IBM 64-bit SDK for Windows platforms, Java Technology Edition
SDK and Runtime Guide
Version 5 Release 0This documentation applies to IBM 64-bit SDK for Windows, v5.0 releases before SR 13. For new or changed information about IBM 64-bit SDK for Windows, v5.0 SR 13 and newer, see IBM 64-bit SDK for Windows, v5.0: Current news.
Before using this information and the product it supports, read the information in Notices.
This edition of the user guide applies to the IBM 64-bit SDK for Windows on AMD64/EM64T architecture, Java 2 Technology Edition, Version 5.0, and to all subsequent releases, modifications, and Service Refreshes, until otherwise indicated in new editions.
© Copyright 1997, 2011, Oracle and/or its affiliates. All rights reserved.
US Government Users Restricted Rights -- Use, duplication or disclosure restricted by GSA ADP Schedule Contract with IBM Corp.
Contents
Preface
This user guide provides general information about the IBM® 64-bit SDK and Runtime Environment for Windows on AMD64/EM64T architecture, Java 2 Technology Edition, Version 5.0. The user guide gives specific information about any differences in the IBM implementation compared with the Oracle implementation.
Read this user guide with the more extensive documentation on the Oracle Web site: http://www.oracle.com/technetwork/java/index.html.
The Diagnostics Guide provides more detailed information about the IBM Virtual Machine for Java.
This user guide is part of a release and is applicable only to that particular release. Make sure that you have the user guide appropriate to the release you are using.
The terms "Runtime Environment" and "Java Virtual Machine" are used interchangeably throughout this user guide.
Technical changes made for this version
of the user guide, other than minor or obvious
ones, are indicated by blue chevrons when viewing in an Information
Center, by blue chevrons and in red when viewing in HTML, or by vertical
bars to the left of the changes when viewing as a PDF file.
The Program Code is not designed or intended for use in real-time applications such as (but not limited to) the online control of aircraft, air traffic, aircraft navigation, or aircraft communications; or in the design, construction, operation, or maintenance of any nuclear facility.
Overview
The IBM SDK is a development environment for writing and running applets and applications that conform to the Java 5.0 Core Application Program Interface (API).
The SDK includes the Runtime Environment for Windows, which enables you only to run Java applications. If you have installed the SDK, the Runtime Environment is included.
The Runtime Environment contains the Java Virtual Machine and supporting files including class files. The Runtime Environment contains only a subset of the classes that are found in the SDK and allows you to support a Java program at runtime but does not provide compilation of Java programs. The Runtime Environment for Windows does not include any of the development tools, for example appletviewer.exe or the Java compiler (javac.exe), or classes that are only for development systems.
In addition, the Java Communications application programming interface (API) package is provided for use with the Runtime Environment for Windows. You can find information about it in Java Communications API (JavaComm).
Version compatibility
In general, any applet or application that ran with a previous version of the SDK should run correctly with the IBM 64-bit SDK for Windows, v5.0. Classes compiled with this release are not guaranteed to work on previous releases.
For information about compatibility issues between releases, see the Oracle Web site at:
http://www.oracle.com/technetwork/java/javase/compatibility-137462.html
http://www.oracle.com/technetwork/java/javase/compatibility-j2se1-141394.html
http://www.oracle.com/technetwork/java/javase/compatibility-135119.html
If you are using the SDK as part of another product (for example, IBM WebSphere® Application Server), and you upgrade from a previous level of the SDK, perhaps v1.4.2, serialized classes might not be compatible. However, classes are compatible between service refreshes.
Migrating from other IBM JVMs
From Version 1.4.2, the IBM Runtime Environment for Windows contains a new version of the IBM Virtual Machine for Java and the Just-In-Time (JIT) compiler.
If you are migrating from an older IBM Runtime Environment, note that:
- To remain compatible with Version 1.4.2, the JVM dynamic link library jvm.dll is installed in both jre\bin\j9vm and jre\bin\classic. Set the LIBPATH environment variable to use the JVM dynamic link library in jre\bin\classic when writing native applications using the JNI invocation interface.
- The JVM Monitoring Interface (JVMMI) is no longer available. You must rewrite applications that used that API. You are recommended to use the JVM Tool Interface (JVMTI) instead. The JVMTI is not functionally the equivalent of JVMMI. For information about JVMTI, see http://download.oracle.com/javase/1.5.0/docs/guide/jvmti/ and the Diagnostics Guide.
- The new implementation of JNI conforms to the JNI specification, but differs from the old implementation. It returns copies of objects rather than pinning the objects. This difference can expose errors in JNI application code. For information about debugging JNI code, see -Xcheck:jni in JVM command-line options.
- The format and content of garbage collector verbose logs obtained using -verbose:gc have changed. The data is now formatted as XML. The data content reflects the changes to the implementation of garbage collection in the JVM, and most of the statistics that are produced have changed. You must change any programs that process the verbose GC data to make them work with the new format and data. See the Diagnostics Guide for an example of the new verbose GC data.
- SDK 1.4 versions of the IBM JRE included JVM specific classes in a file called core.jar. From Java 5.0 onwards, these are included in a file called vm.jar.
