messages and correct errors. Contact OS/EM support for assistance in problem resolution.

OS$X05146

JES2 macroname MACRO FAILED. RC = nn.

Explanation: A JES2 macro did not complete properly.

macroname: The name of the failed JES2 macro.

rc: The return code from the macro execution.

Source: OS$J2X05

System Action: OS/EM continues.

Operator Response: Notify System Programmer.

System Programmer Response: Check for other messages and correct errors. Contact OS/EM support for assistance in problem resolution.

OS$X06146

JES2 macroname MACRO FAILED. RC = nn.

Explanation: A JES2 macro did not complete properly.

macroname: The name of the failed JES2 macro.

rc: The return code from the macro execution.

Source: OS$J2X06

System Action: OS/EM continues.

Operator Response: Notify System Programmer.

System Programmer Response: Check for other messages and correct errors. Contact OS/EM support for assistance in problem resolution.

OS$X24146

JES2 macroname MACRO FAILED. RC = nn.

Explanation: A JES2 macro did not complete properly.

macroname: The name of the failed JES2 macro.

rc: The return code from the macro execution.

Source: OS$J2X24

System Action: OS/EM continues.

Operator Response: Notify System Programmer.

System Programmer Response: Check for other messages and correct errors. Contact OS/EM support for assistance in problem resolution.

OS$X32146

JES2 macroname MACRO FAILED. RC = nn.

Explanation: A JES2 macro did not complete properly.

macroname: The name of the failed JES2 macro.

rc: The return code from the macro execution.

Source: OS$J2N32

System Action: OS/EM continues.

Operator Response: Notify System Programmer.

System Programmer Response: Check for other messages and correct errors. Contact OS/EM support for assistance in problem resolution.

OS$X44146

JES2 macroname MACRO FAILED. RC = nn.

Explanation: A JES2 macro did not complete properly.

macroname: The name of the failed JES2 macro.

rc: The return code from the macro execution.

Source: OS$J2X44

System Action: OS/EM continues.

Operator Response: Notify System Programmer.

System Programmer Response: Check for other messages and correct errors. Contact OS/EM support for assistance in problem resolution.

OS$2G3146

JES2 macroname MACRO FAILED. RC = nn.

Explanation: A JES2 macro did not complete properly.

macroname: The name of the failed JES2 macro.

rc: The return code from the macro execution.

Source: OS$J2G3x

System Action: OS/EM continues.

Operator Response: Notify System Programmer.

System Programmer Response: Check for other messages and correct errors. Contact OS/EM support for assistance in problem resolution.

OS$2H0146

JES2 macroname MACRO FAILED. RC = nn.

Explanation: A JES2 macro did not complete properly.

macroname: The name of the failed JES2 macro.

rc: The return code from the macro execution.

Source: OS$J2H0x

System Action: OS/EM continues.

Operator Response: Notify System Programmer.

System Programmer Response: Check for other messages and correct errors. Contact OS/EM support for assistance in problem resolution.

OS$2L0146

JES2 macroname MACRO FAILED. RC = nn.

Explanation: A JES2 macro did not complete properly.

macroname: The name of the failed JES2 macro.

rc: The return code from the macro execution.

Source: OS$J2L0x

System Action: OS/EM continues.

Operator Response: Notify System Programmer.

System Programmer Response: Check for other messages and correct errors. Contact OS/EM support for assistance in problem resolution.

OS$2MM146

JES2 macroname MACRO FAILED. RC = nn.

Explanation: A JES2 macro did not complete properly.

macroname: The name of the failed JES2 macro.

rc: The return code from the macro execution.

Source: OS$J2MMx

System Action: OS/EM continues.

Operator Response: Notify System Programmer.

System Programmer Response: Check for other messages and correct errors. Contact OS/EM support for assistance in problem resolution.

OS$2M3146

JES2 macroname MACRO FAILED. RC = nn.

Explanation: A JES2 macro did not complete properly.

macroname: The name of the failed JES2 macro.

rc: The return code from the macro execution.

Source: OS$J2M3x

System Action: OS/EM continues.

Operator Response: Notify System Programmer.

System Programmer Response: Check for other messages and correct errors. Contact OS/EM support for assistance in problem resolution.

OS$IPL147

PAGEFIX OF SSCT FOR SUBSYSTEM subsys FAILED. RC = nn.

Explanation: The PGSER macro to pagefix the SSCT's before the OS/EM SSCT failed.

subsys: Name of the subsystem.

nn: Return Code.

Source: OS$IPL

System Action: OS$IPL continues. There is a slight chance that some OS/EM function will get an S0C4 abend attempting to locate the OS/EM SSCT.

Operator Response: Contact System Programmer.

System Programmer Response: Determine cause of pagefix failure and take appropriate action.

OS$X06148

JOB CPU TIME LIMIT SET TO (mm,ss)

Explanation: The jobs CPU time limit has been reset to (mm,ss) because of the JES2 Exit6 OS/EM Optional Control settings.

mm: minutes.

ss: seconds.

Source: OS$J2X06

System Action: The execution time limit is reset.

Operator Response: None. Informational message only.

System Programmer Response: None. Informational message only.

OS$USO149

SYSOUT LIMIT FOR JOB jjjjjjjj DDNAME dddddddd EXTENDED BY nn LINES

Explanation: The sysout limit for the specified job has been extended by the number of lines shown. The extension was given because of the IEFUSO OS/EM Optional Control settings.

jjjjjjjj: Jobname.

dddddddd: DDNAME.

nn: number of lines.

Source: OS$USO

System Action: The sysout limit is extended.

Operator Response: None. Informational message only.

System Programmer Response: None. Informational message only.

OS$IPL150

CSVDYNEX LIST FAILED, RC= xx RSN= yy

Explanation: During IPL processing OS/EM was unable to obtain a list of the exits in use by the MVS Dynamic Exit Facility. This will disable all OS/EM processing for any exit that should be specified to the Dynamic Exit Facility.

xx: The return code from the system request.

yy: The reason code from the system request.

Source: OS$IPL

System Action: Processing continues.

Operator Response: Notify System Programmer.

System Programmer Response: Verify that there is a valid entry in the 'PROG=' parameter of your IEASYSxx member in SYS1.PARMLIB pointing to the 'EXIT ADD' statements.

OS$IPL151

ADD OF OS/EM EXIT modname TO EXIT POINT extpnt FAILED, CSVDYNEX RC = xx RSN = yy

Explanation: During IPL processing OS/EM determined that the OS/EM interface module was not defined to the MVS Dynamic Exit Facility for the specified exit point. This will disable all OS/EM processing which would be controlled by the specified interface module.

modname: The exit load module name.

extpnt: The exit point name.

xx: The return code from the CSVDYNEX request.

yy: The reason code from the CSVDYNEX request.

Source: OS$IPL

System Action: Processing continues.

Operator Response: Notify System Programmer.

System Programmer Response: Verify that there is a valid entry in the 'PROG=' parameter of your IEASYSxx member in SYS1.PARMLIB pointing to the 'EXIT ADD' statements.

OS$USO152

SHOULD SYSOUT LIMIT FOR JOB xxxxxxxx DDNAME yyyyyyyy BE EXTENDED BY nnnn LINES ? (Y OR N)

Explanation: OS/EM's Optional Control settings for IEFUSO specifies that before sysout limits are extended the operator must OK the extension.

xxxxxxxx: The job name.

yyyyyyyy: The ddname that will be extended.

nnnn: The number of lines that the SYSOUT dataset will be extended by.

Source: OS$USO

System Action: Waits for the Operator to respond.

Operator Response: Respond Y to have the jobs sysout limit increased. Respond N to have the job cancelled. Be aware that multiple extensions may have already been granted.

System Programmer Response: None.

OS$X32153

xxxxxxxx (JOBnnnn) STARTED AT hh mm

Explanation: OS/EM's JES2 Exit32 Optional Control settings have been set to issue a message when a job starts execution.

xxxxxxxx: Jobname.

nnnn: Job number.

hh mm: Time of day.

Source: OS$J2N32,OS$J2X32

System Action: The message is sent to the TSO ID specified on the NOTIFY parameter of the JOBCARD.

Operator Response: None. Informational message.

System Programmer Response: None. Informational message.

OS$REL154

SECURITY SYSTEM IS NOT RACF

Explanation: A RACF table reload has been attempted but RACF is not the active security system.

Source: OS$RELOD

System Action: The table is not reloaded.

Operator Response: None.

System Programmer Response: None.

OS$REL155

RACF xxxxxxxx MODULE HAS INVALID FORMAT

Explanation: The format of the RACF table to be reloaded is invalid.

xxxxxxxx: Name of RACF module.

Source: OS$RELOD

System Action: The table is not reloaded.

Operator Response: None.

System Programmer Response: Correct the table format.

OS$SVU156

SVC TYPE IS REQUIRED TO PROCESS RELOAD

Explanation: The SVC type was not specified on a SVC reload command.

Source: OS$SVCUD

System Action: The SVC is not reloaded.

Operator Response: None.

System Programmer Response: Specify the correct SVC type and retry the command.

OS$ALC157

DEVICE xxxx NOT PRESENT ON SYSTEM

Explanation: OS/EM was requested to control a device which is not connected to the system.

xxxx: Device ID.

Source: OS$ALLO1

System Action: The OS/EM command is ignored. Other devices specified in the same command may be processed however.

Operator Response: Specify a valid device number.

System Programmer Response: None.

OS$INT158

OS/EM INITIALIZATION FAILED. REPLY ''U'' TO ACKNOWLEDGE.

Explanation: An error has occurred during OS/EM initialization. No valid authorization code was supplied.

Source: OS$INIT

System Action: Wait for operator response.

Operator Response: Reply U to acknowledge and then notify the System Programmer.

System Programmer Response: Review the IPL report and correct any indicated error.

OS$2P1159

MAILBOX CREATE FAILED. RC = nn, RSN = nn.

Explanation: The IXZXIXMC or IXZXIXMB macro to create a JES2 mailbox for XCF failed.

nn Return code and Reason code.

Source: OS$J2P1x

System Action: Job Routing option initialization is terminated.

Operator Response: Notify the system programmer.

System Programmer Response: Examine the return codes and reason codes provided in the message. If the cause of the problem is not apparent, call OS/EM technical support.

OS$2P2159

MAILBOX DELETE FAILED. RC = nn, RSN = nn.

Explanation: The IXZXIXMC or IXZXIXMB macro to delete a JES2 mailbox for XCF failed.

nn Return code and Reason code.

Source: OS$J2P2x

System Action: Job Routing option initialization is terminated.

Operator Response: Notify the system programmer.

System Programmer Response: Examine the return codes and reason codes provided in the message. If the cause of the problem is not apparent, call OS/EM technical support.

OS$ALC160

name FAILED IN MODULE modulename. RC = xx, RSN = yy.

Explanation: The named MVS macro did not execute correctly.

name The name of the macro that failed.

xx The return code from the macro request.

yy The reason code from the macro request.

Source: OS$ALLO1

System Action: Various. Usually the function that was being performed is terminated and some function of OS/EM will not operate correctly.

Operator Response: Notify the system programmer.

System Programmer Response: Examine the return codes and reason codes provided in the message. If the cause of the problem is not apparent, call OS/EM technical support.

OS$DMP160

name FAILED IN MODULE modulename. RC = xx, RSN = yy.

Explanation: The named MVS macro did not execute correctly.

name The name of the macro that failed.

xx The return code from the macro request.

yy The reason code from the macro request.

Source: OS$DUMP

System Action: Various. Usually the function that was being performed is terminated and some function of OS/EM will not operate correctly.

Operator Response: Notify the system programmer.

System Programmer Response: Examine the return codes and reason codes provided in the message. If the cause of the problem is not apparent, call OS/EM technical support.

OS$HSP160

name FAILED IN MODULE modulename. RC = xx, RSN = yy.

Explanation: The named MVS macro did not execute correctly.

name The name of the macro that failed.

xx The return code from the macro request.

yy The reason code from the macro request.

Source: OS$HJ20x

System Action: Various. Usually the function that was being performed is terminated and some function of OS/EM will not operate correctly.

Operator Response: Notify the system programmer.

System Programmer Response: Examine the return codes and reason codes provided in the message. If the cause of the problem is not apparent, call OS/EM technical support.

OS$REL160

name FAILED IN MODULE modulename. RC = xx, RSN = yy.

Explanation: The named MVS macro did not execute correctly.

name The name of the macro that failed.

xx The return code from the macro request.

yy The reason code from the macro request.

Source: OS$RELOD

System Action: Various. Usually the function that was being performed is terminated and some function of OS/EM will not operate correctly.

Operator Response: Notify the system programmer.

System Programmer Response: Examine the return codes and reason codes provided in the message. If the cause of the problem is not apparent, call OS/EM technical support.

OS$TPS160

name FAILED IN MODULE modulename. RC = xx, RSN = yy.

Explanation: The named MVS macro did not execute correctly.

name The name of the macro that failed.

xx The return code from the macro request.

yy The reason code from the macro request.

Source: OS$TPSHR

System Action: Various. Usually the function that was being performed is terminated and some function of OS/EM will not operate correctly.

Operator Response: Notify the system programmer.

System Programmer Response: Examine the return codes and reason codes provided in the message. If the cause of the problem is not apparent, call OS/EM technical support.

OS$W21160

name FAILED IN MODULE modulename. RC = xx, RSN = yy.

Explanation: The named MVS macro did not execute correctly.

name The name of the macro that failed.

xx The return code from the macro request.

yy The reason code from the macro request.

Source: OS$W21SD

System Action: Various. Usually the function that was being performed is terminated and some function of OS/EM will not operate correctly.

Operator Response: Notify the system programmer.

System Programmer Response: Examine the return codes and reason codes provided in the message. If the cause of the problem is not apparent, call OS/EM technical support.

OS$X32160

name FAILED IN MODULE modulename. RC = xx, RSN = yy.

Explanation: The named MVS macro did not execute correctly.

name The name of the macro that failed.

xx The return code from the macro request.

yy The reason code from the macro request.

Source: OS$J2N32,OS$J2X32

System Action: Various. Usually the function that was being performed is terminated and some function of OS/EM will not operate correctly.

Operator Response: Notify the system programmer.

System Programmer Response: Examine the return codes and reason codes provided in the message. If the cause of the problem is not apparent, call OS/EM technical support.

OS$2G2160

name FAILED IN MODULE modulename. RC = xx, RSN = yy.

Explanation: The named MVS macro did not execute correctly.

name The name of the macro that failed.

xx The return code from the macro request.

yy The reason code from the macro request.

Source: OS$J2G2x

System Action: Various. Usually the function that was being performed is terminated and some function of OS/EM will not operate correctly.

Operator Response: Notify the system programmer.

System Programmer Response: Examine the return codes and reason codes provided in the message. If the cause of the problem is not apparent, call OS/EM technical support.

OS$2G3160

name FAILED IN MODULE modulename. RC = xx, RSN = yy.

Explanation: The named MVS macro did not execute correctly.

name The name of the macro that failed.

xx The return code from the macro request.

yy The reason code from the macro request.

Source: OS$J2G3x

System Action: Various. Usually the function that was being performed is terminated and some function of OS/EM will not operate correctly.

Operator Response: Notify the system programmer.

System Programmer Response: Examine the return codes and reason codes provided in the message. If the cause of the problem is not apparent, call OS/EM technical support.

OS$2G4160

name FAILED IN MODULE modulename. RC = xx, RSN = yy.

Explanation: The named MVS macro did not execute correctly.

name The name of the macro that failed.

xx The return code from the macro request.

yy The reason code from the macro request.

Source: OS$J2G4x

System Action: Various. Usually the function that was being performed is terminated and some function of OS/EM will not operate correctly.

Operator Response: Notify the system programmer.

System Programmer Response: Examine the return codes and reason codes provided in the message. If the cause of the problem is not apparent, call OS/EM technical support.

OS$2P1160

name FAILED IN MODULE modulename. RC = xx, RSN = yy.

Explanation: The named MVS macro did not execute correctly.

name The name of the macro that failed.

xx The return code from the macro request.

yy The reason code from the macro request.

Source: OS$J2P1x

System Action: Various. Usually the function that was being performed is terminated and some function of OS/EM will not operate correctly.

Operator Response: Notify the system programmer.

System Programmer Response: Examine the return codes and reason codes provided in the message. If the cause of the problem is not apparent, call OS/EM technical support.

OS$2P3160

name FAILED IN MODULE modulename. RC = xx, RSN = yy.

Explanation: The named MVS macro did not execute correctly.

name The name of the macro that failed.

xx The return code from the macro request.

yy The reason code from the macro request.

Source: OS$J2P3x

System Action: Various. Usually the function that was being performed is terminated and some function of OS/EM will not operate correctly.

Operator Response: Notify the system programmer.

System Programmer Response: Examine the return codes and reason codes provided in the message. If the cause of the problem is not apparent, call OS/EM technical support.

OS$2S0160

name FAILED IN MODULE modulename. RC = xx, RSN = yy.

Explanation: The named MVS macro did not execute correctly.

name The name of the macro that failed.

xx The return code from the macro request.

yy The reason code from the macro request.

Source: OS$J2S0x

System Action: Various. Usually the function that was being performed is terminated and some function of OS/EM will not operate correctly.

Operator Response: Notify the system programmer.

System Programmer Response: Examine the return codes and reason codes provided in the message. If the cause of the problem is not apparent, call OS/EM technical support.

OS$IPL161

JES2 SUBSYSTEM subname NOT DEFINED.

Explanation: The named JES2 subsystem has not been defined to MVS by an IEFSSNxx parmlib member.

subname JES2 Subsystem name

Source: OS$IPL

System Action: OS/EM will be unable to process JES2 exits for the subsystem.

