DATE: May 20, 2010
Table of Contents
3.0 Determine the Current Microcode Levels:
=====================================================================================
SA61 |
This is the original f/w level for this drive |
For support:
·
AIX 5.3 with the 5300-07 Technology
Level and Service Pack 9, or later
·
AIX 5.3 with the 5300-08 Technology
Level and Service Pack 7, or later
·
AIX 5.3 with the 5300-09 Technology
Level and Service Pack 4, or later
·
AIX 5.3 with the 5300-10 Technology
Level, or later
·
AIX 6.1 with the 6100-00 Technology
Level and Service Pack 9, or later
·
AIX 6.1 with the 6100-01 Technology
Level and Service Pack 5, or later
·
AIX 6.1 with the 6100-02 Technology
Level and Service Pack 4, or later
·
AIX 6.1 with the 6100-03 Technology
Level, or later
Before you install the microcode, it is important to determine the microcode level of the Drive installed on the target system. Use the following instructions to read the Microcode Level.
1) List the optical
drives attached to the target systems by typing:
lsdev -Cc cdrom
2) To check the current
microcode level for the optical drive, enter the following command
lscfg -vl
cdX
Where X is the number associated with the optical drive listed as
available in step 1.
Results of command:
# lscfg -vl
cd0
cd0
Manufacturer................IBM
Machine Type and Model......RMBO0040542
ROS Level and ID............SA61
Device Specific.(Z0)........058002028F000030
Part Number.................46K6189
EC Level....................N23396
FRU Number..................44V4220
Hardware Location Code......U7214.1U2.7000049-P1-C1-D1