- Earlier versions of the IBM JRE included a file called rt.jar in the jre/lib directory. From Java v1.4 onwards, this file has been replaced by multiple JAR files in the jre/lib directory.
- For additional industry compatibility information, see Oracle's Java 5 Compatibility Documentation: http://www.oracle.com/technetwork/java/javase/compatibility-137462.html
- For additional deprecated API information, see Oracle's Java 5 Deprecated API List: http://download.oracle.com/javase/1.5.0/docs/api/deprecated-list.html
- Tracing class dependencies, started using -verbose:Xclassdep, is not supported. If you specify -verbose:Xclassdep, the JVM will issue an error message and will not start.
- The JVM detects the operating system locale and sets the language preferences accordingly. For example, if the locale is set to fr_FR, JVM messages will be printed in French. To avoid seeing JVM messages in the language of the detected locale, remove the file $SDK/jre/bin/java_xx.properties where xx is the locale, such as fr, and the JVM will print messages in English.
Supported environments
The IBM 64-bit SDK for Windows, v5.0 is supported on certain hardware platforms and operating systems, and is tested on specific virtualization environments.
Hardware platform
The 64-bit SDK for Windows runs on hardware that supports the AMD64 or EM64T architecture.
Operating system
The following table details the operating system supported for the IBM 64-bit SDK for Windows, v5.0. The table indicates whether support for an operating system release was included at the "general availability" (GA) date for the SDK, or at a specific service refresh (SR) level.
Operating system | SDK release supported |
---|---|
Windows XP | GA |
Windows Vista | SR4 |
Windows 7 | SR11 |
Windows Server 2003 | GA |
Windows Server 2008 | SR7 |
Windows Server 2008 R2 | SR11 |
Virtualization software
For information about the virtualization software tested for IBM 64-bit SDK for Windows, v5.0, see Appendix D. Support for virtualization software.
Contents of the SDK and Runtime Environment
The SDK contains several development tools and a Java Runtime Environment (JRE). This section describes the contents of the SDK tools and the Runtime Environment.
Applications written entirely in Java must have no dependencies on the IBM SDK's directory structure (or files in those directories). Any dependency on the SDK's directory structure (or the files in those directories) might result in application portability problems.
The user guides, Javadoc files, demo files, and the accompanying license and copyright files are the only documentation included in this SDK for Windows. You can view Oracle's software documentation by visiting the Oracle Web site, or you can download Oracle's software documentation package from the Oracle Web site: http://www.oracle.com/technetwork/java/index.html.
Contents of the Runtime Environment
A list of classes, tools, and other files that you can use with the standard Runtime Environment.
- Core Classes - These classes are the compiled class files for the platform and must remain compressed for the compiler and interpreter to access them. Do not modify these classes; instead, create subclasses and override where you need to.
- Trusted root certificates from certificate signing authorities - These certificates are used to validate the identity of signed material.
- JRE tools - The following tools are part of the Runtime Environment and are in the C:\Program Files\IBM\Java50\jre\bin directory unless
otherwise specified.
- ikeyman.exe (iKeyman GUI utility)
- Allows you to manage keys, certificates, and certificate requests. For more information see the accompanying Security Guide and http://public.dhe.ibm.com/software/dw/jdk/security/50/GSK7c_SSL_IKM_Guide.pdf. The SDK also provides a command-line version of this utility.
- jaaslogon.exe
- A Windows service that enables JAAS Active Login applications to change their effective user at run time using the JAAS Active Login API.
- java.exe (Java Interpreter)
- Runs Java classes. The Java Interpreter runs programs that are written in the Java programming language.
- javaw.exe (Java Interpreter)
- Runs Java classes in the same way as the java command does, but does not use a console window.
- jextract.exe (Dump extractor)
- Converts a system-produced dump into a common format that can be used by jdmpview. For more information, see jdmpview.
- keytool.exe (Key and Certificate Management Tool)
- Manages a keystore (database) of private keys and their associated X.509 certificate chains that authenticate the corresponding public keys.
- policytool.exe (Policy File Creation and Management Tool)
- Creates and modifies the external policy configuration files that define your installation's Java security policy.
- rmid.exe (RMI activation system daemon)
- Starts the activation system daemon so that objects can be registered and activated in a Java virtual machine (JVM).
- rmiregistry.exe (Java remote object registry)
- Creates and starts a remote object registry on the specified port of the current host.
- tnameserv.exe (Common Object Request Broker Architecture (CORBA) transient naming service)
- Starts the CORBA transient naming service.
Contents of the SDK
A list of tools and reference information that is included with the standard SDK.
- The following tools are part of the SDK and are located in the C:\Program Files\IBM\Java50\bin directory:
-
- appletviewer.exe (Java Applet Viewer)
- Tests and runs applets outside a Web browser.
- apt.exe (Annotation Processing Tool)
- Finds and executes annotation processors based on the annotations present in the set of specified source files being examined.
- extcheck.exe (Extcheck utility)
- Detects version conflicts between a target jar file and currently-installed extension jar files.
- idlj.exe (IDL to Java Compiler)
- Generates Java bindings from a given IDL file.
- jar.exe (Java Archive Tool)
- Combines multiple files into a single Java Archive (JAR) file.
- jarsigner.exe (JAR Signing and Verification Tool)
- Generates signatures for JAR files and verifies the signatures of signed JAR files.