Operator Response: Notify the system programmer.

System Programmer Response: Check the spelling with the subsystem name. If it is correct and you wish to have OS/EM process exits for the subsystem, then add the subsystem name to an IEFSSNxx member in parmlib and re-IPL the system.

OS$IPL163

osvx SUBSYSTEM NOT DEFINED TO MVS

Explanation: The OS/EM subsystem is not defined to MVS in an active IEFSSNxx member of SYS1.PARMLIB.

osvx: The OS/EM subsystem name.

Source: OS$IPL

System Action: OS$IPL terminates.

Operator Response: Notify the System Programmer.

System Programmer Response: Correct the IEFSSNxx member of SYS1.PARMLIB and re-IPL.

OS$IPL165

WRONG SUBSYSTEM NAME - OS$IPL TERMINATING

Explanation: During OS/EM sub-system initialization, the sub-system name that was entered in the IEFSSNxx member was not OSV5.

Source: OS$IPL

System Action: Sub-system initialization terminates.

Operator Response: Contact the System Programmer.

System Programmer Response: Correct the IEFSSNxx member and re-ipl the system.

OS$J3E166

JES3 EXIT nn INVALID R15 VALUE vv FROM module

Explanation: OS/EM detected an invalid R15 value for exit nn.

nn: The JES3 exit name.

vv: The value contained in the return code (R15).

module: The name of the load module.

Source: OS$J3ECN

System Action: The value is ignored.

Operator Response: Contact the System Programmer.

System Programmer Response: Correct the user exit to ensure that it returns valid return codes.

OS$ALC167

dsname FILE function ERROR, DECB CODE = nn

Explanation: An I/O error has occurred on the named file. A code other than a x'7F' was posted back into the DECB upon completion of a BSAM file I/O operation.

dsname: The name of the dataset.

function: The I/O function being performed.

nn: The DECB code.

Source: OS$ALLO1

System Action: Initialization of the OS/EM function is terminated.

Operator Response: Notify the system programmer.

System Programmer Response: Verify that the hardware is functioning correctly. Examine the DECB code and any error messages which may have been issued at the time of the error to determine the cause of the error. It may also be necessary to examine the dataset and catalog entry. If there is no apparent reason for an I/O error, contact OS/EM technical support.

OS$JS2167

dsname FILE function ERROR, DECB CODE = nn

Explanation: An I/O error has occurred on the named file. A code other than a x'7F' was posted back into the DECB upon completion of a BSAM file I/O operation.

dsname: The name of the dataset.

function: The I/O function being performed.

nn: The DECB code.

Source: OS$JES2G

System Action: Initialization of the OS/EM function is terminated.

Operator Response: Notify the system programmer.

OS$TPS167

dsname FILE function ERROR, DECB CODE = nn

Explanation: An I/O error has occurred on the named file. A code other than a x'7F' was posted back into the DECB upon completion of a BSAM file I/O operation.

dsname: The name of the dataset.

function: The I/O function being performed.

nn: The DECB code.

Source: OS$TPSHR

System Action: Initialization of the OS/EM function is terminated.

Operator Response: Notify the system programmer.

OS$2S0167

dsname FILE function ERROR, DECB CODE = nn

Explanation: An I/O error has occurred on the named file. A code other than a x'7F' was posted back into the DECB upon completion of a BSAM file I/O operation.

dsname: The name of the dataset.

function: The I/O function being performed.

nn: The DECB code.

Source: OS$J2S0x

System Action: Initialization of the OS/EM function is terminated.

Operator Response: Notify the system programmer.

OS$JS2168

dsname DATASET IS TOO SMALL

Explanation: The resource dataset is not large enough.

dsname: The name of the dataset.

Source: OS$JES2G

System Action: The initialization of the OS/EM function is terminated.

Operator Response: Notify the system programmer.

System Programmer Response: Check the OS/EM installation instructions and increase the size of the dataset to the size indicated. Then reactivate the OS/EM function.

OS$X00169

NO SPACE AVAILABLE IN HCT PATCH AREA FOR OS/EM USE

Explanation: During JES2 initialization, OS/EM requires 3 words (12 bytes) in the HASP Control Table (HCT) patch area. However, local modifications have exhausted the HCT patch area.

Source: OS$J2X00

System Action: JES2 initialization fails.

Operator Response: Notify the system programmer.

System Programmer Response: Check all local JES2 modifications and make necessary changes to ensure that three (not necessarily contiguous) words are available in the HCT patch area for OS/EM initialization.

OS$HSP170

OS/EM OPTION NOT SUPPORTED FOR JES2 RELEASE rel

Explanation: While initializing a JES2 function, OS/EM has determined that the current JES2 release is not supported.

rel: The JES2 release that is currently active.

Source: OS$HJ20x

System Action: The OS/EM JES2 function initialization fails.

Operator Response: Notify the system programmer.

System Programmer Response: Disable the OS/EM JES2 functions until JES2 is upgraded to a supported release.

OS$JS2170

OS/EM OPTION NOT SUPPORTED FOR JES2 RELEASE rel

Explanation: While initializing a JES2 function, OS/EM has determined that the current JES2 release is not supported.

rel: The JES2 release that is currently active.

Source: OS$JES2A through OS$JES2H

System Action: The OS/EM JES2 function initialization fails.

Operator Response: Notify the system programmer.

System Programmer Response: Disable the OS/EM JES2 functions until JES2 is upgraded to a supported release.

OS$REL170

OS/EM OPTION NOT SUPPORTED FOR JES2 RELEASE rel

Explanation: While initializing a JES2 function, OS/EM has determined that the current JES2 release is not supported.

rel: The JES2 release that is currently active.

Source: OS$RELOD

System Action: The OS/EM JES2 function initialization fails.

Operator Response: Notify the system programmer.

System Programmer Response: Disable the OS/EM JES2 functions until JES2 is upgraded to a supported release.

OS$LOD171

OFFSET ADJUSTMENT FAILED FOR subsys MODULE modname.

Explanation: The adjustment of the JES2 offsets in the named module failed.

subsys: The name of the JES2 subsystem.

modname: The load module name.

Source: OS$LOAD

System Action: The module is deleted.

Operator Response: Notify the system programmer.

System Programmer Response: Check that the load module is for the correct JES2 and OS/EM. Check that the module has not been corrupted. If necessary, call OS/EM technical support.

OS$REL171

OFFSET ADJUSTMENT FAILED FOR subsys MODULE modname.

Explanation: The adjustment of the JES2 offsets in the named module failed.

subsys: The name of the JES2 subsystem.

modname: The load module name.

Source: OS$RELOD

System Action: The module is deleted.

Operator Response: Notify the system programmer.

System Programmer Response: Check that the load module is for the correct JES2 and OS/EM. Check that the module has not been corrupted. If necessary, call OS/EM technical support.

OS$TPS172

JOB xxx IS WAITING FOR A SHARED TAPE DEVICE

Explanation: The named job requires a tape device but no device is currently available. The system may have issued an IEF238D message if no suitable device is currently attached to this system or may be waiting with no message if a device that can satisfy the allocation is on this system but is currently in use by another job. If a WTOR has been issued, tape share will respond to the message as soon as a device can be acquired from another system.

xxx: Job name

Source: OS$TPSHR

System Action: Waits for device.

Operator Response: None. Informational message only.

System Programmer Response: None.

OS$ALC173

TAPESHR IS ACTIVE. CANNOT CHANGE DATASET NAME

Explanation: The OS$CNTL command was issued to activate TAPESHR and a new communication dataset name was specified. TAPESHR is already active and using a different communication dataset name so the name cannot be changed. The currently active dataset name will continue to be used.

Source: OS$ALLO1

System Action: No action taken. TAPESHR continues with the currently active communication dataset.

Operator Response: None.

System Programmer Response: None.

OS$ALC174

TAPESHR DSN IS REQUIRED

Explanation: The OS$CNTL command was issued to activate TAPESHR and a name for the communication dataset was not given. The communication dataset is required and a name must be specified.

Source: OS$ALLO1

System Action: TAPESHR is not started.

Operator Response: Reissue the OS$CNTL command specifying the name of the previously allocated dataset to be used.

System Programmer Response: None.

OS$ALC175

DEVICE xx(x) CANNOT BE action TAPESHR. REASON rr

Explanation: An OS$CNTL command was issued to request that TAPESHR either add the device(s) to its control, delete the device(s) from its control, or vary the device online or offline, globally or locally. TAPESHR is unable to complete the request for the reason indicated by the reason code:

4 = The device cannot be added because it is already controlled.

8 = The device cannot be added because it is not a valid tape device present on this system, or cannot be varied because it is not controlled by TAPESHR.

xx(x): Device address.

action: Either ADDED TO, DELETED FROM, or VARIED BY.

Source: OS$ALLO1

System Action: The OS$CNTL does not complete.

Operator Response: Reissue the command specifying a valid device number.

System Programmer Response: None.

OS$TPS176

TAPESHR UNABLE TO START. ALREADY 32 ACTIVE SYSTEMS.

Explanation: There are already 32 systems participating in the TAPESHR complex. That is the maximum number of systems that can be active concurrently.

Source: OS$TPSHR

System Action: TAPESHR does not start.

Operator Response: Do not attempt to start TAPESHR on more than 32 systems.

System Programmer Response: None.

OS$TPS177

TAPESHR SHUTDOWN WAITING FOR DEVICES TO GO OFFLINE

*WARNING* DEV xxx(xxx) IS ONLINE TO MULTIPLE SYSTEMS

Explanation: OS$TPSHR has found that the named device is online to more than one system. A VARY OFFLINE command has been issued to attempt to correct this problem. This condition should never be created by TAPESHR, though it may be detected by TAPESHR at startup time.

xxx: Device address.

System Action: The device is varied offline.

Source: OS$TPSHR

Operator Response: Vary the device offline on other systems and verify that the device is not allocated by more than one job. If it is allocated by more than one job, any tape on the drive may be corrupted and the persons responsible for the jobs should be notified of that possibility.

System Programmer Response: If this message occured at other than startup time, it may indicate a problem with TAPESHR. Determine the circumstances under which it was issued, including any operator commands and messages regarding the tape device, and call Trident Services for support.

OS$ALC183

DEVICE xxx(xxx) IN/PENDING LOCAL/GLOBAL ON/OFFLINE MODE

Explanation: This message is issued in response to an OS$CNTL command or an operator command to change the TAPESHR status of a device.

xxx: Device address.

Source: OS$ALLO1

System Action: None. Informational message only.

Operator Response: None.

System Programmer Response: None.

OS$TPS183

DEVICE xxx(xxx) IN/PENDING LOCAL/GLOBAL ON/OFFLINE MODE

Explanation: This message is issued in response to an OS$CNTL command or an operator command to change the TAPESHR status of a device.

xxx: Device address.

Source: OS$TPSHR

System Action: None. Informational message only.

Operator Response: None.

System Programmer Response: None.

OS$TPS184

CONFIRM RESET OF SYSTEM xxxx. REPLY "Y" TO CONFIRM, "N" TO DENY

Explanation: OS$TPSHR has determined, by noting that the timestamps in the communication file have not changed recently, that the named system may have stopped running. This may be caused by a system reset, a loop, a failure of OS$TPSHR on that system, or a reserve lockout. It is asking the operator to verify that the system is really shutdown and that the tapes that were attached to that system may be returned to the available device pool.

xxxx: System ID.

Source: OS$TPSHR

System Action: Waits for reply from operator.

Operator Response: If the system is really shut down, reply "Y" and the tapes that were owned by that system will be released. If OS$TPSHR has accidently terminated on that system, issue the command:

S OS$TPSHR.OS$TPSHR,SUB=MSTR

to restart it. If there is some other unusual reason that the system is temporarily not active but will resume shortly, reply "N" to allow the system to retain possession of the tape resources that it owns. In any other case notify the system programmer.

System Programmer Response: Determine why OS$TPSHR is not running on the named system and either reply to the message or restart OS$TPSHR.

OS$CMD185

DEVICE xxx IS NOT CONTROLLED BY TAPESHR - IGNORED

Explanation: The operator has issued a vary command to change the TAPESHR status of a device, but that device is not controlled by TAPESHR.

xxx: Device address.

Source: OS$CMD

System Action: The command is ignored.

Operator Response: If the device should be controlled by TAPESHR, issue a command to add it to TAPESHR's control. Otherwise the device is ignored and no action is required.

System Programmer Response: None.

OS$TPS186

INVALID MODIFY COMMAND

Explanation:The operator issued a modify command to TAPESHR that was syntactically incorrect.

Source: OS$TPSHR

System Action: The command is ignored.

Operator Response: Reissue the modify command with the correct syntax.

System Programmer Response: None.

OS$TPS187

OS$TPSHR INITIALIZATION COMPLETE

Explanation: OS$TPSHR has completed initialization and is now processing normally.

Source: OS$TPSHR

Operator Response: None.

System Programmer Response: None.

OS$CMD188

DEVICE xxx(xxx) IS UNAVAILABLE

Explanation: The operator has issued a vary online command for the named device. The device is not currently available, either because it is marked as offline (locally or globally), or because it is currently owned by another system.

xxx: Device address.

Source: OS$CMD

System Action: The command is ignored.

Operator Response: Issue a display command for the device to determine why it is not available. If the device must be brought online on this system, vary it offline on the owning system, vary it online globally, or vary it online locally as indicated by the display command. Then reissue the vary online command.

System Programmer Response: None.

OS$CMD189

UNABLE TO DETERMINE DEVICE STATUS

Explanation: The operator has issued a vary online command for the named device and the command processing routine is unable to communicate with OS$TPSHR to determine the current status of the device.

Source: OS$CMD

System Action: The command is ignored.

Operator Response: Verify that OS$TPSHR is active. If not, start it by issuing a start command:

S OS$TPSHR.OS$TPSHR,SUB=MSTR

If it is active, notify the system programmer.

System Programmer Response: Attempt to determine why OS$TPSHR is not responding to requests. If able, dump the OS$TPSHR address space, restart OS$TPSHR, and call Trident Services for support.

OS$ALC190

START OF OS$TPSHR FAILED. CHECK SYSLOG.

Explanation: OS$CNTL has issued a start command for OS$TPSHR, but OS$TPSHR has failed to initialize.

Source: OS$ALLO1

Operator Response: Notify the system programmer.

System Programmer Response: Check the syslog to verify that the start command was issued successfully. Check for JCL errors. When the cause of the error has been determined, reissue the failing start command.

OS$IPL191

DYNAMIC CONCATENTION FAILED. RC = nn

Explanation: OS/EM was unable to concatenate the libraries specified for the Dynamic Steplib facility.

nn: The return code from the dynamic allocation request.

Source: OS$IPL

System Action: The job will either continue without the specified library, or will be failed based on the Steplib Controls.

Operator Response: Notify the system programmer.

System Programmer Response: Verify that the library is available and that the job has RACF authority to read the dataset.

OS$W21191

DYNAMIC CONCATENTION FAILED. RC = nn

Explanation: OS/EM was unable to concatenate the libraries specified for the Dynamic Steplib facility.

NO LONGER ABLE TO CHANGE JES2 VERSION

Explanation: Attempted to change the version number of a JES2 subsystem after it has become active.

Source: OS$JES2

Source: OS$JES2A through OS$JES2H

Operator Response: Notify the System Programmer.

System Programmer Response: After an alternate JES2 subsystem has become active you may no longer change the version number of exits that OS/EM will load. If the incorrect version was specified, the JES2 subsystem must be stopped before the version can be changed.

OS$REL197

NO LONGER ABLE TO CHANGE JES2 VERSION

Explanation: Attempted to change the version number of a JES2 subsystem after it has become active.

Source: OS$RELOD

Operator Response: Notify the System Programmer.

OS$LOD198

subsys OFFSET TABLE NOT AVAILABLE

Explanation: The JES subsystem could not locate the appropriate JES2 Offset Table (OS$J2OFx).

subsys: The JES2 subsystem name.

Source: OS$LOAD

System Action: Load of JES2 module fails.

Operator Response: None.

System Programmer Response: Assemble the JES2 Offset Table using the SYS1.MACLIB and SYS1.HASPSRC datasets that are appropriate for that JES2 subsystem. Refer to the OS/EM Installation Guide and OS/EM User Guide for more information.

NO subsys VERSION AVAILABLE; UNABLE TO LOAD MODULE modname

Explanation: OS/EM could not locate a version of the OS/EM module that coincides with the release level of the named JES2 subsystem.

subsys: The name of the JES2 subsystem.

modname: The name of the OS/EM module.

Source: OS$RELOD

System Action: The load of the module fails and the associated OS/EM JES2 function is disabled.

Operator Response: None.

System Programmer Response: OS/EM JES2 modules have a one-byte suffix and, when a module is to be loaded, the system determines the suffix based on the release level of the JES2 system (e.g. OS$J2D0G & OS$J2D0H are the OS/EM OS$J2D0 modules for different JES2 releases). When this message is issued, OS/EM could not locate the OS/EM module for that JES2 system could not be found.

Check the LINKLST to ensure that the current OS/EM load library is included in the search list. If it is present, contact OS/EM support (note your JES2 release level).

OS$ACN206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$ALCCN

Operator Response: Contact System Programmer.

OS$ALC206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$ALLO0,OS$ALLO1

Operator Response: Contact System Programmer.

OS$ASY206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$ASYNC

Operator Response: Contact System Programmer.

OS$CMD206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$CMD

Operator Response: Contact System Programmer.

OS$COM206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$COMM

Operator Response: Contact System Programmer.

OS$DCN206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$DADCN

Operator Response: Contact System Programmer.

OS$DC1206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$DCB1

Operator Response: Contact System Programmer.

OS$EXR206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$EXRTN

Operator Response: Contact System Programmer.