- javac.exe (Java Compiler)
- Compiles programs that are written in the Java programming language into bytecodes (compiled Java code).
- javadoc.exe (Java Documentation Generator)
- Generates HTML pages of API documentation from Java source files.
- javah.exe (C Header and Stub File Generator)
- Enables you to associate native methods with code written in the Java programming language.
- javap.exe (Class File Disassembler)
- Disassembles compiled files and can print a representation of the bytecodes.
- jconsole.exe (JConsole Monitoring and Management Tool)
- Experimental (unsupported). Monitors local and remote JVMs using a GUI. JMX-compliant.
- jdb.exe (Java Debugger)
- Helps debug your Java programs.
- jdmpview.exe (Cross-platform dump formatter)
- Analyzes dumps. For more information, see the Diagnostics Guide.
- native2ascii.exe (Native-To-ASCII Converter)
- Converts a native encoding file to an ASCII file that contains characters encoded in either Latin-1 or Unicode, or both.
- rmic.exe (Java Remote Method Invocation (RMI) Stub Converter)
- Generates stubs, skeletons, and ties for remote objects. Includes RMI over Internet Inter-ORB Protocol (RMI-IIOP) support.
- serialver.exe (Serial Version Command)
- Returns the serialVersionUID for one or more classes in a format that is suitable for copying into an evolving class.
- Include Files
- C headers for JNI programs.
- copyright
- The copyright notice for the SDK for Windows software.
- License
-
The License file, C:\Program Files\IBM\Java50\license, contains the license agreement for the SDK for Windows software. To view or print the license agreement, open the file in a Web browser.
- fixes.lst
- A text file that describes any defects that are fixed after the initial release of this version.
Installing and configuring the SDK and Runtime Environment
Use the installation wizard or the compressed file to install the SDK. Configure the SDK using environment variables, command-line options, and properties files.
Before you install
To install the SDK or the Runtime Environment package, download the relevant installation package. Ensure that you download all packages to the same directory and that there is enough space in your temporary directory.
The packages and their file names are listed in Installing the packages; do not change the packages' file names.
Before you begin to install, ensure that there is enough space in your C:\WINDOWS\TEMP directory to use during installation. The amount of temporary space required in the TEMP directory during installation is:
- SDK installable package: 130 MB
- Runtime Environment installable package: 85 MB
If you do not have enough temporary space, the installation program generates an error and terminates the installation. If you do have enough temporary space but still see this message, verify that the packages you are attempting to install were downloaded completely. You can do this by comparing the file sizes of your packages to the file sizes shown on the Web pages from which you downloaded the packages.
If Service Refresh 6 or earlier is installed in a non-English locale, and you are migrating to Service Refresh 7 or later, you must uninstall the earlier SDK or runtime, before installing the later SDK or runtime. If you do not do this uninstall, the following error is displayed:
Error applying transforms. Verify that the specified transform paths are valid. C:\Windows\Installer\xxxx
where xxxx represents the path.
Installing the packages
There are many packages you can install independently, including the SDK, the Runtime Environment, Javacomm, documentation, and demos.
The packages you can install are:
- SDK installable package: ibm-java2-sdk-50-win-x86_64.exe
- Runtime Environment installable package: ibm-java2-jre-50-win-x86_64.exe
Other packages are provided as compressed files:
- Runtime Environment package: ibm-java2-jre-50-win-x86_64.zip
- SDK package: ibm-java2-sdk-50-win-x86_64.zip
- Java Communications Application Programming Interface (API) for Windows package: ibm-java2-javacomm-50-win-x86_64.zip. See the section Installing Java Communications API from a compressed file for installation instructions.
- Documentation package: ibm-java2-docs-50-win-x86_64.zip
- Demos package: ibm-java2-demos-50-win-x86_64.zip
If you install the SDK or Runtime Environment from the compressed package, you cannot use the Java plug-in.
If you install the SDK or Runtime Environment on a mapped (network) drive, the control panel icon will not be available in the Windows control panel. Installation on a mapped (network) drive is not supported.
Attended (interactive) installation
Use the attended installation to install the SDK or JRE on a single client.
Procedure
- Run ibm-java2-sdk-50-win-x86_64.exe (for the SDK) or ibm-java2-jre-50-win-x86_64.exe (for the Runtime Environment only).
- Follow the instructions in the installation wizard.
The Runtime Environment is installed by default in the directory C:\Program Files\IBM\Java50\jre.
If you downloaded the SDK installable package, you can choose which components to install:
- The SDK development tools (for example, the Java compiler).
- The Runtime Environment.
- The source code for the class libraries, used by some tools to debug applications.
In the installation wizard, you are presented with the following options:
- Typical - this option installs all three components.
- Compact - this option installs the Runtime Environment only.
- Custom - this option lets you choose which components to install.
On Windows Vista, there might be a delay after selecting the installation language.
If the installation fails with the error message "Error applying transform", the Windows Installer configuration information has become corrupted. To fix the error, use the Windows Installer Cleanup Utility from http://support.microsoft.com/kb/290301 to remove the corrupted Windows Installer configuration information.
Installing the Runtime Environment as the system Java Virtual Machine
When you install the Runtime Environment (either as part of the SDK installable package or from the Runtime Environment installable package), you are asked whether you want to install the Runtime Environment as the system Java Virtual Machine (JVM). If you do install it as the system JVM, the installation program copies the java.exe and javaw.exe launchers into the Windows system directory.
If a version of java.exe or javaw.exe currently exists in the Windows system directory, you are prompted to overwrite the existing version with the current version. Installing these files into the Windows system directory makes this Runtime Environment the default JVM for the system. In addition, the "Current Version" registry key is set to match this installation.
Unattended installation
Use the unattended installation to install the SDK or JRE on multiple clients.
To create an unattended installation, you must first complete an attended installation and create a response file (setup.iss) that records the choices you made during installation. The response file you create must be correct for the computers on which you plan to use it. If necessary, create several response files to use for installing the packages on computers that have different configurations.
To create a response file while running the installation, at a command prompt type:
ibm-java2-sdk-50-win-x86_64 /r
or
ibm-java2-jre-50-win-x86_64 /r
Depending on your Windows product, a response file (setup.iss) is created in either the C:\Windows or C:\Winnt directory.
The following message might occur during an interactive installation:
Another Java Runtime Environment is currently installed as the System JVM. Select Yes to overwrite this version or No to exit this installation.
If this message is displayed, click No and exit from the installation. Go to the Windows system directory and delete the following two files:
- java.exe
- javaw.exe
After you have deleted the files, restart the interactive installation using the command shown at the beginning of this section.
On the system on which you will run the unattended installation, copy the setup.iss response file to the C:\Windows directory. After you have copied the file, at a command prompt type:
ibm-java2-sdk-50-win-x86_64 /s /f1c:\Windows\setup.iss /f2c:\setup.log ibm-java2-jre-50-win-x86_64 /s /f1c:\Windows\setup.iss /f2c:\setup.log
- There are no spaces after /f1 or /f2.
- The /f1 flag specifies the name and location of the response file. The /f2 flag specifies the name and location of the log file.
If the installation is successful, the log file contains the string ResultCode=0. If the installation is not successful, the log file will contain a different result code.
Enabling the IBM Accessibility Bridge
The IBM Accessibility Bridge is installed but disabled by default. To enable the IBM Accessibility Bridge, uncomment the assistive_technologies entry in the Accessibility.properties file.
About this task
The Accessibility.properties file is in the jre/lib directory. Delete the # from the beginning of the following line:
#assistive_technologies=JawBridge
This Web site tells you more about the Accessibility Utilities:
http://www.oracle.com/technetwork/java/javase/tech/index-jsp-140174.html
Disabling Java Accessibility support
You can disable Java Accessibility support to improve the JVM loading performance of Java applications that do not provide Java assistive technology support, especially over network links. To disable Java Accessibility support, set the JAVA_ASSISTIVE environment variable to OFF.
About this task
An assistive technology, such as JawBridge, is not available if this environment variable is set to OFF, even if the technology is enabled in the Accessibility.properties file.
Information for European language users
In Windows, a process has two codepages: the ANSI (or Windows) code page and the OEM (or DOS) code page. The javaw command always uses the ANSI code page unless the console.encoding system property is set.
The command window typically uses the OEM code page. Java console output uses the code page of the command window from which Java is started. However, the javaw command always uses the ANSI code page. You specify the code page to use for console output with the -Dconsole.encoding option on the java or javaw launcher. For example, -Dconsole.encoding=Cp1252 causes all console output to be in the Windows ANSI Latin1 code page (1252).
Setting the path
If you alter the PATH environment variable, you will override any existing Java launchers in your path.
About this task
The PATH environment variable enables Windows to find programs and utilities, such as javac, java, and javadoc tool, from any current directory. To display the current value of your PATH, type the following at a command prompt:
echo %PATH%
To add the Java launchers to your path:
- If you installed the SDK or Runtime Environment in C:\Program Files\IBM\Java50\ add the following
directories to the PATH environment variable:
- C:\Program Files\IBM\Java50\bin (SDK only)
- C:\Program Files\IBM\Java50\jre\bin (SDK and Runtime Environment)
- Close and reopen any command prompt windows to activate the new PATH environment variable.
Results
After setting the path, you can run a tool by typing its name at a command prompt from any directory. For example, to compile the file Myfile.Java, at a command prompt, type:
javac Myfile.Java
Setting the class path
The class path tells the SDK tools, such as java, javac, and the javadoc tool, where to find the Java class libraries.
About this task
You should set the class path explicitly only if:
- You require a different library or class file, such as one that you develop, and it is not in the current directory.
- You change the location of the bin and lib directories and they no longer have the same parent directory.
- You plan to develop or run applications using different runtime environments on the same system.
To display the current value of your CLASSPATH environment variable, type the following command at a command prompt:
echo %CLASSPATH%
If you develop and run applications that use different runtime environments, including other versions that you have installed separately, you must set the CLASSPATH and PATH explicitly for each application. If you run multiple applications simultaneously and use different runtime environments, each application must run in its own command prompt.
Updating your SDK or JRE for daylight saving time changes
You can apply recent changes to daylight saving time using the IBM Time Zone Update Utility for Java (JTZU).