OS$FRA206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$FRACN

Operator Response: Contact System Programmer.

OS$FTN206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$FRRTN

Operator Response: Contact System Programmer.

OS$HCN206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$HSMCN

Operator Response: Contact System Programmer.

OS$HSP206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$HJ20x

Operator Response: Contact System Programmer.

OS$IAT206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$INTK

Operator Response: Contact System Programmer.

OS$ICN206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$ISPCN

Operator Response: Contact System Programmer.

OS$IPL206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$IPL

Operator Response: Contact System Programmer.

OS$JS2206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$JES2B,OS$JES2G

Operator Response: Contact System Programmer.

OS$J2M206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J2MCx

Operator Response: Contact System Programmer.

OS$J2R206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J2ERx

Operator Response: Contact System Programmer.

OS$J2S206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J2SCx

Operator Response: Contact System Programmer.

OS$J3E206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J3ECN

Operator Response: Contact System Programmer.

OS$J3S206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J3SVC

Operator Response: Contact System Programmer.

OS$LOK206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$LOCK

Operator Response: Contact System Programmer.

OS$RCN206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$RACCN

Operator Response: Contact System Programmer.

OS$SCN206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$SAFCN,OS$SMFCN

Operator Response: Contact System Programmer.

OS$TCN206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$TSOCN

Operator Response: Contact System Programmer.

OS$TPS206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$TPSHR

Operator Response: Contact System Programmer.

OS$UJI206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$UJI

Operator Response: Contact System Programmer.

OS$USI206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$USI

Operator Response: Contact System Programmer.

OS$VCN206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$SVCCN

Operator Response: Contact System Programmer.

OS$X05206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J2X05

Operator Response: Contact System Programmer.

OS$02F206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$0002F

Operator Response: Contact System Programmer.

OS$1PL206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$IPL1

Operator Response: Contact System Programmer.

OS$2H5206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J2H5x

Operator Response: Contact System Programmer.

OS$2P4206

ABEND AREGS 0-3: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J2P4x

Operator Response: Contact System Programmer.

OS$ACN207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$ALCCN

Operator Response: Contact System Programmer.

OS$ALC207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$ALLO0,OS$ALLO1

Operator Response: Contact System Programmer.

OS$ASY207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$ASYNC

Operator Response: Contact System Programmer.

OS$CMD207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$CMD

Operator Response: Contact System Programmer.

OS$COM207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$COMM

Operator Response: Contact System Programmer.

OS$DCN207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$DADCN

Operator Response: Contact System Programmer.

OS$DC1207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$DCB1

Operator Response: Contact System Programmer.

OS$EXR207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$EXRTN

Operator Response: Contact System Programmer.

OS$FRA207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$FRACN

Operator Response: Contact System Programmer.

OS$FTN207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$FRRTN

Operator Response: Contact System Programmer.

OS$HCN207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$HSMCN

Operator Response: Contact System Programmer.

OS$HSP207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$HJ20x

Operator Response: Contact System Programmer.

OS$IAT207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$INTK

Operator Response: Contact System Programmer.

OS$ICN207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$ISPCN

Operator Response: Contact System Programmer.

OS$IPL207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$IPL

Operator Response: Contact System Programmer.

OS$JS2207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$JES2B,OS$JES2G

Operator Response: Contact System Programmer.

OS$J2M207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J2MCx

Operator Response: Contact System Programmer.

OS$J2R207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J2ERx

Operator Response: Contact System Programmer.

OS$J2S207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J2SCx

Operator Response: Contact System Programmer.

OS$J3E207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J3ECN

Operator Response: Contact System Programmer.

OS$J3S207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J3SVC

Operator Response: Contact System Programmer.

OS$LOK207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$LOCK

Operator Response: Contact System Programmer.

OS$RCN207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$RACCN

Operator Response: Contact System Programmer.

OS$SCN207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$SAFCN,OS$SMFCN

Operator Response: Contact System Programmer.

OS$TCN207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$TSOCN

Operator Response: Contact System Programmer.

OS$TPS207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$TPSHR

Operator Response: Contact System Programmer.

OS$UJI207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$UJI

Operator Response: Contact System Programmer.

OS$USI207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$USI

Operator Response: Contact System Programmer.

OS$VCN207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$SVCCN

Operator Response: Contact System Programmer.

OS$X05207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J2X05

Operator Response: Contact System Programmer.

OS$02F207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$0002F

Operator Response: Contact System Programmer.

OS$1PL207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$IPL1

Operator Response: Contact System Programmer.

OS$2H5207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J2H5x

Operator Response: Contact System Programmer.

OS$2P4207

ABEND AREGS 4-7: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J2P4x

Operator Response: Contact System Programmer.

OS$ACN208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$ALCCN

Operator Response: Contact System Programmer.

OS$ALC208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$ALLO0,OS$ALLO1

Operator Response: Contact System Programmer.

OS$ASY208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$ASYNC

Operator Response: Contact System Programmer.

OS$CMD208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$CMD

Operator Response: Contact System Programmer.

OS$COM208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$COMM

Operator Response: Contact System Programmer.

OS$DCN208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$DADCN

Operator Response: Contact System Programmer.

OS$DC1208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$DCB1

Operator Response: Contact System Programmer.

OS$EXR208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$EXRTN

Operator Response: Contact System Programmer.

OS$FRA208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$FRACN

Operator Response: Contact System Programmer.

OS$FTN208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$FRRTN

Operator Response: Contact System Programmer.

OS$HCN208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$HSMCN

Operator Response: Contact System Programmer.

OS$HSP208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$HJ20x

Operator Response: Contact System Programmer.

OS$IAT208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$INTK

Operator Response: Contact System Programmer.

OS$ICN208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$ISPCN

Operator Response: Contact System Programmer.

OS$IPL208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$IPL

Operator Response: Contact System Programmer.

OS$JS2208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$JES2B,OS$JES2G

Operator Response: Contact System Programmer.

OS$J2M208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J2MCx

Operator Response: Contact System Programmer.

OS$J2R208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J2ERx

Operator Response: Contact System Programmer.

OS$J2S208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J2SCx

Operator Response: Contact System Programmer.

OS$J3E208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J3ECN

Operator Response: Contact System Programmer.

OS$J3S208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J3SVC

Operator Response: Contact System Programmer.

OS$LOK208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$LOCK

Operator Response: Contact System Programmer.

OS$RCN208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$RACCN

Operator Response: Contact System Programmer.

OS$SCN208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$SAFCN,OS$SMFCN

Operator Response: Contact System Programmer.

OS$TCN208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$TSOCN

Operator Response: Contact System Programmer.

OS$TPS208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$TPSHR

Operator Response: Contact System Programmer.

OS$UJI208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$UJI

Operator Response: Contact System Programmer.

OS$USI208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$USI

Operator Response: Contact System Programmer.

OS$VCN208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$SVCCN

Operator Response: Contact System Programmer.

OS$X05208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J2X05

Operator Response: Contact System Programmer.

OS$02F208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$0002F

Operator Response: Contact System Programmer.

OS$1PL208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$IPL1

Operator Response: Contact System Programmer.

OS$2H5208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J2H5x

Operator Response: Contact System Programmer.

OS$2P4208

ABEND AREGS 8-11: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J2P4x

Operator Response: Contact System Programmer.

OS$ACN209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$ALCCN

Operator Response: Contact System Programmer.

OS$ALC209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$ALLO0,OS$ALLO1

Operator Response: Contact System Programmer.

OS$ASY209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$ASYNC

Operator Response: Contact System Programmer.

OS$CMD209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$CMD

Operator Response: Contact System Programmer.

OS$COM209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$COMM

Operator Response: Contact System Programmer.

OS$DCN209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$DADCN

Operator Response: Contact System Programmer.

OS$DC1209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$DCB1

Operator Response: Contact System Programmer.

OS$EXR209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$EXRTN

Operator Response: Contact System Programmer.

OS$FRA209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$FRACN

Operator Response: Contact System Programmer.

OS$FTN209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$FRRTN

Operator Response: Contact System Programmer.

OS$HCN209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$HSMCN

Operator Response: Contact System Programmer.

OS$HSP209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$HJ20x

Operator Response: Contact System Programmer.

OS$IAT209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$INTK

Operator Response: Contact System Programmer.

OS$ICN209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$ISPCN

Operator Response: Contact System Programmer.

OS$IPL209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$IPL

Operator Response: Contact System Programmer.

OS$JS2209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$JES2B,OS$JES2G

Operator Response: Contact System Programmer.

OS$J2M209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J2MCx

Operator Response: Contact System Programmer.

OS$J2R209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J2ERx

Operator Response: Contact System Programmer.

OS$J2S209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J2SCx

Operator Response: Contact System Programmer.

OS$J3E209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J3ECN

Operator Response: Contact System Programmer.

OS$J3S209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J3SVC

Operator Response: Contact System Programmer.

OS$LOK209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$LOCK

Operator Response: Contact System Programmer.

OS$RCN209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$RACCN

Operator Response: Contact System Programmer.

OS$SCN209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$SAFCN,OS$SMFCN

Operator Response: Contact System Programmer.

OS$TCN209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$TSOCN

Operator Response: Contact System Programmer.

OS$TPS209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$TPSHR

Operator Response: Contact System Programmer.

OS$UJI209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$UJI

Operator Response: Contact System Programmer.

OS$USI209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$USI

Operator Response: Contact System Programmer.

OS$VCN209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$SVCCN

Operator Response: Contact System Programmer.

OS$X05209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J2X05

Operator Response: Contact System Programmer.

OS$02F209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$0002F

Operator Response: Contact System Programmer.

OS$1PL209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$IPL1

Operator Response: Contact System Programmer.

OS$2H5209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J2H5x

Operator Response: Contact System Programmer.

OS$2P4209

ABEND AREGS 12-15: nnnnnnnn nnnnnnnn nnnnnnnn nnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit.

nnnnnnnn: Contents of the Access Register.

Source: OS$J2P4x

Operator Response: Contact System Programmer.

OS$ACN210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ALCCN

Operator Response: Contact System Programmer.

OS$ALC210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ALLO0,OS$ALLO1

Operator Response: Contact System Programmer.

OS$ASY210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ASYNC

Operator Response: Contact System Programmer.

OS$CMD210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$CMD

Operator Response: Contact System Programmer.

OS$COM210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$COMM

Operator Response: Contact System Programmer.

OS$DCN210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$DADCN

Operator Response: Contact System Programmer.

OS$DC1210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$DCB1

Operator Response: Contact System Programmer.

OS$EXR210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$EXRTN

Operator Response: Contact System Programmer.

OS$FRA210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$FRACN

Operator Response: Contact System Programmer.

OS$FTN210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$FRRTN

Operator Response: Contact System Programmer.

OS$HCN210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$HSMCN

Operator Response: Contact System Programmer.

OS$HSP210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$HJ20x

Operator Response: Contact System Programmer.

OS$IAT210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$INTK

Operator Response: Contact System Programmer.

OS$ICN210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ISPCN

Operator Response: Contact System Programmer.

OS$IPL210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$IPL

Operator Response: Contact System Programmer.

OS$JS2210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$JES2B,OS$JES2G

Operator Response: Contact System Programmer.

OS$J2M210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2MCx

Operator Response: Contact System Programmer.

OS$J2R210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2ERx

Operator Response: Contact System Programmer.

OS$J2S210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2SCx

Operator Response: Contact System Programmer.

OS$J3E210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J3ECN

Operator Response: Contact System Programmer.

OS$J3S210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J3SVC

Operator Response: Contact System Programmer.

OS$LOK210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$LOCK

Operator Response: Contact System Programmer.

OS$RCN210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$RACCN

Operator Response: Contact System Programmer.

OS$SCN210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$SAFCN,OS$SMFCN

Operator Response: Contact System Programmer.

OS$TCN210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$TSOCN

Operator Response: Contact System Programmer.

OS$TPS210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$TPSHR

Operator Response: Contact System Programmer.

OS$UJI210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$UJI

Operator Response: Contact System Programmer.

OS$USI210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$USI

Operator Response: Contact System Programmer.

OS$VCN210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$SVCCN

Operator Response: Contact System Programmer.

OS$X05210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2X05

Operator Response: Contact System Programmer.

OS$02F210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$0002F

Operator Response: Contact System Programmer.

OS$1PL210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$IPL1

Operator Response: Contact System Programmer.

OS$2H5210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2H5x

Operator Response: Contact System Programmer.

OS$2P4210

ABEND AREGS 0-1: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2P4x

Operator Response: Contact System Programmer.

OS$ACN211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ALCCN

Operator Response: Contact System Programmer.

OS$ALC211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ALLO0,OS$ALLO1

Operator Response: Contact System Programmer.

OS$ASY211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ASYNC

Operator Response: Contact System Programmer.

OS$CMD211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$CMD

Operator Response: Contact System Programmer.

OS$COM211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$COMM

Operator Response: Contact System Programmer.

OS$DCN211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$DADCN

Operator Response: Contact System Programmer.

OS$DC1211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$DCB1

Operator Response: Contact System Programmer.

OS$EXR211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$EXRTN

Operator Response: Contact System Programmer.

OS$FRA211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$FRACN

Operator Response: Contact System Programmer.

OS$FTN211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$FRRTN

Operator Response: Contact System Programmer.

OS$HCN211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$HSMCN

Operator Response: Contact System Programmer.

OS$HSP211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$HJ20x

Operator Response: Contact System Programmer.

OS$IAT211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$INTK

Operator Response: Contact System Programmer.

OS$ICN211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ISPCN

Operator Response: Contact System Programmer.

OS$IPL211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$IPL

Operator Response: Contact System Programmer.

OS$JS2211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$JES2B,OS$JES2G

Operator Response: Contact System Programmer.

OS$J2M211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2MCx

Operator Response: Contact System Programmer.

OS$J2R211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2ERx

Operator Response: Contact System Programmer.

OS$J2S211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2SCx

Operator Response: Contact System Programmer.

OS$J3E211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J3ECN

Operator Response: Contact System Programmer.

OS$J3S211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J3SVC

Operator Response: Contact System Programmer.

OS$LOK211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$LOCK

Operator Response: Contact System Programmer.

OS$RCN211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$RACCN

Operator Response: Contact System Programmer.

OS$SCN211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$SAFCN,OS$SMFCN

Operator Response: Contact System Programmer.

OS$TCN211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$TSOCN

Operator Response: Contact System Programmer.

OS$TPS211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$TPSHR

Operator Response: Contact System Programmer.

OS$UJI211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$UJI

Operator Response: Contact System Programmer.

OS$USI211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$USI

Operator Response: Contact System Programmer.

OS$VCN211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$SVCCN

Operator Response: Contact System Programmer.

OS$X05211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2X05

Operator Response: Contact System Programmer.

OS$02F211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$0002F

Operator Response: Contact System Programmer.

OS$1PL211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$IPL1

Operator Response: Contact System Programmer.

OS$2H5211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2H5x

Operator Response: Contact System Programmer.

OS$2P4211

ABEND AREGS 2-3: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2P4x

Operator Response: Contact System Programmer.

OS$ACN212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ALCCN

Operator Response: Contact System Programmer.

OS$ALC212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ALLO0,OS$ALLO1

Operator Response: Contact System Programmer.

OS$ASY212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ASYNC

Operator Response: Contact System Programmer.

OS$CMD212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$CMD

Operator Response: Contact System Programmer.

OS$COM212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$COMM

Operator Response: Contact System Programmer.

OS$DCN212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$DADCN

Operator Response: Contact System Programmer.

OS$DC1212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$DCB1

Operator Response: Contact System Programmer.

OS$EXR212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$EXRTN

Operator Response: Contact System Programmer.

OS$FRA212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$FRACN

Operator Response: Contact System Programmer.

OS$FTN212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$FRRTN

Operator Response: Contact System Programmer.

OS$HCN212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$HSMCN

Operator Response: Contact System Programmer.

OS$HSP212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$HJ20x

Operator Response: Contact System Programmer.

OS$IAT212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$INTK

Operator Response: Contact System Programmer.

OS$ICN212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ISPCN

Operator Response: Contact System Programmer.

OS$IPL212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$IPL

Operator Response: Contact System Programmer.

OS$JS2212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$JES2B,OS$JES2G

Operator Response: Contact System Programmer.

OS$J2M212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2MCx

Operator Response: Contact System Programmer.

OS$J2R212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2ERx

Operator Response: Contact System Programmer.

OS$J2S212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2SCx

Operator Response: Contact System Programmer.

OS$J3E212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J3ECN

Operator Response: Contact System Programmer.

OS$J3S212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J3SVC

Operator Response: Contact System Programmer.

OS$LOK212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$LOCK

Operator Response: Contact System Programmer.

OS$RCN212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$RACCN

Operator Response: Contact System Programmer.

OS$SCN212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$SAFCN,OS$SMFCN

Operator Response: Contact System Programmer.

OS$TCN212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$TSOCN

Operator Response: Contact System Programmer.

OS$TPS212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$TPSHR

Operator Response: Contact System Programmer.

OS$UJI212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$UJI

Operator Response: Contact System Programmer.

OS$USI212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$USI

Operator Response: Contact System Programmer.

OS$VCN212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$SVCCN

Operator Response: Contact System Programmer.

OS$X05212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2X05

Operator Response: Contact System Programmer.

OS$02F212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$0002F

Operator Response: Contact System Programmer.

OS$1PL212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$IPL1

Operator Response: Contact System Programmer.

OS$2H5212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2H5x

Operator Response: Contact System Programmer.

OS$2P4212

ABEND AREGS 4-5: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2P4x

Operator Response: Contact System Programmer.

OS$ACN213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ALCCN

Operator Response: Contact System Programmer.

OS$ALC213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ALLO0,OS$ALLO1

Operator Response: Contact System Programmer.

OS$ASY213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ASYNC

Operator Response: Contact System Programmer.

OS$CMD213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$CMD

Operator Response: Contact System Programmer.

OS$COM213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$COMM

Operator Response: Contact System Programmer.

OS$DCN213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$DADCN

Operator Response: Contact System Programmer.

OS$DC1213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$DCB1

Operator Response: Contact System Programmer.

OS$EXR213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$EXRTN

Operator Response: Contact System Programmer.

OS$FRA213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$FRACN

Operator Response: Contact System Programmer.

OS$FTN213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$FRRTN

Operator Response: Contact System Programmer.

OS$HCN213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$HSMCN

Operator Response: Contact System Programmer.

OS$HSP213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$HJ20x

Operator Response: Contact System Programmer.

OS$IAT213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$INTK

Operator Response: Contact System Programmer.

OS$ICN213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ISPCN

Operator Response: Contact System Programmer.

OS$IPL213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$IPL

Operator Response: Contact System Programmer.

OS$JS2213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$JES2B,OS$JES2G

Operator Response: Contact System Programmer.

OS$J2M213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2MCx

Operator Response: Contact System Programmer.

OS$J2R213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2ERx

Operator Response: Contact System Programmer.

OS$J2S213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2SCx

Operator Response: Contact System Programmer.

OS$J3E213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J3ECN

Operator Response: Contact System Programmer.

OS$J3S213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J3SVC

Operator Response: Contact System Programmer.

OS$LOK213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$LOCK

Operator Response: Contact System Programmer.

OS$RCN213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$RACCN

Operator Response: Contact System Programmer.

OS$SCN213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$SAFCN,OS$SMFCN

Operator Response: Contact System Programmer.

OS$TCN213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$TSOCN

Operator Response: Contact System Programmer.

OS$TPS213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$TPSHR

Operator Response: Contact System Programmer.

OS$UJI213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$UJI

Operator Response: Contact System Programmer.

OS$USI213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$USI

Operator Response: Contact System Programmer.

OS$VCN213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$SVCCN

Operator Response: Contact System Programmer.

OS$X05213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2X05

Operator Response: Contact System Programmer.

OS$02F213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$0002F

Operator Response: Contact System Programmer.

OS$1PL213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$IPL1

Operator Response: Contact System Programmer.

OS$2H5213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2H5x

Operator Response: Contact System Programmer.

OS$2P4213

ABEND AREGS 6-7: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2P4x

Operator Response: Contact System Programmer.

OS$ACN214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ALCCN

Operator Response: Contact System Programmer.

OS$ALC214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ALLO0,OS$ALLO1

Operator Response: Contact System Programmer.

OS$ASY214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ASYNC

Operator Response: Contact System Programmer.

OS$CMD214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$CMD

Operator Response: Contact System Programmer.

OS$COM214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$COMM

Operator Response: Contact System Programmer.

OS$DCN214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$DADCN

Operator Response: Contact System Programmer.

OS$DC1214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$DCB1

Operator Response: Contact System Programmer.

OS$EXR214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$EXRTN

Operator Response: Contact System Programmer.

OS$FRA214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$FRACN

Operator Response: Contact System Programmer.

OS$FTN214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$FRRTN

Operator Response: Contact System Programmer.

OS$HCN214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$HSMCN

Operator Response: Contact System Programmer.

OS$HSP214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$HJ20x

Operator Response: Contact System Programmer.

OS$IAT214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$INTK

Operator Response: Contact System Programmer.

OS$ICN214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ISPCN

Operator Response: Contact System Programmer.

OS$IPL214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$IPL

Operator Response: Contact System Programmer.

OS$JS2214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$JES2B,OS$JES2G

Operator Response: Contact System Programmer.

OS$J2M214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2MCx

Operator Response: Contact System Programmer.

OS$J2R214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2ERx

Operator Response: Contact System Programmer.

OS$J2S214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2SCx

Operator Response: Contact System Programmer.

OS$J3E214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J3ECN

Operator Response: Contact System Programmer.

OS$J3S214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J3SVC

Operator Response: Contact System Programmer.

OS$LOK214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$LOCK

Operator Response: Contact System Programmer.

OS$RCN214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$RACCN

Operator Response: Contact System Programmer.

OS$SCN214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$SAFCN,OS$SMFCN

Operator Response: Contact System Programmer.

OS$TCN214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$TSOCN

Operator Response: Contact System Programmer.

OS$TPS214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$TPSHR

Operator Response: Contact System Programmer.

OS$UJI214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$UJI

Operator Response: Contact System Programmer.

OS$USI214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$USI

Operator Response: Contact System Programmer.

OS$VCN214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$SVCCN

Operator Response: Contact System Programmer.

OS$X05214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2X05

Operator Response: Contact System Programmer.

OS$02F214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$0002F

Operator Response: Contact System Programmer.

OS$1PL214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$IPL1

Operator Response: Contact System Programmer.

OS$2H5214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2H5x

Operator Response: Contact System Programmer.

OS$2P4214

ABEND AREGS 8-9: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2P4x

Operator Response: Contact System Programmer.

OS$ACN215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ALCCN

Operator Response: Contact System Programmer.

OS$ALC215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ALLO0,OS$ALLO1

Operator Response: Contact System Programmer.

OS$ASY215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ASYNC

Operator Response: Contact System Programmer.

OS$CMD215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$CMD

Operator Response: Contact System Programmer.

OS$COM215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$COMM

Operator Response: Contact System Programmer.

OS$DCN215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$DADCN

Operator Response: Contact System Programmer.

OS$DC1215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$DCB1

Operator Response: Contact System Programmer.

OS$EXR215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$EXRTN

Operator Response: Contact System Programmer.

OS$FRA215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$FRACN

Operator Response: Contact System Programmer.

OS$FTN215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$FRRTN

Operator Response: Contact System Programmer.

OS$HCN215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$HSMCN

Operator Response: Contact System Programmer.

OS$HSP215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$HJ20x

Operator Response: Contact System Programmer.

OS$IAT215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$INTK

Operator Response: Contact System Programmer.

OS$ICN215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ISPCN

Operator Response: Contact System Programmer.

OS$IPL215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$IPL

Operator Response: Contact System Programmer.

OS$JS2215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$JES2B,OS$JES2G

Operator Response: Contact System Programmer.

OS$J2M215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2MCx

Operator Response: Contact System Programmer.

OS$J2R215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2ERx

Operator Response: Contact System Programmer.

OS$J2S215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2SCx

Operator Response: Contact System Programmer.

OS$J3E215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J3ECN

Operator Response: Contact System Programmer.

OS$J3S215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J3SVC

Operator Response: Contact System Programmer.

OS$LOK215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$LOCK

Operator Response: Contact System Programmer.

OS$RCN215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$RACCN

Operator Response: Contact System Programmer.

OS$SCN215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$SAFCN,OS$SMFCN

Operator Response: Contact System Programmer.

OS$TCN215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$TSOCN

Operator Response: Contact System Programmer.

OS$TPS215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$TPSHR

Operator Response: Contact System Programmer.

OS$UJI215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$UJI

Operator Response: Contact System Programmer.

OS$USI215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$USI

Operator Response: Contact System Programmer.

OS$VCN215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$SVCCN

Operator Response: Contact System Programmer.

OS$X05215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2X05

Operator Response: Contact System Programmer.

OS$02F215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$0002F

Operator Response: Contact System Programmer.

OS$1PL215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$IPL1

Operator Response: Contact System Programmer.

OS$2H5215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2H5x

Operator Response: Contact System Programmer.

OS$2P4215

ABEND AREGS 10-11: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2P4x

Operator Response: Contact System Programmer.

OS$ACN216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ALCCN

Operator Response: Contact System Programmer.

OS$ALC216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ALLO0,OS$ALLO1

Operator Response: Contact System Programmer.

OS$ASY216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ASYNC

Operator Response: Contact System Programmer.

OS$CMD216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$CMD

Operator Response: Contact System Programmer.

OS$COM216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$COMM

Operator Response: Contact System Programmer.

OS$DCN216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$DADCN

Operator Response: Contact System Programmer.

OS$DC1216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$DCB1

Operator Response: Contact System Programmer.

OS$EXR216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$EXRTN

Operator Response: Contact System Programmer.

OS$FRA216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$FRACN

Operator Response: Contact System Programmer.

OS$FTN216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$FRRTN

Operator Response: Contact System Programmer.

OS$HCN216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$HSMCN

Operator Response: Contact System Programmer.

OS$HSP216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$HJ20x

Operator Response: Contact System Programmer.

OS$IAT216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$INTK

Operator Response: Contact System Programmer.

OS$ICN216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ISPCN

Operator Response: Contact System Programmer.

OS$IPL216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$IPL

Operator Response: Contact System Programmer.

OS$JS2216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$JES2B,OS$JES2G

Operator Response: Contact System Programmer.

OS$J2M216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2MCx

Operator Response: Contact System Programmer.

OS$J2R216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2ERx

Operator Response: Contact System Programmer.

OS$J2S216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2SCx

Operator Response: Contact System Programmer.

OS$J3E216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J3ECN

Operator Response: Contact System Programmer.

OS$J3S216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J3SVC

Operator Response: Contact System Programmer.

OS$LOK216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$LOCK

Operator Response: Contact System Programmer.

OS$RCN216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$RACCN

Operator Response: Contact System Programmer.

OS$SCN216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$SAFCN,OS$SMFCN

Operator Response: Contact System Programmer.

OS$TCN216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$TSOCN

Operator Response: Contact System Programmer.

OS$TPS216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$TPSHR

Operator Response: Contact System Programmer.

OS$UJI216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$UJI

Operator Response: Contact System Programmer.

OS$USI216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$USI

Operator Response: Contact System Programmer.

OS$VCN216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$SVCCN

Operator Response: Contact System Programmer.

OS$X05216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2X05

Operator Response: Contact System Programmer.

OS$02F216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$0002F

Operator Response: Contact System Programmer.

OS$1PL216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$IPL1

Operator Response: Contact System Programmer.

OS$2H5216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2H5x

Operator Response: Contact System Programmer.

OS$2P4216

ABEND AREGS 12-13: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2P4x

Operator Response: Contact System Programmer.

OS$ACN217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ALCCN

Operator Response: Contact System Programmer.

OS$ALC217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ALLO0,OS$ALLO1

Operator Response: Contact System Programmer.

OS$ASY217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ASYNC

Operator Response: Contact System Programmer.

OS$CMD217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$CMD

Operator Response: Contact System Programmer.

OS$COM217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$COMM

Operator Response: Contact System Programmer.

OS$DCN217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$DADCN

Operator Response: Contact System Programmer.

OS$DC1217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$DCB1

Operator Response: Contact System Programmer.

OS$EXR217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$EXRTN

Operator Response: Contact System Programmer.

OS$FRA217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$FRACN

Operator Response: Contact System Programmer.

OS$FTN217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$FRRTN

Operator Response: Contact System Programmer.

OS$HCN217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$HSMCN

Operator Response: Contact System Programmer.

OS$HSP217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$HJ20x

Operator Response: Contact System Programmer.

OS$IAT217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$INTK

Operator Response: Contact System Programmer.

OS$ICN217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$ISPCN

Operator Response: Contact System Programmer.

OS$IPL217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$IPL

Operator Response: Contact System Programmer.

OS$JS2217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$JES2B,OS$JES2G

Operator Response: Contact System Programmer.

OS$J2M217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2MCx

Operator Response: Contact System Programmer.

OS$J2R217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2ERx

Operator Response: Contact System Programmer.

OS$J2S217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2SCx

Operator Response: Contact System Programmer.

OS$J3E217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J3ECN

Operator Response: Contact System Programmer.

OS$J3S217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J3SVC

Operator Response: Contact System Programmer.

OS$LOK217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$LOCK

Operator Response: Contact System Programmer.

OS$RCN217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$RACCN

Operator Response: Contact System Programmer.

OS$SCN217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$SAFCN,OS$SMFCN

Operator Response: Contact System Programmer.

OS$TCN217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$TSOCN

Operator Response: Contact System Programmer.

OS$TPS217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$TPSHR

Operator Response: Contact System Programmer.

OS$UJI217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$UJI

Operator Response: Contact System Programmer.

OS$USI217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$USI

Operator Response: Contact System Programmer.

OS$VCN217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$SVCCN

Operator Response: Contact System Programmer.

OS$X05217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2X05

Operator Response: Contact System Programmer.

OS$02F217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$0002F

Operator Response: Contact System Programmer.

OS$1PL217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$IPL1

Operator Response: Contact System Programmer.

OS$2H5217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2H5x

Operator Response: Contact System Programmer.

OS$2P4217

ABEND AREGS 14-15: nnnnnnnnnnnnnnnn nnnnnnnnnnnnnnnn

Explanation: The OS/EM has detected a MVS System Abend during execution of an OS/EM optional function or a User exit. This message applies to z/OS environments operating in 64-bit mode.

nnnnnnnnnnnnnnnn: Contents of the General Purpose Register.

Source: OS$J2P4x

Operator Response: Contact System Programmer.

OS$ACT218

DSN=xxxx.xxxx.xxxx DELETED BY OS/EM QUICKDELETE

Explanation: A migrated dataset has been deleted by the OS/EM Quickdelete function.

xxxx.xxxx.xxxx: The deleted dataset name.

Source: OS$ACTRT

System Action: None. Informational message only.

Operator Response: None.

System Programmer Response: None.

OS$B14218

DSN=xxxx.xxxx.xxxx DELETED BY OS/EM QUICKDELETE

Explanation: A migrated dataset has been deleted by the OS/EM Quickdelete function.

xxxx.xxxx.xxxx: The deleted dataset name.

Source: OS$BR14

System Action: None. Informational message only.

Operator Response: None.

System Programmer Response: None.

OS$IPL219

req MACRO/SERVICE FAILED, RC= rc REAS = rsn

Explanation: A macro or service request failed.

req: The name of the macro or service.

rc: The return code.

rsn: The reason code.

Source: OS$IPL

System Action: The OS/EM function is terminated.

Operator Response: Notify the Systems Programmer.

System Programmer Response: Contact OS/EM Technical Support.

OS$X06219

req MACRO/SERVICE FAILED, RC= rc REAS = rsn

Explanation: A macro or service request failed.

req: The name of the macro or service.

rc: The return code.

rsn: The reason code.

Source: OS$J2X06

System Action: The OS/EM function is terminated.

Operator Response: Notify the Systems Programmer.

System Programmer Response: Contact OS/EM Technical Support.

OS$X44219

req MACRO/SERVICE FAILED, RC= rc REAS = rsn

Explanation: A macro or service request failed.

req: The name of the macro or service.

rc: The return code.

rsn: The reason code.

Source: OS$J2X44

System Action: The OS/EM function is terminated.

Operator Response: Notify the Systems Programmer.

System Programmer Response: Contact OS/EM Technical Support.

OS$ACN220

OS/EM LOAD LIBRARY INCORRECT FOR PROCESSOR MODE

Explanation: The OS/EM load library defined in the LINKLST is not supported by the current system addressing mode. For example, your environment uses 31-bit addressing and the LINKLST points to the 64-bit load library.

Source: OS$ALCCN

System Action: The OS/EM function is terminated.

Operator Response: Notify the Systems Programmer.

System Programmer Response: Correct the LINKLST definition to point to the correct OS/EM load library. Using OS/EM distribution naming conventions, LOAD1 is the 31-bit mode load library, LOAD2 is the 64-bit mode load library.

OS$DCN220

OS/EM LOAD LIBRARY INCORRECT FOR PROCESSOR MODE

Source: OS$DADCN

System Action: The OS/EM function is terminated.

Operator Response: Notify the Systems Programmer.

OS$FRA220

OS/EM LOAD LIBRARY INCORRECT FOR PROCESSOR MODE

Source: OS$FRACN

System Action: The OS/EM function is terminated.

Operator Response: Notify the Systems Programmer.

OS$HCN220

OS/EM LOAD LIBRARY INCORRECT FOR PROCESSOR MODE

Source: OS$HSMCN

System Action: The OS/EM function is terminated.

Operator Response: Notify the Systems Programmer.

OS$HSP220

OS/EM LOAD LIBRARY INCORRECT FOR PROCESSOR MODE

Source: OS$HJ20x

System Action: The OS/EM function is terminated.

Operator Response: Notify the Systems Programmer.

OS$ICN220

OS/EM LOAD LIBRARY INCORRECT FOR PROCESSOR MODE

Source: OS$ISPCN

System Action: The OS/EM function is terminated.

Operator Response: Notify the Systems Programmer.

OS$IPL220

OS/EM LOAD LIBRARY INCORRECT FOR PROCESSOR MODE

Source: OS$IPL

System Action: The OS/EM function is terminated.

Operator Response: Notify the Systems Programmer.

OS$RCN220

OS/EM LOAD LIBRARY INCORRECT FOR PROCESSOR MODE

Source: OS$RACCN

System Action: The OS/EM function is terminated.

Operator Response: Notify the Systems Programmer.

OS$SCN220

OS/EM LOAD LIBRARY INCORRECT FOR PROCESSOR MODE

Source: OS$SAFCN,OS$SMFCN

System Action: The OS/EM function is terminated.

Operator Response: Notify the Systems Programmer.

OS$TCN220

OS/EM LOAD LIBRARY INCORRECT FOR PROCESSOR MODE

Source: OS$TSOCN

System Action: The OS/EM function is terminated.

Operator Response: Notify the Systems Programmer.