About this task
Many countries around the world use a daylight saving time (DST) convention. Typically, clocks move forward by one hour during the summer months to create more daylight hours during the afternoon and less during the morning. This practice has many implications, including the need to adjust system clocks in computer systems. Occasionally, countries change their DST start and end dates. These changes can affect the date and time functions in applications, because the original start and end dates are programmed into the operating system and in Java software. To avoid this problem you must update operating systems and Java installations with the new DST information.
The Olson time zone database is an external resource that compiles information about the time zones around the world. This database establishes standard names for time zones, such as "America/New_York", and provides regular updates to time zone information that can be used as reference data. To ensure that Java JREs and SDKs contain up to date DST information, IBM incorporates the latest Olson update into each Java service refresh. To find out which Olson time zone update is included for a particular service refresh, see https://www.ibm.com/developerworks/java/jdk/dst/olson_table.html.
If a DST change has been introduced since the last service refresh, you can use JTZU to directly update your Java installation. You can also use this tool to update your installation if you are unable to move straight to the latest service refresh. JTZU is available from IBM developerWorks® using the following link: https://www.ibm.com/developerworks/java/jdk/dst/jtzu.html.
Results
After updating your Java installation with any recent DST changes, your application can handle time and date calculations correctly.
Uninstallation
Use the Windows Add/Remove programs utility to uninstall the SDK or Runtime Environment.
Procedure
- Double-click My Computer on the Windows desktop.
- Double-click Control Panel.
- Double-click Add/Remove Programs.
- Click IBM 64-bit SDK for Java 2 v5.0 in the list, and then click Change/Remove.
- Click OK.
Results
This procedure removes all of the packages that are installed with the Installer. It does not remove the Java Communications API package (see Uninstalling Java Communications API) or any additional files that have been extracted from the compressed packages.
Warning messages might be displayed notifying you that not all files, or registry entries, or both, were removed. These warnings are issued because Windows believes that certain files are still in use; these files, or registry entries, or both, will be removed when your system is next restarted.
What to do next
If you uninstall version 1.3.1 or earlier while the IBM 64-bit SDK for Windows, v5.0 is still installed on the system, the uninstaller removes the following registry keys, and all the subkeys, that are required by the v5.0 installation:
- HKEY_LOCAL_MACHINE/Software/IBM/Java2 Runtime Environment
- HKEY_LOCAL_MACHINE/Software/IBM/Java Development Kit
Reinstall v5.0 after uninstalling version 1.3.1 or earlier. This uninstaller limitation has been fixed for version 1.4.0 and above.
Running Java applications
Java applications can be started using the java launcher or through JNI. Settings are passed to a Java application using command-line arguments, environment variables, and properties files.
The java and javaw commands
An overview of the java and javaw commands.
Purpose
The java and javaw tools start a Java application by starting a Java Runtime Environment and loading a specified class.
The javaw command is identical to java, except that javaw has no associated console window. Use javaw when you do not want a command prompt window to be displayed. The javaw launcher displays a window with error information if it fails.
Usage
The JVM searches for the initial class (and other classes that are used) in three sets of locations: the bootstrap class path, the installed extensions, and the user class path. The arguments that you specify after the class name or jar file name are passed to the main function.
The java and javaw commands have the following syntax:
java [ options ] <class> [ arguments ... ] java [ options ] -jar <file.jar> [ arguments ... ] javaw [ options ] <class> [ arguments ... ] javaw [ options ] -jar <file.jar> [ arguments ... ]
Parameters
- [options]
- Command-line options to be passed to the runtime environment.
- <class>
- Startup class. The class must contain a main() method.
- <file.jar>
- Name of the jar file to start. It is used only with the -jar option. The named jar file must contain class and resource files for the application, with the startup class indicated by the Main-Class manifest header.
- [arguments ...]
- Command-line arguments to be passed to the main() function of the startup class.
Obtaining version information
You obtain the IBM build and version number for your Java installation using the -version option.
Procedure
- Open a command prompt.
- Type the following command:
java -version
You will see information similar to:java version "1.5.0" Java(TM) 2 Runtime Environment, Standard Edition (build pwa64dev-20051104) IBM J9 VM (build 2.3, J2RE 1.5.0 IBM J9 2.3 Windows XP amd64-64 j9vmwa6423-20051103 (JIT enabled) J9VM - 20051027_03723_lHdSMR JIT - 20051027_1437_r8 GC - 20051020_AA) JCL - 20051102
Exact build dates and versions will change.
Specifying Java options and system properties
You can specify Java options and system properties on the command line, by using an options file, or by using an environment variable.
About this task
These methods of specifying Java options are listed in order of precedence. Rightmost options on the command line have precedence over leftmost options; for example, if you specify:
java -Xint -Xjit myClass
The -Xjit option takes precedence.
Procedure
- By specifying the option or property on the command line. For example:
java -Dmysysprop1=tcpip -Dmysysprop2=wait -Xdisablejavadump MyJavaClass
- By creating a file that contains the options, and specifying it on the command line using -Xoptionsfile=<file>.
- By creating an environment variable called IBM_JAVA_OPTIONS containing
the options. For example:
set IBM_JAVA_OPTIONS="-Dmysysprop1=tcpip -Dmysysprop2=wait -Xdisablejavadump"
Standard options
The definitions for the standard options.