OS$X06222

TIME PARAMETER MUST MATCH JES2 FOR THIS CLASS

Explanation: OS/EM Job Time Controls has been activated and a job has one of the following attributes:

TIME=MAXIMUM is specified
TIME=NOLIMIT is specified
The TIME= value is greater than the JES2 value for this jobclass

Source: OS$J2X06

System Action: If the Cancel Option is set to YES in Job Time Controls, the job is flushed. If the Cancel Option is set to NO, the TIME= value is reset to the maximum value set in JES2 for that jobclass.

Operator Response: Correct the TIME= value for the job to avoid warning messages or to allow the job to execute.

System Programmer Response: None.

OS$X09223

SYSOUT LIMIT FOR JOB jobname EXTENDED BY 99999 LINES/PAGES/BYTES.

Explanation: OS/EM has extended the number of lines/pages/bytes of sysout for the listed job.

Source: OS$J2X09

Operator Response: None.

System Programmer Response: None.

OS$X09224

SHOULD SYSOUT LIMIT FOR JOB jobname BE EXTENDED BY 99999 LINES/PAGES/BYTES?

Explanation: Should OS/EM extend the sysout limit for the listed job?

Source: OS$J2X09

Operator Response: Enter Y to allow the sysout extension or N to cancel the job.

System Programmer Response: None.

OS$HSP225

OS/EM FUNCTIONS WILL NOT BE AVAILABLE FOR THIS JES

Explanation: Errors occurred during the initialization of OS/EM JES2 services and so JES2 functions will not be available.

Source: OS$HJ20x

System Action: OS/EM services continue without JES2 functionality.

Operator Response: Contact the systems programmer.

System Programmer Response: Look for other OS/EM messages that will indicate the source of the errors. I correction procedures are not evident contact OS/EM Technical Support.

OS$HSP226

OS/EM FUNCTIONS WILL BE IMPAIRED FOR THIS JES

Explanation: Errors occurred during the initialization of OS/EM JES2 services and certain JES2 functions will not be available.

Source: OS$HJ20x

System Action: OS/EM services continue without some JES2 functionality.

Operator Response: Contact the systems programmer.

System Programmer Response: Look for other OS/EM messages that will indicate the source of the errors. If correction procedures are not evident contact OS/EM Technical support.

OS$X24226

OS/EM FUNCTIONS WILL BE IMPAIRED FOR THIS JES

Explanation: Errors occurred during the initialization of OS/EM JES2 services and certain JES2 functions will not be available.

Source: OS$J2X24

System Action: OS/EM services continue without some JES2 functionality.

Operator Response: Contact the systems programmer.

System Programmer Response: Look for other OS/EM messages that will indicate the source of the errors. If correction procedures are not evident contact OS/EM Technical support.

OS$X00227

TOO MANY OS/EM type EXIT name ROUTINES

Explanation: The specified exit has more than 255 exit points defined to OS/EM.

type: The exit type.

name: The exit name.

Source: OS$J2X00

System Action: Exit processing continues. The 256th and subsequent entries for the exit are ignored.

Operator Response: Contact the systems programmer.

System Programmer Response: Review the exit definitions for this exit point. It may be necessary to consolidate functionality into a single user exit to overcome the limitation.

OS$2TP227

TOO MANY OS/EM type EXIT name ROUTINES

Explanation: The specified exit has more than 255 exit points defined to OS/EM.

type: The exit type.

name: The exit name.

Source: OS$J2TPx

System Action: Exit processing continues. The 256th and subsequent entries for the exit are ignored.

Operator Response: Contact the systems programmer.

System Programmer Response: Review the exit definitions for this exit point. It may be necessary to consolidate functionality into a single user exit to overcome the limitation.

OS$JS2228

COMMAND IGNORED - VALID RESOURCE DATASET REQUIRED.

Explanation: A valid dataset name for the Job Routing Resources has not been entered. No Job Routing commands can be processed.

Source: OS$JES2G

Operator Response: Notify System Programmer.

System Programmer Response: Enter a valid Job Routing Resource dataset.

OS$REL229

modname:entry ENABLED

Explanation: The user exit has been loaded and enabled.

Source: OS$RELOD

System Action: None. Informational message.

Operator Response: None.

System Programmer Response: None.

OS$X06230

JOB SCHENV CONVERTED TO OS/EM JOBROUTE

Explanation: A Workload Manager scheduling environment was coded for this job and OS/EM has converted it to a Job Routing RESOURCE name.

Source: OS$J2X06

Operator Response: None

System Programmer Response: None

OS$USI232

CATALOG SEARCH FOR xxx FAILED. RC = n, RSN = n

Explanation: The QuickDelete function has done a catalog search for dataset 'xxx' and the catalog search has failed. QuickDelete will not try to process this dataset.

Source: OS$USI

Operator Response: None

System Programmer Response: None

OS$ACT233

ARCHDEL FOR datasetname FAILED. RC = nnnn

Explanation: The QuickDelete function has requested that DFSMSHSM delete the DSN 'datasetname', however DFSMSHSM was unable to process the request.

Source: OS$ACTRT

Operator Response: Notify the System Programmer

System Programmer Response: Determine why DFSMSHSM was unable to process the delete request then resubmit the job.

OS$B14233

ARCHDEL FOR datasetname FAILED. RC = nnnn

Explanation: The QuickDelete function has requested that DFSMSHSM delete the DSN 'datasetname', however DFSMSHSM was unable to process the request.

Source: OS$BR14

Operator Response: Notify the System Programmer

System Programmer Response: Determine why DFSMSHSM was unable to process the delete request then resubmit the job.

OS$X06234

VALID TIME PARAMETER REQUIRED ON JOB CARD

Explanation: This job requires a valid time parameter on the jobcard.

Source: OS$J2X06

Operator Response: Add a valid time parameter to the jobcard and resubmit the job.

System Programmer Response: None

OS$2TP235

OVER 254 ROUTINES FOR function EXIT name, LAST ROUTINE IGNORED

Explanation: Too many user exit routines have been defined in OS/EM for the specified exit point.

function -�The functional group for the user exit (e.g. SMF, JES2).

name -��The user exit point name.

Source: OS$J2TP

System Action: The 255th and subsequent exit definitions are ignored.

Operator Response: None

System Programmer Response: Ensure that no more than 254 routines are defined for the user exit point (OS/EM Basic Exit Functions).

OS$REL236

module LOAD SUPPRESSED. UNABLE TO ACCESS jessys A.S. RSN = rescode

Explanation: The specified module could not be loaded because the required JES2 address space could not be accessed.

module: The name of the load module that could not be loaded.

jessys: The subsystem name of the JES2 address space that could not be accessed.

rescode: The reason code from the LOCASCB system request. Consult the MVS Programming: Authorized Assembler Services Reference for the reason code explanations.

Source: OS$RELOD

System Action: The specified module is not loaded.

Operator Response: Contact the Systems Programmer.

System Programmer Response: Correct the problem that is causing the JES2 system to be inaccessible.

OS$IPL237

OS/EM EXIT name NOT FOUND IN DYNAMIC LPA

Explanation: The specified OS/EM exit module was not located in the Dynamic Link Pack Area (LPA).

name: The name of the load module that could not be located.

Source: OS$IPL

System Action: OS/EM will not be initialized or will operate with limited functionality.

Operator Response: None

System Programmer Response: Verify that the load module is correctly defined to the IEALPAxx MVS initialization parameter member. Refer to the OS/EM Installation Guide and the MVS Initialization and Tuning Reference.

OS$IPL238

REMOVAL OF NULL EXIT module FROM EXITPOINT exit-name FAILED, CSVDYNEX RC = retcode RSN = rsncode

Explanation: OS/EM attempted to remove a null exit routine that was defined to a particular exit point, but the request failed.

module: The name of the load module that contained the null exit routine.

exit-name: The name of the exit.

retcode: The return code from the CSVDYNEX function request.

rsncode: The reason code from the CSVDYNEX function request.

Source: OS$IPL

System Action: OS/EM initialization continues. The user exit module is disabled but remains loaded.

Operator Response: None

System Programmer Response: Determine the reason for failure (consult the MVS Authorized Assembler Services Reference for the CSVDYNEX function). Also, it may be useful to disable and/or delete the null exit module from the exit definitions for future initializations of OS/EM (Basic Exit Functions).

OS$IPL239

NULL EXIT module REMOVED FROM EXITPOINT exit-name

Explanation: OS/EM found a null exit routine and successfully removed it from the exit list.

module: The name of the load module that contained the null exit routine.

exit-name: The name of the exit.

Source: OS$IPL

Operator Response: None

System Programmer Response: None

OS$IPL240

OS/EM EXIT module DEFINED TO EXITPOINT exit-name

Explanation: An OS/EM module has been successfully defined to the specified exit point.

module: The name of the OS/EM load module.

exit-name: The name of the exit point.

Source: OS$IPL

Operator Response: None

System Programmer Response: None

OS$JS2241

subsys OS/EM function FUNCTION REQUESTED

Explanation: An OS/EM function has been requested for the specified JES2 subsystem name.

subsys: The name of the JES2 subsystem requesting the OS/EM functionality

function: The name of the OS/EM function being requested.

Source: OS$JES2D,OS$JES2F,OS$JES2G

Operator Response: None

System Programmer Response: None

OS$2D0242

subsys OS/EM function INITIALIZATION STARTING

Explanation: The OS/EM function has begun initialization.

subsys: The name of the JES2 subsystem requesting the OS/EM functionality.

function: The name of the OS/EM function being initialized.

Source OS$J2D0x

Operator Response: None

System Programmer Response: None

OS$2H0242

subsys OS/EM function INITIALIZATION STARTING

Explanation: The OS/EM function has begun initialization.

subsys: The name of the JES2 subsystem requesting the OS/EM functionality.

function: The name of the OS/EM function being initialized.

Source OS$J2H0x

Operator Response: None

System Programmer Response: None

OS$2L0242

subsys OS/EM function INITIALIZATION STARTING

Explanation: The OS/EM function has begun initialization.

subsys: The name of the JES2 subsystem requesting the OS/EM functionality.

function: The name of the OS/EM function being initialized.

Source OS$J2L0x

Operator Response: None

System Programmer Response: None

ENTER 'Y' TO CONTINUE WITHOUT function, 'N' TO TERMINATE subsys

Explanation: The operator is being prompted to instruct OS/EM how proceed following an initialization failure of the specified function.

function: The name of the OS/EM function that failed.

subsys: The name of the JES2 subsystem that is affected by the initialization failure.

Source: OS$J2D0x

Operator Response: Reply Y to proceed with initialization without the failed function, or N to terminate the JES2 system.

System Programmer Response: Determine the cause of the error and correct. Re-initialize OS/EM by executing the OS/EM started task (i.e. S OSVx,SUB=MSTR).

OS$2H0245

ENTER 'Y' TO CONTINUE WITHOUT function, 'N' TO TERMINATE subsys

Explanation: The operator is being prompted to instruct OS/EM how proceed following an initialization failure of the specified function.

function: The name of the OS/EM function that failed.

subsys: The name of the JES2 subsystem that is affected by the initialization failure.

Source: OS$J2H0x

Operator Response: Reply Y to proceed with initialization without the failed function, or N to terminate the JES2 system.

System Programmer Response: Determine the cause of the error and correct. Re-initialize OS/EM by executing the OS/EM started task (i.e. S OSVx,SUB=MSTR).

OS$2H4245

ENTER 'Y' TO CONTINUE WITHOUT function, 'N' TO TERMINATE subsys

Explanation: The operator is being prompted to instruct OS/EM how proceed following an initialization failure of the specified function.

function: The name of the OS/EM function that failed.

subsys: The name of the JES2 subsystem that is affected by the initialization failure.

Source: OS$J2H4x

Operator Response: Reply Y to proceed with initialization without the failed function, or N to terminate the JES2 system.

System Programmer Response: Determine the cause of the error and correct. Re-initialize OS/EM by executing the OS/EM started task (i.e. S OSVx,SUB=MSTR).

OS$2L0245

ENTER 'Y' TO CONTINUE WITHOUT function, 'N' TO TERMINATE subsys

Explanation: The operator is being prompted to instruct OS/EM how proceed following an initialization failure of the specified function.

function: The name of the OS/EM function that failed.

subsys: The name of the JES2 subsystem that is affected by the initialization failure.

Source: OS$J2L0x

Operator Response: Reply Y to proceed with initialization without the failed function, or N to terminate the JES2 system.

System Programmer Response: Determine the cause of the error and correct. Re-initialize OS/EM by executing the OS/EM started task (i.e. S OSVx,SUB=MSTR).

OS$2L4245

ENTER 'Y' TO CONTINUE WITHOUT function, 'N' TO TERMINATE subsys

Explanation: The operator is being prompted to instruct OS/EM how proceed following an initialization failure of the specified function.

function: The name of the OS/EM function that failed.

subsys: The name of the JES2 subsystem that is affected by the initialization failure.

Source: OS$J2L4x

Operator Response: Reply Y to proceed with initialization without the failed function, or N to terminate the JES2 system.

System Programmer Response: Determine the cause of the error and correct. Re-initialize OS/EM by executing the OS/EM started task (i.e. S OSVx,SUB=MSTR).

OS$2M0245

ENTER 'Y' TO CONTINUE WITHOUT function, 'N' TO TERMINATE subsys

Explanation: The operator is being prompted to instruct OS/EM how proceed following an initialization failure of the specified function.

function: The name of the OS/EM function that failed.

subsys: The name of the JES2 subsystem that is affected by the initialization failure.

Source: OS$J2M0x

Operator Response: Reply Y to proceed with initialization without the failed function, or N to terminate the JES2 system.

System Programmer Response: Determine the cause of the error and correct. Re-initialize OS/EM by executing the OS/EM started task (i.e. S OSVx,SUB=MSTR).

OS$2M4245

ENTER 'Y' TO CONTINUE WITHOUT function, 'N' TO TERMINATE subsys

Explanation: The operator is being prompted to instruct OS/EM how proceed following an initialization failure of the specified function.

function: The name of the OS/EM function that failed.

subsys: The name of the JES2 subsystem that is affected by the initialization failure.

Source: OS$J2M4x

Operator Response: Reply Y to proceed with initialization without the failed function, or N to terminate the JES2 system.

System Programmer Response: Determine the cause of the error and correct. Re-initialize OS/EM by executing the OS/EM started task (i.e. S OSVx,SUB=MSTR).

OS$X24245

ENTER 'Y' TO CONTINUE WITHOUT function, 'N' TO TERMINATE subsys

Explanation: The operator is being prompted to instruct OS/EM how proceed following an initialization failure of the specified function.

function: The name of the OS/EM function that failed.

subsys: The name of the JES2 subsystem that is affected by the initialization failure.

Source: OS$J2X24

Operator Response: Reply Y to proceed with initialization without the failed function, or N to terminate the JES2 system.

System Programmer Response: Determine the cause of the error and correct. Re-initialize OS/EM by executing the OS/EM started task (i.e. S OSVx,SUB=MSTR).

OS$2D1246

subsys OS/EM function TERMINATION STARTING

Explanation: OS/EM has commenced terminating the specified function.

subsys: The name of the JES2 subsystem that was executing the OS/EM function.

function: The name of the OS/EM function being terminated.

Source: OS$J2D1x

Operator Response: None

System Programmer Response: None

OS$2H1246

subsys OS/EM function TERMINATION STARTING

Explanation: OS/EM has commenced terminating the specified function.

subsys: The name of the JES2 subsystem that was executing the OS/EM function.

function: The name of the OS/EM function being terminated.

Source: OS$J2H1x

Operator Response: None

System Programmer Response: None

OS$2L1246

subsys OS/EM function TERMINATION STARTING

Explanation: OS/EM has commenced terminating the specified function.

subsys: The name of the JES2 subsystem that was executing the OS/EM function.

function: The name of the OS/EM function being terminated.

Source: OS$J2L1x

Operator Response: None

System Programmer Response: None

OS$2M1246

subsys OS/EM function TERMINATION STARTING

Explanation: OS/EM has commenced terminating the specified function.

subsys: The name of the JES2 subsystem that was executing the OS/EM function.

function: The name of the OS/EM function being terminated.

Source: OS$J2M1x

Operator Response: None

System Programmer Response: None

OS$2D1247

subsys OS/EM function TERMINATION COMPLETE

Explanation: OS/EM has terminated the specified function.

subsys: The name of the JES2 subsystem that was executing the OS/EM function.

function: The name of the OS/EM function that was terminated.

Source: OS$J2D1x

Operator Response: None

System Programmer Response: None

OS$2H1247

subsys OS/EM function TERMINATION COMPLETE

Explanation: OS/EM has terminated the specified function.

subsys: The name of the JES2 subsystem that was executing the OS/EM function.

function: The name of the OS/EM function that was terminated.

Source: OS$J2H1x

Operator Response: None

System Programmer Response: None

OS$2L1247

subsys OS/EM function TERMINATION COMPLETE

Explanation: OS/EM has terminated the specified function.

subsys: The name of the JES2 subsystem that was executing the OS/EM function.

function: The name of the OS/EM function that was terminated.

Source: OS$J2L1x

Operator Response: None

System Programmer Response: None

OS$2M1247

subsys OS/EM function TERMINATION COMPLETE

Explanation: OS/EM has terminated the specified function.

subsys: The name of the JES2 subsystem that was executing the OS/EM function.

function: The name of the OS/EM function that was terminated.

Source: OS$J2M1x

Operator Response: None

System Programmer Response: None

OS$ACT248

jobname/procname/stepname/program COND = condcode CPU=cputime I/O=iocount

Explanation: This message displays the completion statistics at the completion of the job step.

jobname: The name of job.

procname: The name of PROC (if any) that was executed.

stepname: The name of job step (if any) that was executed.

program: The name of the program that was executed.

condcode: The condition code returned by the program.

cputime: The CPU time (in minutes) that was consumed by the job step.

iocount: The number of I/O operations performed by the job step.