See JVM command-line options for information about nonstandard (-X) options.
- -agentlib:<libname>[=<options>]
- Loads a native agent library <libname>; for example -agentlib:hprof. For more information, specify -agentlib:jdwp=help and -agentlib:hprof=help on the command line.
- -agentpath:libname[=<options>]
- Loads a native agent library by full path name.
- -assert
- Prints help on assert-related options.
- -cp <directories and .zip or .jar files separated by ;>
- Sets the search path for application classes and resources. If -classpath and -cp are not used and the CLASSPATH environment variable is not set, the user class path is, by default, the current directory (.).
- -classpath <directories and .zip or .jar files separated by ;>
- Sets the search path for application classes and resources. If -classpath and -cp are not used and the CLASSPATH environment variable is not set, the user class path is, by default, the current directory (.).
- -D<property name>=<value>
- Sets a system property.
- -help or -?
- Prints a usage message.
- -javaagent:<jarpath>[=<options>]
- Load a Java programming language agent. For more information, see the java.lang.instrument API documentation.
- -jre-restrict-search
- Include user private JREs in the version search.
- -no-jre-restrict-search
- Exclude user private JREs in the version search.
- -showversion
- Prints product version and continues.
- -verbose:<option>[,<option>...]
- Enables verbose output. Separate multiple options using commas.
The available options are:
- class
- Writes an entry to stderr for each class that is loaded.
- gc
- Writes verbose garbage collection information to stderr. Use -Xverbosegclog (see Garbage Collector command-line options for more information) to control the output. See the Diagnostics Guide for more information.
- jni
- Writes information to stderr describing the JNI services called by the application and JVM.
- sizes
- Writes information to stderr describing the active memory usage settings.
- stack
- Writes information to stderr describing the Java and C stack usage for each thread.
- -version
- Prints product version.
- -version:<value>
- Requires the specified version to run, for example "1.5".
- -X
- Prints help on nonstandard options.
Globalization of the java command
The java and javaw launchers accept arguments and class names containing any character that is in the character set of the current locale. You can also specify any Unicode character in the class name and arguments by using Java escape sequences.
To do this, use the -Xargencoding command-line option.
- -Xargencoding
- Use argument encoding. To specify a Unicode character, use escape sequences in the form \u####, where # is a hexadecimal digit (0 to 9, A to F).
- -Xargencoding:utf8
- Use UTF8 encoding.
- -Xargencoding:latin
- Use ISO8859_1 encoding.
For example, to specify a class called HelloWorld using Unicode encoding for both capital letters, use this command:
java -Xargencoding '\u0048ello\u0057orld'
The java and javaw commands provide translated messages. These messages differ based on the locale in which Java is running. The detailed error descriptions and other debug information that is returned by java is in English.
Executing a Java file automatically
To set a Java class or jar file to start automatically from the Windows explorer, use the Tools > Folder Options > File Type option of Windows Explorer.
About this task
Alternatively, at a command prompt type:
assoc .class=javaclass ftype javaclass=C:\Program Files\IBM\Java50\jre\bin\java.exe''%l''%*'
- The %l is the number 1 and not the letter l.
- If your Java is installed in a directory other than C:\Program Files\IBM\Java50\, substitute your installation directory.
The Just-In-Time (JIT) compiler
The IBM Just-In-Time (JIT) compiler dynamically generates machine code for frequently used bytecode sequences in Java applications and applets during their execution. The JIT v5.0 compiler delivers new optimizations as a result of compiler research, improves optimizations implemented in previous versions of the JIT, and provides better hardware exploitation.
The JIT is included in both the IBM SDK and Runtime Environment, which is enabled by default in user applications and SDK tools. Typically, you do not start the JIT explicitly; the compilation of Java bytecode to machine code occurs transparently. You can disable the JIT to help isolate a problem. If a problem occurs when executing a Java application or an applet, you can disable the JIT to help isolate the problem. Disabling the JIT is a temporary measure only; the JIT is required to optimize performance.
For more information about the JIT, see the Diagnostics Guide.
Disabling the JIT
The JIT can be disabled in a number of different ways. Both command-line options override the JAVA_COMPILER environment variable.
About this task
Turning off the JIT is a temporary measure that can help isolate problems when debugging Java applications.
Procedure
- Set the JAVA_COMPILER environment variable
to NONE or the empty string before running the java application. At the command prompt where
the application is run, type:
set JAVA_COMPILER=NONE
You can also permanently set JAVA_COMPILER by using the graphical user interface. Open Control Panel, select System, and on the Advanced tab, select Environment Variables. - Use the -D option on the JVM command line
to set the java.compiler property to NONE or
the empty string. Type the following at a command prompt:
java -Djava.compiler=NONE <class>
- Use the -Xint option on the JVM command line. Type the following at a command prompt:
java -Xint <class>
Enabling the JIT
The JIT is enabled by default. You can explicitly enable the JIT in a number of different ways. Both command-line options override the JAVA_COMPILER environment variable.