Source: OS$ACTRT

Operator Response: None

System Programmer Response: None

OS$X32249

jobname(jobnum) NOT ELIGIBLE TO RUN NOW{: reason}

Explanation: The job cannot be immediately executed due to the stated reason.

jobname: The name of job.

jobnum: The JES job number.

reason: The reason that the job cannot be executed.

Source: OS$J2X32

Operator Response: If necessary, correct the situation that has caused the delay so the job will start.

System Programmer Response: None

OS$X49249

jobname(jobnum) NOT ELIGIBLE TO RUN NOW{: reason}

Explanation: The job cannot be immediately executed due to the stated reason.

jobname: The name of job.

jobnum: The JES job number.

reason: The reason that the job cannot be executed.

Source: OS$J2X49

Operator Response: If necessary, correct the situation that has caused the delay so the job will start.

System Programmer Response: None

OS$2DM249

jobname(jobnum) NOT ELIGIBLE TO RUN NOW{: reason}

Explanation: The job cannot be immediately executed due to the stated reason.

jobname: The name of job.

jobnum: The JES job number.

reason: The reason that the job cannot be executed.

Source: OS$J2DJx

Operator Response: If necessary, correct the situation that has caused the delay so the job will start.

System Programmer Response: None

OS$2DM250

OS/EM subsys function OPTIONS SET BY SYSTEM sysid JOB jobname

Explanation: MAS-wide options for an OS/EM function has been set by a job on another system opearting within the MAS.

subsys: The name of the JES2 subsystem.

function: The name of the OS/EM function.

sysid: The name of the system that set the options.

jobname: The name of the job that set the options.

Source: OS$J2DMx

Operator Response: None

System Programmer Response: None

OS$2D0250

OS/EM subsys function OPTIONS SET BY SYSTEM sysid JOB jobname

Explanation: MAS-wide options for an OS/EM function has been set by a job on another system opearting within the MAS.

subsys: The name of the JES2 subsystem.

function: The name of the OS/EM function.

sysid: The name of the system that set the options.

jobname: The name of the job that set the options.

Source: OS$J2D0x

Operator Response: None

System Programmer Response: None

OS$2HM250

OS/EM subsys function OPTIONS SET BY SYSTEM sysid JOB jobname

Explanation: MAS-wide options for an OS/EM function has been set by a job on another system opearting within the MAS.

subsys: The name of the JES2 subsystem.

function: The name of the OS/EM function.

sysid: The name of the system that set the options.

jobname: The name of the job that set the options.

Source: OS$J2HMx

Operator Response: None

System Programmer Response: None

OS$2H0250

OS/EM subsys function OPTIONS SET BY SYSTEM sysid JOB jobname

Explanation: MAS-wide options for an OS/EM function has been set by a job on another system opearting within the MAS.

subsys: The name of the JES2 subsystem.

function: The name of the OS/EM function.

sysid: The name of the system that set the options.

jobname: The name of the job that set the options.

Source: OS$J2H0x

Operator Response: None

System Programmer Response: None

OS$2LM250

OS/EM subsys function OPTIONS SET BY SYSTEM sysid JOB jobname

Explanation: MAS-wide options for an OS/EM function has been set by a job on another system opearting within the MAS.

subsys: The name of the JES2 subsystem.

function: The name of the OS/EM function.

sysid: The name of the system that set the options.

jobname: The name of the job that set the options.

Source: OS$J2LMx

Operator Response: None

System Programmer Response: None

OS$2L0250

OS/EM subsys function OPTIONS SET BY SYSTEM sysid JOB jobname

Explanation: MAS-wide options for an OS/EM function has been set by a job on another system opearting within the MAS.

subsys: The name of the JES2 subsystem.

function: The name of the OS/EM function.

sysid: The name of the system that set the options.

jobname: The name of the job that set the options.

Source: OS$J2L0x

Operator Response: None

System Programmer Response: None

OS$2MM250

OS/EM subsys function OPTIONS SET BY SYSTEM sysid JOB jobname

Explanation: MAS-wide options for an OS/EM function has been set by a job on another system opearting within the MAS.

subsys: The name of the JES2 subsystem.

function: The name of the OS/EM function.

sysid: The name of the system that set the options.

jobname: The name of the job that set the options.

Source: OS$J2MMx

Operator Response: None

System Programmer Response: None

OS$2M0250

OS/EM subsys function OPTIONS SET BY SYSTEM sysid JOB jobname

Explanation: MAS-wide options for an OS/EM function has been set by a job on another system opearting within the MAS.

subsys: The name of the JES2 subsystem.

function: The name of the OS/EM function.

sysid: The name of the system that set the options.

jobname: The name of the job that set the options.

Source: OS$J2M0x

Operator Response: None

jobname(jobnum {FROM sysid}) WAITING FOR DATASETS

Explanation: The job cannot be immediately executed because another job is using one or more datasets to be processed.

jobname: The name of job.

jobnum: The job number.

sysid: The originating system.

Source: OS$J2D3x

System Action: The job will not be executed until the required dataset(s) are available.

Operator Response: This could be a temporary situation. If this is unexpected or is not resolved, use the MVS command 'D GRS,CONTENTION' to show which job or job are causing the wait.

System Programmer Response: None

OS$CMD255

DEVICE devnum OWNER = ownerid STATUS = devstatus

Explanation: This message is displayed in response to the D TAPESHR command (Display Tapeshare Device Status).

devnum: The device number being displayed.

ownerid: The owner of the device.

devstatus: The status of the device.

Source: OS$CMD

Operator Response: None.

System Programmer Response: None

OS$2D3256

jobname1(jobnum1) HOLDS dsn NEEDED BY jobname2(jobnum2)

Explanation: A job is preventing another job from executing because it currently holds a dataset that one or both of the jobs request for exclusive use.

jobname1: The name of job that is using the dataset.

jobnum1: The JES job number that is using the dataset.

dsn: The dataset that is in contention.

jobname2: The name of job that is waiting for the dataset.

jobnum2: The JES job number that is waiting for the dataset.

Source: OS$J2D3x

System Action: The second job will not be executed until the first job releases the dataset.

Operator Response: This may be a temporary situation. If this is a persistent problem, the user may wish to more closely coordinate the submission of the jobs (e.g. control the jobs with a job scheduling system). Also, verify that the job(s) actually require exclusive use (e.g. DISP=OLD / MOD) rather than shared access (i.e. DISP=SHR).

System Programmer Response: None

OS$2TP258

subsys EXIT exitname AUTOINSTALL COMPLETE FOR MODULE modname:entry

Explanation: OS/EM has activated a JES2 User Exit point with the OS/EM Autoinstall facility (i.e. no EXIT(nnn) statement was defined in the JES2 initialization parameters for an exit point required by OS/EM).

subsys: The name of the JES2 subsystem.

exitname: The user exit point name.

modname:entry: The load module and entry point that is activated for the user exit.

Source: OS$J2TPx

Operator Response: None

EXIT exitname ENTERED IN {HOME | XMEM} MODE, RUNNING UNDER A {TCB | SRB},

Explanation: The OS/EM test exit routine OS$TEXIT has been invoked by the named exit.

exitname: The exit name that invoked the test exit module.

Source: OS$TEXIT

System Action: Information message only. This message will be accompanied by messages OS$TEX262 and OS$TEX263.

Operator Response: None.

System Programmer Response: The test exit module OS$TEXIT should not be defined to OS/EM as an active user exit point unless instructed by technical support.

OS$TEX262

IN {PRIMARY | AR | HOME | SECONDARY} ASC MODE, {PROBLEM | SUPVR} STATE, KEY {0 | 1}, {ENABLED | DISABLED},

Explanation: The OS/EM test exit routine OS$TEXIT has been invoked by an exit point (indicated by message OS$TEX261).

Source: OS$TEXIT

System Action: Information message only. This message will be accompanied by messages OS$TEX261 and OS$TEX263.

Operator Response: None.

System Programmer Response: The test exit module OS$TEXIT should not be defined to OS/EM as an active user exit point unless instructed by technical support.

OS$TEX263

AMODE {24 | 31 | 64}, WITH lockinfo

Explanation: The OS/EM test exit routine OS$TEXIT has been invoked by an exit point (indicated by message OS$TEX261).

lockinfo: The details of any locks that are active.

Source: OS$TEXIT

System Action: Information message only. This message will be accompanied by messages OS$TEX261 and OS$TEX262.

Operator Response: None.

System Programmer Response: The test exit module OS$TEXIT should not be defined to OS/EM as an active user exit point unless instructed by technical support.

OS$2LM264

OS/EM jesid progname PGM LIMITS (local mas) SET BY SYSTEM sysid JOB jobname

Explanation: Program execution limits have been set by the specified job.

jesid: The name of the JES2 subsystem that is affected.

progname: The name of program that is being limited.

local: The execution limits for the program on an individual system.

mas: The MAS-wide execution limits for the program.

sysid: The system name that set the execution limits.

jobname: The job name that set the execution limits.

Source: OS$J2LMx

System Action: OS/EM will limit concurrent execution of the program as per the specified values.

Operator Response: None.

System Programmer Response: None.

OS$STM265

FUNCTION REQUIRES ACF2 SECURITY SYSTEM

Explanation: A request was made to set the OS/EM SYSTEM option ACF2CAN / NOACF2CAN (i.e. override of the ACF2 non-cancel user attribute) but ACF2 is not the active security system.

Source: OS$SYSTM

System Action: The request is ignored.

Operator Response: None.

System Programmer Response: None

OS$2S0266

OS/EM jesid SUBTASK {INITIALIZATION COMPLETE | TERMINATING}

Explanation: The OS/EM management subtask for the named JES2 system has been initialized or is being terminated.

jesid: The name of the JES2 subsystem that is affected.

Source: OS$J2S0x

System Action: Processing continues.

Operator Response: None.

System Programmer Response: None.

OS$LOD267

{subsystem} MODULE program NOT RELOADED (loadaddr) {VERSION verinfo}

Explanation: The specified module was not reloaded because a identical copy of the module had already been loaded.

subsystem: The subsystem that the module operates with (e.g. JES2)

program: Exit point name being processed.

loadaddr: The load address of the module.

verinfo: The version number and generation date & time of module. This applies only to OS/EM system modules.

Source: OS$LOAD

System Action: OS/EM continues.

Operator Response: None.

System Programmer Response: None.

OS$DMP1001

asid DATA AREA

Explanation: This is an information message that indicates the address space or JES2 system that is being dumped.

asid: The address space number or the JES2 subsystem name.

Source: OS$LOAD

System Action: None.

Operator Response: None.

System Programmer Response: None

OS$DMP1002

hex dump data

Explanation: This message contains a hex display of the selected storage location.

Source: OS$LOAD

System Action: None.

Operator Response: None.

System Programmer Response: None

OS$DMP1003

DATA AREA IS INVALID

Explanation: The data area cannot be displayed.

Source: OS$LOAD

System Action: None.

Operator Response: None.

System Programmer Response: None

OS$DMP1004

subsys DATA AREA IS NOT PRESENT

Explanation: The data area for the named JES2 system is no longer available to be displayed.

Source: OS$LOAD

System Action: None.

Operator Response: None.

System Programmer Response: None

Appendix A. $HASP Messages for Job Routing

The following messages may be issued by the OS/EM Job Routing option:

$HASP606 INSUFFICIENT OPERANDS

Produced by the $LN command.

$HASP608 OS/EM STATUS UNKNOWN

$HASP610 JOB(S) NOT FOUND

$HASP619 NO OUTPUT QUEUED

Produced by the $LF command.

$HASP624 'CMD' 'JOBNAME' MULTIPLE JOBS FOUND

Produced by a $Qx command.

$HASP646 nn PERCENT SPOOL UTILIZATION

Produced by the $LN command.

$HASP668 NO DEVICE(S) FOUND

Produced by the $DP command.

$HASP687 UNABLE TO OBTAIN SECURITY PRODUCT MESSAGES

$HASP690 COMMAND REJECTED - AUTHORIZATION FAILURE

$HASP900 TOO MANY|FEW OPERANDS

$HASP901 INVALID OPERAND xxxxx

$HASP905 RESOURCE IN USE. YOU MUST USE 'FORCE' TO DELETE

Produced by the $QD command.

$HASP907 JOBNAME xxxx IS NOT SUITABLE FOR DJC

Produced by a $Qx command.

$HASP908 NO MATCH FOUND FOR SPECIFIED RESOURCE

Produced by the $QJ command.

$HASP921 LIST FORMS (multiple texts)

Produced by the $LF command.

$HASP928 DEVICE UNIT STATUS F=FORM Q=X

Produced by the $DP command.

$HASP931 * -- JOBROUTE FAILED - ALREADY 8 ROUTES IN USE

Produced by Exit 44, Maximum of 8 routes per job.

$HASP935 jjjj(nnn) JOBNAME SPECIFIED ON /*BEFORE STATEMENT IS INVALID. CORRECT - RESUBMIT.

$HASP936 jjjj(nnn) JOBNAME SPECIFIED ON /*AFTER STATEMENT IS INVALID. CORRECT - RESUBMIT.

$HASP937 jjjj(nnn) PARM SPECIFIED ON /*CNTL STATEMENT IS INVALID. CORRECT - RESUBMIT.

$HASP938 jjjj(nnn) ONLY n xxxxx STATEMENTS ALLOWED. CORRECT - RESUBMIT.

$HASP939 jjjj(nnn) JOBNAME SPECIFIED ON /*WITH STATEMENT IS INVALID. CORRECT - RESUBMIT.

$HASP940 jjjj(nnn) * -- AFTER JOBNAME = xxxx --

$HASP941 jjjj(nnn) * -- WITH JOBNAME = xxxx --

$HASP942 jjjj(nnn) * -- RESOURCE ROUTING = xxxxx --

$HASP943 jjjj(nnn) * -- CONTROL INFO = xxxxx --

$HASP944 jjjj(nnn) * -- BEFORE JOBNAME = xxxx --

$HASP945 LIST JOBQUEUE (multiple texts)

Produced by the $LQ/$LN commands.

$HASP946 SID - NO RESOURCES ATTACHED

Produced by the $DRESOURCE command.

$HASP947 DISPLAY RESOURCE (multiple texts)

Produced by the $DRESOURCE command.

$HASP948 DISPLAY CONFLICT (multiple texts)

Produced by the $DC command.

$HASP949 DISPLAY BACKLOG (multiple texts)

Produced by the $DB command.

$HASP950 jobname(JOBnnnn) * -- JOBROUTE 999 xxxxxx = y --

Produced when OS/EM generates an automatic route or a change to jobclass/priority, scheduling environment, service class or xeq node. Where 999 corresponds to the routing rule used to assign route xxxxx.

$HASP951 OS/EM VER n.n - JOBROUTING ACTIVE

Shows the version of OS/EM that is active, and informs the user that the JOBROUTING function is active.

Index

A M S

Abend Messages

AFF-0000, (10)

AFF-0004, (13)

AFF-0008, (16)

AFF-0012, (19)

AFF-0016, (22)

AFF-0020, (25)

AFF-0024, (28)

AFF-0028, (30)

AFF-0032, (34)

AFF-0036, (37)

System Code Format, (5)

Messages

AFF-0000, (8)

AFF-0004, (11)

AFF-0008, (14)

AFF-0012, (17)

AFF-0016, (20)

AFF-0020, (23)

AFF-0024, (26)

AFF-0028, (29)

AFF-0032, (32)

AFF-0036, (35)

Allocation Messages Format, (38)

Message Module Identifier, (43)

Not Cataloged 2, (40)

OS$ 'W21038, (196)

OS$ABN032, (189)

OS$ACN024, (97)

OS$ACN025, (121)

OS$ACN026, (130)

OS$ACN030, (145)

OS$ACN070, (292)

OS$ACN071, (326)

OS$ACN072, (360)

OS$ACN073, (393)

OS$ACN074, (427)

OS$ACN075, (461)

OS$ACN076, (495)

OS$ACN093, (561)

OS$ACN101, (600)

OS$ACN206, (755)

OS$ACN207, (789)

OS$ACN208, (823)

OS$ACN209, (857)

OS$ACN210, (891)

OS$ACN211, (925)

OS$ACN212, (959)

OS$ACN213, (993)

OS$ACN214, (1027)

OS$ACN215, (1061)

OS$ACN216, (1095)

OS$ACN217, (1129)

OS$ACN220, (1168)

OS$ACT096, (595)

OS$ACT097, (596)

OS$ACT098, (597)

OS$ACT099, (598)

OS$ACT121, (627)

OS$ACT218, (1163)

OS$ACT233, (1190)

OS$ACT248, (1234)

OS$AIF021, (76)

OS$ALC003, (47)

OS$ALC030, (146)

OS$ALC048, (211)

OS$ALC057, (248)

OS$ALC058, (261)

OS$ALC066, (280)

OS$ALC070, (293)

OS$ALC071, (327)

OS$ALC072, (361)

OS$ALC073, (394)

OS$ALC074, (428)

OS$ALC075, (462)

OS$ALC076, (496)

OS$ALC087, (546)

OS$ALC093, (562)

OS$ALC139, (645)

OS$ALC143, (660)

OS$ALC157, (685)

OS$ALC160, (689)

OS$ALC167, (706)

OS$ALC173, (718)

OS$ALC174, (719)

OS$ALC175, (720)

OS$ALC178, (723)

OS$ALC179, (724)

OS$ALC183, (729)

OS$ALC190, (737)

OS$ALC206, (756)

OS$ALC207, (790)

OS$ALC208, (824)

OS$ALC209, (858)

OS$ALC210, (892)

OS$ALC211, (926)

OS$ALC212, (960)

OS$ALC213, (994)

OS$ALC214, (1028)