Procedure
- Set the JAVA_COMPILER environment variable
to jitc before running the Java application. At
the command prompt where the application
is run, enter:
set JAVA_COMPILER=jitc
You can also permanently set JAVA_COMPILER by using the graphical user interface. Open Control Panel, select System, and on the Advanced tab, select Environment Variables. If the JAVA_COMPILER environment variable is an empty string, the JIT remains disabled. To disable the environment variable, at the prompt, enter:set JAVA_COMPILER=
- Use the -D option on the JVM command line
to set the java.compiler property to jitc. At a prompt,
enter:
java -Djava.compiler=jitc <class>
- Use the -Xjit option on the JVM command line. Do not specify the -Xint option at the same
time. At a prompt,
enter:
java -Xjit <class>
Determining whether the JIT is enabled
You can determine the status of the JIT using the -version option.
Procedure
Run the java launcher with the -version option. Enter the following at a command prompt:
java -version
If
the JIT is not in use, a message is displayed that includes the following:
(JIT disabled)
If
the JIT is in use, a message is displayed that includes the following:
(JIT enabled)
What to do next
For more information about the JIT, see the Diagnostics Guide.
Specifying garbage collection policy
The Garbage Collector manages the memory used by Java and by applications running in the JVM.
When the Garbage Collector receives a request for storage, unused memory in the heap is set aside in a process called "allocation". The Garbage Collector also checks for areas of memory that are no longer referenced, and releases them for reuse. This is known as "collection".
The collection phase can be triggered by a memory allocation fault, which occurs when no space is left for a storage request, or by an explicit System.gc() call.
Garbage collection can significantly affect application performance, so the IBM virtual machine provides various methods of optimizing the way garbage collection is carried out, potentially reducing the effect on your application.
For more detailed information about garbage collection, see the Diagnostics Guide.
Garbage collection options
The -Xgcpolicy options control the behavior of the Garbage Collector. They make trade-offs between throughput of the application and overall system, and the pause times that are caused by garbage collection.
The format of the option and its values is:
- -Xgcpolicy:gencon
- Requests the combined use of concurrent and generational GC to help minimize the time that is spent in any garbage collection pause.
- -Xgcpolicy:optavgpause
- Reduces the time spent in garbage collection pauses and limits the effect of increasing heap size on the length of the garbage collection pause. Use optavgpause if your configuration has a large heap.
- -Xgcpolicy:optthruput
- (Default value.) Delivers high throughput to applications, but at the cost of occasional pauses.
Pause time
If an object cannot be created from the available space in the heap, the Garbage Collector attempts to tidy the heap. The intention is that subsequent allocation requests can be satisfied quickly.
The Garbage Collector tries to returning the heap to a state in which the immediate and subsequent space requests are successful. The Garbage Collector identifies unreferenced "garbage" objects, and deletes them. This work takes place in a garbage collection cycle. These cycles might introduce occasional, unexpected pauses in the execution of application code. As applications grow in size and complexity, and heaps become correspondingly larger, the garbage collection pause time tends to grow in size and significance. Pause time can vary from a few milliseconds to many seconds. The actual time depends on the size of the heap, and the quantity of garbage.
Pause time reduction
The JVM uses two techniques to reduce pause times: concurrent garbage collection and generational garbage collection.
The -Xgcpolicy:optavgpause command-line option requests the use of concurrent garbage collection (GC) to reduce significantly the time that is spent in garbage collection pauses. Concurrent GC reduces the pause time by performing some garbage collection activities concurrently with normal program execution to minimize the disruption caused by the collection of the heap. The -Xgcpolicy:optavgpause option also limits the effect of increasing the heap size on the length of the garbage collection pause. The -Xgcpolicy:optavgpause option is most useful for configurations that have large heaps. With the reduced pause time, you might experience some reduction of throughput to your applications.
During concurrent GC, a significant amount of time is wasted identifying relatively long-lasting objects that cannot then be collected. If garbage collection concentrates on only the objects that are most likely to be recyclable, you can further reduce pause times for some applications. Generational GC reduces pause times by dividing the heap into two generations: the "new" and the "tenure" areas. Objects are placed in one of these areas depending on their age. The new area is the smaller of the two and contains new objects; the tenure is larger and contains older objects. Objects are first allocated to the new area; if they have active references for long enough, they are promoted to the tenure area.
Generational GC depends on most objects not lasting long. Generational GC reduces pause times by concentrating the effort to reclaim storage on the new area because it has the most recyclable space. Rather than occasional but lengthy pause times to collect the entire heap, the new area is collected more frequently and, if the new area is small enough, pause times are comparatively short. However, generational GC has the drawback that, over time, the tenure area might become full. To minimize the pause time when this situation occurs, use a combination of concurrent GC and generational GC. The -Xgcpolicy:gencon option requests the combined use of concurrent and generational GC to help minimize the time that is spent in any garbage collection pause.
Environments with very full heaps
If the Java heap becomes nearly full, and very little garbage can be reclaimed, requests for new objects might not be satisfied quickly because no space is immediately available.
If the heap is operated at near-full capacity, application performance might suffer regardless of which garbage collection options are used; and, if requests for more heap space continue to be made, the application might receive an OutOfMemoryError, which results in JVM termination if the exception is not caught and handled. At this point, the JVM produces a Javadump file for use during diagnostics. In these conditions, you are recommended either to increase the heap size by using the -Xmx option or to reduce the number of objects in use.