OS$ALC215, (1062)

OS$ALC216, (1096)

OS$ALC217, (1130)

OS$ALC252, (1247)

OS$AOD259, (1263)

OS$ASY024, (98)

OS$ASY030, (147)

OS$ASY070, (294)

OS$ASY071, (328)

OS$ASY072, (362)

OS$ASY073, (395)

OS$ASY074, (429)

OS$ASY075, (463)

OS$ASY076, (497)

OS$ASY093, (563)

OS$ASY206, (757)

OS$ASY207, (791)

OS$ASY208, (825)

OS$ASY209, (859)

OS$ASY210, (893)

OS$ASY211, (927)

OS$ASY212, (961)

OS$ASY213, (995)

OS$ASY214, (1029)

OS$ASY215, (1063)

OS$ASY216, (1097)

OS$ASY217, (1131)

OS$ATH047, (210)

OS$B14066, (281)

OS$B14218, (1164)

OS$B14233, (1191)

OS$CAL082, (534)

OS$CMD027, (139)

OS$CMD070, (295)

OS$CMD071, (329)

OS$CMD072, (363)

OS$CMD073, (396)

OS$CMD074, (430)

OS$CMD075, (464)

OS$CMD076, (498)

OS$CMD093, (564)

OS$CMD140, (658)

OS$CMD141, (659)

OS$CMD185, (732)

OS$CMD188, (735)

OS$CMD189, (736)

OS$CMD206, (758)

OS$CMD207, (792)

OS$CMD208, (826)

OS$CMD209, (860)

OS$CMD210, (894)

OS$CMD211, (928)

OS$CMD212, (962)

OS$CMD213, (996)

OS$CMD214, (1030)

OS$CMD215, (1064)

OS$CMD216, (1098)

OS$CMD217, (1132)

OS$CMD255, (1260)

OS$COD031, (188)

OS$COD048, (212)

OS$COD049, (229)

OS$COD050, (230)

OS$COD051, (231)

OS$COD139, (646)

OS$COM024, (99)

OS$COM070, (296)

OS$COM071, (330)

OS$COM072, (364)

OS$COM073, (397)

OS$COM074, (431)

OS$COM075, (465)

OS$COM076, (499)

OS$COM093, (565)

OS$COM206, (759)

OS$COM207, (793)

OS$COM208, (827)

OS$COM209, (861)

OS$COM210, (895)

OS$COM211, (929)

OS$COM212, (963)

OS$COM213, (997)

OS$COM214, (1031)

OS$COM215, (1065)

OS$COM216, (1099)

OS$COM217, (1133)

OS$CTL004, (49)

OS$CTL022, (87)

OS$CTL040, (198)

OS$CTL041, (203)

OS$CTL042, (204)

OS$CTL043, (205)

OS$CTL044, (206)

OS$CTL045, (207)

OS$CTL046, (208)

OS$DAD030, (148)

OS$DAD048, (213)

OS$DAD057, (249)

OS$DAD058, (262)

OS$DAD139, (647)

OS$DAD252, (1248)

OS$DAP048, (214)

OS$DAP052, (232)

OS$DAP094, (594)

OS$DAP139, (648)

OS$DB4038, (195)

OS$DB4105, (611)

OS$DCN024, (100)

OS$DCN025, (122)

OS$DCN026, (131)

OS$DCN030, (149)

OS$DCN070, (297)

OS$DCN071, (331)

OS$DCN072, (365)

OS$DCN073, (398)

OS$DCN074, (432)

OS$DCN075, (466)

OS$DCN076, (500)

OS$DCN093, (566)

OS$DCN101, (601)

OS$DCN206, (760)

OS$DCN207, (794)

OS$DCN208, (828)

OS$DCN209, (862)

OS$DCN210, (896)

OS$DCN211, (930)

OS$DCN212, (964)

OS$DCN213, (998)

OS$DCN214, (1032)

OS$DCN215, (1066)

OS$DCN216, (1100)

OS$DCN217, (1134)

OS$DCN220, (1169)

OS$DC1022, (88)

OS$DC1027, (140)

OS$DC1070, (298)

OS$DC1071, (332)

OS$DC1072, (366)

OS$DC1073, (399)

OS$DC1074, (433)

OS$DC1075, (467)

OS$DC1076, (501)

OS$DC1093, (567)

OS$DC1206, (761)

OS$DC1207, (795)

OS$DC1208, (829)

OS$DC1209, (863)

OS$DC1210, (897)

OS$DC1211, (931)

OS$DC1212, (965)

OS$DC1213, (999)

OS$DC1214, (1033)

OS$DC1215, (1067)

OS$DC1216, (1101)

OS$DC1217, (1135)

OS$DEL078, (530)

OS$DIF021, (77)

OS$DMP048, (215)

OS$DMP1001, (1275)

OS$DMP1002, (1276)

OS$DMP1003, (1277)

OS$DMP1004, (1278)

OS$DMP160, (690)

OS$EXR024, (101)

OS$EXR070, (299)

OS$EXR071, (333)

OS$EXR072, (367)

OS$EXR073, (400)

OS$EXR074, (434)

OS$EXR075, (468)

OS$EXR076, (502)

OS$EXR093, (568)

OS$EXR206, (762)

OS$EXR207, (796)

OS$EXR208, (830)

OS$EXR209, (864)

OS$EXR210, (898)

OS$EXR211, (932)

OS$EXR212, (966)

OS$EXR213, (1000)

OS$EXR214, (1034)

OS$EXR215, (1068)

OS$EXR216, (1102)

OS$EXR217, (1136)

OS$FCN024, (102)

OS$FCN026, (132)

OS$FIF021, (78)

OS$FRA025, (123)

OS$FRA030, (150)

OS$FRA070, (300)

OS$FRA071, (334)

OS$FRA073, (401)

OS$FRA074, (435)

OS$FRA075, (469)

OS$FRA076, (503)

OS$FRA093, (569)

OS$FRA101, (602)

OS$FRA206, (763)

OS$FRA207, (797)

OS$FRA208, (831)

OS$FRA209, (865)

OS$FRA210, (899)

OS$FRA211, (933)

OS$FRA212, (967)

OS$FRA213, (1001)

OS$FRA214, (1035)

OS$FRA215, (1069)

OS$FRA216, (1103)

OS$FRA217, (1137)

OS$FRA220, (1170)

OS$FTN024, (103)

OS$FTN070, (301)

OS$FTN071, (335)

OS$FTN072, (368)

OS$FTN073, (402)

OS$FTN074, (436)

OS$FTN075, (470)

OS$FTN076, (504)

OS$FTN093, (570)

OS$FTN206, (764)

OS$FTN207, (798)

OS$FTN208, (832)

OS$FTN209, (866)

OS$FTN210, (900)

OS$FTN211, (934)

OS$FTN212, (968)

OS$FTN213, (1002)

OS$FTN214, (1036)

OS$FTN215, (1070)

OS$FTN216, (1104)

OS$FTN217, (1138)

OS$F10030, (151)

OS$F10106, (612)

OS$F10107, (613)

OS$F10108, (614)

OS$F10110, (616)

OS$F10111, (617)

OS$F10112, (618)

OS$HCN024, (104)

OS$HCN025, (124)

OS$HCN026, (133)

OS$HCN030, (152)

OS$HCN070, (302)

OS$HCN071, (336)

OS$HCN072, (369)

OS$HCN073, (403)

OS$HCN074, (437)

OS$HCN075, (471)

OS$HCN076, (505)

OS$HCN093, (571)

OS$HCN101, (603)

OS$HCN206, (765)

OS$HCN207, (799)

OS$HCN208, (833)

OS$HCN209, (867)

OS$HCN210, (901)

OS$HCN211, (935)

OS$HCN212, (969)

OS$HCN213, (1003)

OS$HCN214, (1037)

OS$HCN215, (1071)

OS$HCN216, (1105)

OS$HCN217, (1139)

OS$HCN220, (1171)

OS$HIF021, (79)

OS$HSM030, (153)

OS$HSM048, (216)

OS$HSM057, (250)

OS$HSM058, (263)

OS$HSM139, (649)

OS$HSM252, (1249)

OS$HSP004, (50)

OS$HSP013, (62)

OS$HSP017, (69)

OS$HSP030, (154)

OS$HSP040, (199)

OS$HSP053, (233)

OS$HSP054, (235)

OS$HSP055, (237)

OS$HSP070, (303)

OS$HSP071, (337)

OS$HSP072, (370)

OS$HSP073, (404)

OS$HSP074, (438)

OS$HSP075, (472)

OS$HSP076, (506)

OS$HSP082, (535)

OS$HSP083, (541)

OS$HSP160, (691)

OS$HSP170, (712)

OS$HSP206, (766)

OS$HSP207, (800)

OS$HSP208, (834)

OS$HSP209, (868)

OS$HSP210, (902)

OS$HSP211, (936)

OS$HSP212, (970)

OS$HSP213, (1004)

OS$HSP214, (1038)

OS$HSP215, (1072)

OS$HSP216, (1106)

OS$HSP217, (1140)

OS$HSP220, (1172)

OS$HSP225, (1181)

OS$HSP226, (1182)

OS$IAT004, (51)

OS$IAT030, (155)

OS$IAT040, (200)

OS$IAT053, (234)

OS$IAT054, (236)

OS$IAT055, (238)

OS$IAT070, (304)

OS$IAT071, (338)

OS$IAT072, (371)

OS$IAT073, (405)

OS$IAT074, (439)

OS$IAT075, (473)

OS$IAT076, (507)

OS$IAT083, (542)

OS$IAT093, (572)

OS$IAT206, (767)

OS$IAT207, (801)

OS$IAT208, (835)

OS$IAT209, (869)

OS$IAT210, (903)

OS$IAT211, (937)

OS$IAT212, (971)

OS$IAT213, (1005)

OS$IAT214, (1039)

OS$IAT215, (1073)

OS$IAT216, (1107)

OS$IAT217, (1141)

OS$ICN024, (105)

OS$ICN025, (125)

OS$ICN026, (134)

OS$ICN030, (156)

OS$ICN070, (305)

OS$ICN071, (339)

OS$ICN072, (372)

OS$ICN073, (406)

OS$ICN074, (440)

OS$ICN075, (474)

OS$ICN076, (508)

OS$ICN093, (573)

OS$ICN101, (604)

OS$ICN206, (768)

OS$ICN207, (802)

OS$ICN208, (836)

OS$ICN209, (870)

OS$ICN210, (904)

OS$ICN211, (938)

OS$ICN212, (972)

OS$ICN213, (1006)

OS$ICN214, (1040)

OS$ICN215, (1074)

OS$ICN216, (1108)

OS$ICN217, (1142)

OS$ICN220, (1173)

OS$IIF021, (80)

OS$INT004, (52)

OS$INT040, (201)

OS$INT059, (272)

OS$INT060, (274)

OS$INT061, (275)

OS$INT062, (276)

OS$INT063, (277)

OS$INT064, (278)

OS$INT065, (279)

OS$INT066, (282)

OS$INT158, (686)

OS$IPL001, (45)

OS$IPL002, (46)

OS$IPL003, (48)

OS$IPL004, (53)

OS$IPL006, (55)

OS$IPL007, (57)

OS$IPL008, (58)

OS$IPL009, (59)

OS$IPL010, (60)

OS$IPL012, (61)

OS$IPL016, (68)

OS$IPL019, (74)

OS$IPL020, (75)

OS$IPL022, (89)

OS$IPL027, (141)

OS$IPL056, (247)

OS$IPL066, (283)

OS$IPL070, (306)

OS$IPL071, (340)

OS$IPL072, (373)

OS$IPL073, (407)

OS$IPL074, (441)

OS$IPL075, (475)

OS$IPL076, (509)

OS$IPL087, (547)

OS$IPL093, (574)

OS$IPL147, (675)

OS$IPL150, (678)

OS$IPL151, (679)

OS$IPL161, (702)

OS$IPL163, (703)

OS$IPL165, (704)

OS$IPL191, (738)

OS$IPL203, (752)

OS$IPL206, (769)

OS$IPL207, (803)

OS$IPL208, (837)

OS$IPL209, (871)

OS$IPL210, (905)

OS$IPL211, (939)

OS$IPL212, (973)

OS$IPL213, (1007)

OS$IPL214, (1041)

OS$IPL215, (1075)

OS$IPL216, (1109)

OS$IPL217, (1143)

OS$IPL219, (1165)

OS$IPL220, (1174)

OS$IPL237, (1195)

OS$IPL238, (1196)

OS$IPL239, (1197)

OS$IPL240, (1198)

OS$ISP030, (157)

OS$ISP048, (217)

OS$ISP057, (251)

OS$ISP058, (264)

OS$ISP139, (650)

OS$ISP252, (1250)

OS$JS2030, (158)

OS$JS2057, (252)

OS$JS2058, (265)

OS$JS2066, (284)

OS$JS2070, (307)

OS$JS2071, (341)

OS$JS2072, (374)

OS$JS2073, (408)

OS$JS2074, (442)

OS$JS2075, (476)

OS$JS2076, (510)

OS$JS2086, (545)

OS$JS2087, (548)

OS$JS2088, (552)

OS$JS2093, (575)

OS$JS2139, (651)

OS$JS2167, (707)

OS$JS2168, (710)

OS$JS2170, (713)

OS$JS2197, (745)

OS$JS2206, (770)

OS$JS2207, (804)

OS$JS2208, (838)

OS$JS2209, (872)

OS$JS2210, (906)

OS$JS2211, (940)

OS$JS2212, (974)

OS$JS2213, (1008)

OS$JS2214, (1042)

OS$JS2215, (1076)

OS$JS2216, (1110)

OS$JS2217, (1144)

OS$JS2228, (1186)

OS$JS2241, (1199)

OS$JS2252, (1251)

OS$JS3030, (159)

OS$JS3048, (219)

OS$JS3057, (253)

OS$JS3058, (266)

OS$JS3139, (652)

OS$JS3252, (1252)

OS$J2#048, (218)

OS$J2I021, (81)

OS$J2I030, (160)

OS$J2J082, (536)

OS$J2M023, (93)

OS$J2M024, (106)

OS$J2M030, (161)

OS$J2M070, (308)

OS$J2M071, (342)

OS$J2M072, (375)

OS$J2M073, (409)

OS$J2M074, (443)

OS$J2M075, (477)

OS$J2M076, (511)

OS$J2M089, (553)

OS$J2M091, (556)

OS$J2M092, (559)

OS$J2M093, (576)

OS$J2M206, (771)

OS$J2M207, (805)

OS$J2M208, (839)

OS$J2M209, (873)

OS$J2M210, (907)

OS$J2M211, (941)

OS$J2M212, (975)

OS$J2M213, (1009)

OS$J2M214, (1043)

OS$J2M215, (1077)

OS$J2M216, (1111)

OS$J2M217, (1145)

OS$J2R024, (107)

OS$J2R070, (309)

OS$J2R071, (343)

OS$J2R072, (376)

OS$J2R073, (410)

OS$J2R074, (444)

OS$J2R075, (478)

OS$J2R076, (512)

OS$J2R090, (555)

OS$J2R093, (577)

OS$J2R206, (772)

OS$J2R207, (806)

OS$J2R208, (840)

OS$J2R209, (874)

OS$J2R210, (908)

OS$J2R211, (942)

OS$J2R212, (976)

OS$J2R213, (1010)

OS$J2R214, (1044)

OS$J2R215, (1078)

OS$J2R216, (1112)

OS$J2R217, (1146)

OS$J2S023, (94)

OS$J2S024, (108)

OS$J2S030, (162)

OS$J2S070, (310)

OS$J2S071, (344)

OS$J2S072, (377)

OS$J2S073, (411)

OS$J2S074, (445)

OS$J2S075, (479)

OS$J2S076, (513)

OS$J2S089, (554)

OS$J2S091, (557)

OS$J2S092, (560)

OS$J2S093, (578)

OS$J2S206, (773)

OS$J2S207, (807)

OS$J2S208, (841)

OS$J2S209, (875)

OS$J2S210, (909)

OS$J2S211, (943)

OS$J2S212, (977)

OS$J2S213, (1011)

OS$J2S214, (1045)

OS$J2S215, (1079)

OS$J2S216, (1113)

OS$J2S217, (1147)

OS$J3E024, (109)

OS$J3E025, (126)

OS$J3E026, (135)

OS$J3E030, (163)

OS$J3E070, (311)

OS$J3E071, (345)

OS$J3E072, (378)

OS$J3E073, (412)

OS$J3E074, (446)

OS$J3E075, (480)

OS$J3E076, (514)

OS$J3E093, (579)

OS$J3E102, (608)

OS$J3E166, (705)

OS$J3E206, (774)

OS$J3E207, (808)

OS$J3E208, (842)

OS$J3E209, (876)

OS$J3E210, (910)

OS$J3E211, (944)

OS$J3E212, (978)

OS$J3E213, (1012)

OS$J3E214, (1046)

OS$J3E215, (1080)

OS$J3E216, (1114)

OS$J3E217, (1148)

OS$J3I021, (82)

OS$J3I030, (164)

OS$J3S024, (110)

OS$J3S030, (165)

OS$J3S070, (312)

OS$J3S071, (346)

OS$J3S072, (379)

OS$J3S073, (413)

OS$J3S074, (447)

OS$J3S075, (481)

OS$J3S076, (515)

OS$J3S093, (580)

OS$J3S113, (619)

OS$J3S206, (775)

OS$J3S207, (809)

OS$J3S208, (843)

OS$J3S209, (877)

OS$J3S210, (911)

OS$J3S211, (945)

OS$J3S212, (979)

OS$J3S213, (1013)

OS$J3S214, (1047)

OS$J3S215, (1081)

OS$J3S216, (1115)

OS$J3S217, (1149)

OS$LIM033, (190)

OS$LIM034, (191)

OS$LOD013, (63)

OS$LOD014, (66)

OS$LOD015, (67)

OS$LOD017, (70)

OS$LOD018, (73)

OS$LOD066, (285)

OS$LOD077, (529)

OS$LOD079, (531)

OS$LOD080, (532)

OS$LOD081, (533)

OS$LOD082, (537)

OS$LOD171, (715)

OS$LOD198, (747)

OS$LOD202, (751)

OS$LOD267, (1274)

OS$LOK024, (111)

OS$LOK029, (144)

OS$LOK070, (313)

OS$LOK071, (347)

OS$LOK072, (380)

OS$LOK073, (414)

OS$LOK074, (448)

OS$LOK075, (482)

OS$LOK076, (516)

OS$LOK093, (581)

OS$LOK206, (776)

OS$LOK207, (810)

OS$LOK208, (844)

OS$LOK209, (878)

OS$LOK210, (912)

OS$LOK211, (946)

OS$LOK212, (980)

OS$LOK213, (1014)

OS$LOK214, (1048)

OS$LOK215, (1082)

OS$LOK216, (1116)

OS$LOK217, (1150)

OS$MIS030, (166)

OS$MIS048, (220)

OS$MIS057, (254)

OS$MIS058, (267)

OS$MIS139, (653)

OS$MIS252, (1253)

OS$NUL035, (192)

OS$PRE123, (629)

OS$PRE124, (630)

OS$PRE125, (631)

OS$PRE126, (632)

OS$PRE127, (633)

OS$PRE128, (634)

OS$PRE129, (635)

OS$PRE130, (636)

OS$PRE131, (637)

OS$PRE132, (638)

OS$PRE133, (639)

OS$PRE134, (640)

OS$PRE135, (641)

OS$PRE136, (642)

OS$PRE137, (643)

OS$PRE138, (644)

OS$QRY048, (221)

OS$QRY087, (550)

OS$RAC030, (167)

OS$RAC048, (222)

OS$RAC057, (255)

OS$RAC058, (268)

OS$RAC139, (654)

OS$RAC252, (1254)

OS$RCN024, (112)

OS$RCN025, (127)

OS$RCN026, (136)

OS$RCN030, (168)

OS$RCN070, (314)

OS$RCN071, (348)

OS$RCN072, (381)

OS$RCN073, (415)

OS$RCN074, (449)

OS$RCN075, (483)

OS$RCN076, (517)

OS$RCN093, (582)

OS$RCN101, (605)

OS$RCN206, (777)

OS$RCN207, (811)

OS$RCN208, (845)

OS$RCN209, (879)

OS$RCN210, (913)

OS$RCN211, (947)

OS$RCN212, (981)

OS$RCN213, (1015)

OS$RCN214, (1049)

OS$RCN215, (1083)

OS$RCN216, (1117)

OS$RCN217, (1151)

OS$RCN220, (1175)

OS$RC2030, (169)

OS$RD1030, (170)

OS$RD1144, (661)

OS$RD1145, (662)

OS$REL030, (171)

OS$REL046, (209)

OS$REL048, (223)

OS$REL057, (256)

OS$REL082, (538)

OS$REL084, (543)

OS$REL085, (544)

OS$REL104, (610)

OS$REL154, (682)

OS$REL155, (683)

OS$REL160, (692)

OS$REL170, (714)

OS$REL171, (716)

OS$REL196, (744)

OS$REL197, (746)

OS$REL204, (753)

OS$REL205, (754)

OS$REL229, (1187)

OS$REL236, (1194)

OS$RIF021, (83)

OS$SAF030, (172)

OS$SAF048, (224)

OS$SAF057, (257)

OS$SAF058, (269)

OS$SAF139, (655)

OS$SAF252, (1255)

OS$SCH030, (173)

OS$SCN024, (113)

OS$SCN025, (128)

OS$SCN026, (137)

OS$SCN030, (174)

OS$SCN070, (315)

OS$SCN071, (349)

OS$SCN072, (382)

OS$SCN073, (416)

OS$SCN074, (450)

OS$SCN075, (484)

OS$SCN076, (518)

OS$SCN093, (583)

OS$SCN101, (606)

OS$SCN206, (778)

OS$SCN207, (812)

OS$SCN208, (846)

OS$SCN209, (880)

OS$SCN210, (914)

OS$SCN211, (948)

OS$SCN212, (982)

OS$SCN213, (1016)

OS$SCN214, (1050)

OS$SCN215, (1084)

OS$SCN216, (1118)

OS$SCN217, (1152)

OS$SCN220, (1176)

OS$SIF021, (84)

OS$SMF030, (175)

OS$SMF048, (225)

OS$SMF057, (258)

OS$SMF058, (270)

OS$SMF139, (656)

OS$SMF252, (1256)

OS$STM048, (226)

OS$STM265, (1272)

OS$SVU006, (56)

OS$SVU048, (227)

OS$SVU156, (684)

OS$S19013, (64)

OS$S19017, (71)

OS$S19194, (742)

OS$S22013, (65)

OS$S22017, (72)

OS$S22194, (743)

OS$TCN024, (114)

OS$TCN025, (129)

OS$TCN026, (138)

OS$TCN030, (176)

OS$TCN070, (316)

OS$TCN071, (350)

OS$TCN072, (383)

OS$TCN073, (417)

OS$TCN074, (451)

OS$TCN075, (485)

OS$TCN076, (519)

OS$TCN093, (584)

OS$TCN101, (607)

OS$TCN206, (779)

OS$TCN207, (813)

OS$TCN208, (847)

OS$TCN209, (881)

OS$TCN210, (915)

OS$TCN211, (949)

OS$TCN212, (983)

OS$TCN213, (1017)

OS$TCN214, (1051)

OS$TCN215, (1085)

OS$TCN216, (1119)

OS$TCN217, (1153)

OS$TCN220, (1177)

OS$TEX261, (1268)

OS$TEX262, (1269)

OS$TEX263, (1270)

OS$THI022, (90)

OS$THI093, (585)

OS$TIF021, (85)

OS$TPS004, (54)

OS$TPS022, (91)

OS$TPS027, (142)

OS$TPS040, (202)

OS$TPS057, (259)

OS$TPS059, (273)

OS$TPS066, (286)

OS$TPS070, (317)

OS$TPS071, (351)

OS$TPS072, (384)

OS$TPS073, (418)

OS$TPS074, (452)

OS$TPS075, (486)

OS$TPS076, (520)

OS$TPS087, (551)

OS$TPS093, (586)

OS$TPS160, (693)

OS$TPS167, (708)

OS$TPS172, (717)

OS$TPS176, (721)

OS$TPS177, (722)

OS$TPS179, (725)

OS$TPS180, (726)

OS$TPS181, (727)

OS$TPS182, (728)

OS$TPS183, (730)

OS$TPS184, (731)

OS$TPS186, (733)

OS$TPS187, (734)

OS$TPS206, (780)

OS$TPS207, (814)

OS$TPS208, (848)

OS$TPS209, (882)

OS$TPS210, (916)

OS$TPS211, (950)

OS$TPS212, (984)

OS$TPS213, (1018)

OS$TPS214, (1052)

OS$TPS215, (1086)

OS$TPS216, (1120)

OS$TPS217, (1154)

OS$TSO030, (177)

OS$TSO048, (228)

OS$TSO057, (260)

OS$TSO058, (271)

OS$TSO139, (657)

OS$TSO252, (1257)

OS$UJI024, (115)

OS$UJI030, (178)

OS$UJI036, (193)

OS$UJI070, (318)

OS$UJI071, (352)

OS$UJI072, (385)

OS$UJI073, (419)

OS$UJI074, (453)

OS$UJI075, (487)

OS$UJI076, (521)

OS$UJI093, (587)

OS$UJI122, (628)

OS$UJI206, (781)

OS$UJI207, (815)

OS$UJI208, (849)

OS$UJI209, (883)

OS$UJI210, (917)

OS$UJI211, (951)

OS$UJI212, (985)

OS$UJI213, (1019)

OS$UJI214, (1053)

OS$UJI215, (1087)

OS$UJI216, (1121)

OS$UJI217, (1155)

OS$USI022, (92)

OS$USI024, (116)

OS$USI030, (179)

OS$USI070, (319)

OS$USI071, (353)

OS$USI072, (386)

OS$USI073, (420)

OS$USI074, (454)

OS$USI075, (488)

OS$USI076, (522)

OS$USI093, (588)

OS$USI206, (782)

OS$USI207, (816)

OS$USI208, (850)

OS$USI209, (884)

OS$USI210, (918)

OS$USI211, (952)

OS$USI212, (986)

OS$USI213, (1020)

OS$USI214, (1054)

OS$USI215, (1088)

OS$USI216, (1122)

OS$USI217, (1156)

OS$USI232, (1189)

OS$USO030, (180)

OS$USO149, (677)

OS$USO152, (680)

OS$UTL030, (181)

OS$UTL114, (620)

OS$UTL115, (621)

OS$UTL116, (622)

OS$UTL117, (623)

OS$UTL118, (624)

OS$UTL119, (625)

OS$UTL120, (626)

OS$UTL193, (741)

OS$UXA201, (750)

OS$UXW199, (748)

OS$UXW200, (749)

OS$VCN024, (117)

OS$VCN030, (182)

OS$VCN067, (290)

OS$VCN069, (291)

OS$VCN070, (320)

OS$VCN071, (354)

OS$VCN072, (387)

OS$VCN073, (421)

OS$VCN074, (455)

OS$VCN075, (489)

OS$VCN076, (523)

OS$VCN093, (589)

OS$VCN206, (783)

OS$VCN207, (817)

OS$VCN208, (851)

OS$VCN209, (885)

OS$VCN210, (919)

OS$VCN211, (953)

OS$VCN212, (987)

OS$VCN213, (1021)

OS$VCN214, (1055)

OS$VCN215, (1089)

OS$VCN216, (1123)

OS$VCN217, (1157)

OS$WTO037, (194)

OS$W21039, (197)

OS$W21066, (287)

OS$W21160, (694)

OS$W21191, (739)

OS$W21192, (740)

OS$xxx000, (44)

OS$X00021, (86)

OS$X00030, (183)

OS$X00069, (711)

OS$X00082, (539)

OS$X00227, (1184)

OS$X02109, (615)

OS$X02146, (663)

OS$X04146, (664)

OS$X05023, (95)

OS$X05024, (118)

OS$X05070, (321)

OS$X05071, (355)

OS$X05072, (388)

OS$X05073, (422)

OS$X05074, (456)

OS$X05075, (490)

OS$X05076, (524)

OS$X05093, (590)

OS$X05146, (665)

OS$X05206, (784)

OS$X05207, (818)

OS$X05208, (852)

OS$X05209, (886)

OS$X05210, (920)

OS$X05211, (954)

OS$X05212, (988)

OS$X05213, (1022)

OS$X05214, (1056)

OS$X05215, (1090)

OS$X05216, (1124)

OS$X05217, (1158)

OS$X06030, (184)

OS$X06100, (599)

OS$X06146, (666)

OS$X06148, (676)

OS$X06219, (1166)

OS$X06222, (1178)

OS$X06230, (1188)

OS$X06234, (1192)

OS$X09030, (185)

OS$X09223, (1179)

OS$X09224, (1180)

OS$X24055, (246)

OS$X24146, (667)

OS$X24226, (1183)

OS$X24244, (1217)

OS$X24245, (1225)

OS$X32146, (668)

OS$X32153, (681)

OS$X32160, (695)

OS$X32249, (1235)

OS$X44146, (669)

OS$X44219, (1167)

OS$X49030, (186)

OS$X49249, (1236)

OS$02F027, (143)

OS$02F070, (322)

OS$02F071, (356)

OS$02F072, (389)

OS$02F073, (423)

OS$02F074, (457)

OS$02F075, (491)

OS$02F076, (525)

OS$02F091, (558)

OS$02F093, (592)

OS$02F103, (609)

OS$02F206, (785)

OS$02F207, (819)

OS$02F208, (853)

OS$02F209, (887)

OS$02F210, (921)

OS$02F211, (955)

OS$02F212, (989)

OS$02F213, (1023)

OS$02F214, (1057)

OS$02F215, (1091)

OS$02F216, (1125)

OS$02F217, (1159)

OS$1PL070, (323)

OS$1PL071, (357)

OS$1PL072, (390)

OS$1PL073, (424)

OS$1PL074, (458)

OS$1PL075, (492)

OS$1PL076, (526)

OS$1PL093, (591)

OS$1PL206, (786)

OS$1PL207, (820)

OS$1PL208, (854)

OS$1PL209, (888)

OS$1PL210, (922)

OS$1PL211, (956)

OS$1PL212, (990)

OS$1PL213, (1024)

OS$1PL214, (1058)

OS$1PL215, (1092)

OS$1PL216, (1126)

OS$1PL217, (1160)

OS$2DM249, (1237)

OS$2DM250, (1238)

OS$2D0055, (239)

OS$2D0242, (1200)

OS$2D0243, (1204)

OS$2D0244, (1210)

OS$2D0245, (1218)

OS$2D0250, (1239)

OS$2D0260, (1264)

OS$2D1246, (1226)

OS$2D1247, (1230)

OS$2D3254, (1259)

OS$2D3256, (1261)

OS$2G2160, (696)

OS$2G3146, (670)

OS$2G3160, (697)

OS$2G4160, (698)

OS$2HM250, (1240)

OS$2HM251, (1246)

OS$2H0055, (240)

OS$2H0146, (671)

OS$2H0242, (1201)

OS$2H0243, (1205)

OS$2H0244, (1211)

OS$2H0245, (1219)

OS$2H0250, (1241)

OS$2H0260, (1265)

OS$2H1246, (1227)

OS$2H1247, (1231)

OS$2H3253, (1258)

OS$2H4055, (241)

OS$2H4243, (1206)

OS$2H4244, (1212)

OS$2H4245, (1220)

OS$2H5070, (324)

OS$2H5071, (358)

OS$2H5072, (391)

OS$2H5073, (425)

OS$2H5074, (459)

OS$2H5075, (493)

OS$2H5076, (527)

OS$2H5093, (593)

OS$2H5206, (787)

OS$2H5207, (821)

OS$2H5208, (855)

OS$2H5209, (889)

OS$2H5210, (923)

OS$2H5211, (957)

OS$2H5212, (991)

OS$2H5213, (1025)

OS$2H5214, (1059)

OS$2H5215, (1093)

OS$2H5216, (1127)

OS$2H5217, (1161)

OS$2LM250, (1242)

OS$2LM264, (1271)

OS$2L0055, (242)

OS$2L0146, (672)

OS$2L0242, (1202)

OS$2L0244, (1213)

OS$2L0245, (1221)

OS$2L0250, (1243)

OS$2L0260, (1266)

OS$2L1246, (1228)

OS$2L1247, (1232)

OS$2L4055, (243)

OS$2L4243, (1207)

OS$2L4244, (1214)

OS$2L4245, (1222)

OS$2MM146, (673)

OS$2MM250, (1244)

OS$2M0055, (244)

OS$2M0066, (288)

OS$2M0087, (549)

OS$2M0242, (1203)

OS$2M0243, (1208)

OS$2M0244, (1215)

OS$2M0245, (1223)

OS$2M0250, (1245)

OS$2M0260, (1267)

OS$2M1066, (289)

OS$2M1246, (1229)

OS$2M1247, (1233)

OS$2M3146, (674)

OS$2M4055, (245)

OS$2M4243, (1209)

OS$2M4244, (1216)

OS$2M4245, (1224)

OS$2P1159, (687)

OS$2P1160, (699)

OS$2P2159, (688)

OS$2P3160, (700)

OS$2P4023, (96)

OS$2P4024, (119), (120)

OS$2P4030, (187)

OS$2P4070, (325)

OS$2P4071, (359)

OS$2P4072, (392)

OS$2P4073, (426)

OS$2P4074, (460)

OS$2P4075, (494)

OS$2P4076, (528)

OS$2P4206, (788)

OS$2P4207, (822)

OS$2P4208, (856)

OS$2P4209, (890)

OS$2P4210, (924)

OS$2P4211, (958)

OS$2P4212, (992)

OS$2P4213, (1026)

OS$2P4214, (1060)

OS$2P4215, (1094)

OS$2P4216, (1128)

OS$2P4217, (1162)

OS$2S0160, (701)

OS$2S0167, (709)

OS$2S0266, (1273)

OS$2TP082, (540)

OS$2TP227, (1185)

OS$2TP235, (1193)

OS$2TP258, (1262)

OS$285I, (39)

SYSLOG Message Format, (41)

System Code Format, (6)

TSO Message Format, (42)

System Codes

AFF-0000, (9)

AFF-0004, (12)

AFF-0008, (15)

AFF-0012, (18)

AFF-0016, (21)

AFF-0020, (24)

AFF-0024, (27)

AFF-0028, (31)

AFF-0032, (33)

AFF-0036, (36)

Format, (4)

User Completion Code, (7)

Readers's Comment Form

The success of this manual depends solely on its usefulness to you. To ensure such usefulness, we solicit your comments concerning the clarity, accuracy, completeness, and organization of this manual. Please enter your comments below and mail this form to the address on the front page of this manual. If you wish a reply, give your name, company, and mailing address. We would also appreciate an indication of your occupation and how you use this manual.

Please rate this manual on the following points:

accurate 1 2 3 4 5 inaccurate readable 1 2 3 4 5 unreadable well laid out 1 2 3 4 5 badly laid out well organized 1 2 3 4 5 badly organized easy to understand 1 2 3 4 5 incomprehensible has enough examples 1 2 3 4 5 has too few examples

Thank you for your time and effort.