For more information, see the Diagnostics Guide.
Euro symbol support
The IBM SDK and Runtime Environment set the Euro as the default currency for those countries in the European Monetary Union (EMU) for dates on or after 1 January, 2002. From 1 January 2008, Cyprus and Malta also have the Euro as the default currency.
To use the old national currency, specify -Duser.variant=PREEURO on the Java command line.
If you are running the UK, Danish, or Swedish locales and want to use the Euro, specify -Duser.variant=EURO on the Java command line.
Support for Serbian locale
From Service Refresh 5, the following new locale is added: Serbia (SE), with three new locale variations.
The locale variations are:
- sr_RS
- sr_Cyrl_RS
- sr_Latn_RS
The existing locale variations for the former Serbia and Montenegro are maintained as before. The 3-letter country code SRB, corresponding to the 2-letter country code RC, is also added.
Developing Java applications
The SDK for Windows contains many tools and libraries required for Java software development.
See Contents of the SDK for details of the tools available.
Transforming XML documents
The IBM SDK contains the XSLT4J processor and the XML4J parser. With these tools, you can parse and transform XML documents independently from any given XML processing implementation. By using "Factory Finders" to locate the SAXParserFactory, DocumentBuilderFactory and TransformerFactory implementations, your application can swap between different implementations without having to change any code.
About this task
The IBM SDK contains the XSLT4J processor and the XML4J parser that conform to the JAXP 1.3 specification.
The XML technology included with the IBM SDK is similar to Apache Xerces Java and Apache Xalan Java. See http://xml.apache.org/xerces2-j/ and http://xml.apache.org/xalan-j/ for more information.
With the XSLT4J processor, you choose between the original XSLT Interpretive processor and the XSLT Compiling processor. The Interpretive processor is for tooling and debugging environments and supports the XSLT extension functions that are not supported by the XSLT Compiling processor. The XSLT Compiling processor is for high performance runtime environments; it generates a transformation engine, or translet, from an XSL style sheet. This approach separates the interpretation of stylesheet instructions from their runtime application to XML data.
The XSLT Interpretive processor is the default processor. To use the XSLT Compiling processor:
- Change the entry in the jaxp.properties file, (located in C:\Program Files\IBM\Java50\jre\lib) or
- Set the javax.xml.transform.TransformerFactory system property to org.apache.xalan.xsltc.trax.TransformerFactoryImpl.
To implement properties in the jaxp.properties file, copy jaxp.properties.sample to jaxp.properties in C:\Program Files\IBM\Java50\jre\lib. This file also contains full details about the procedure used to determine which implementations to use for the TransformerFactory, SAXParserFactory, and the DocumentBuilderFactory.
To improve the performance when you transform a StreamSource object with the XSLT Compiling processor, specify the com.ibm.xslt4j.b2b2dtm.XSLTCB2BDTMManager class as the provider of the service org.apache.xalan.xsltc.dom.XSLTCDTMManager. To determine the service provider, try each step until you find org.apache.xalan.xsltc.dom.XSLTCDTMManager:
- Check the setting of the system property org.apache.xalan.xsltc.dom.XSLTCDTMManager.
- Check the value of the property org.apache.xalan.xsltc.dom.XSLTCDTMManager in the file C:\Program Files\IBM\Java50\jre\lib\xalan.properties.
- Check the contents of the file META-INF\services\org.apache.xalan.xsltc.dom.XSLTCDTMManager for a class name.
- Use the default service provider, org.apache.xalan.xsltc.dom.XSLTCDTMManager.
The XSLT Compiling processor detects the service provider for the org.apache.xalan.xsltc.dom.XSLTCDTMManager service when a javax.xml.transform.TransformerFactory object is created. Any javax.xml.transform.Transformer or javax.xml.transform.sax.TransformerHandler objects that are created by using that TransformerFactory object use the same service provider. You can change service providers by modifying one of the settings described above and then creating a new TransformerFactory object.
Using an older version of Xerces or Xalan
If you are using an older version of Xerces (before 2.0) or Xalan (before 2.3) in the endorsed override, you might get a NullPointerException when you start your application. This exception occurs because these older versions do not handle the jaxp.properties file correctly.
About this task
To avoid this situation, use one of the following workarounds:
- Upgrade to a newer version of the application that implements the latest Java API for XML Programming (JAXP) specification (https://jaxp.dev.java.net/).
- Remove the jaxp.properties file from C:\Program Files\IBM\Java50\jre\lib.
- Uncomment the entries in the jaxp.properties file in C:\Program Files\IBM\Java50\jre\lib.
- Set the system property for javax.xml.parsers.SAXParserFactory, javax.xml.parsers.DocumentBuilderFactory, or javax.xml.transform.TransformerFactory using the -D command-line option.
- Set the system property for javax.xml.parsers.SAXParserFactory, javax.xml.parsers.DocumentBuilderFactory, or javax.xml.transform.TransformerFactory in your application. For an example, see the JAXP 1.3 specification.
- Explicitly set the SAX parser, Document builder, or Transformer
factory using the IBM_JAVA_OPTIONS environment
variable.
set IBM_JAVA_OPTIONS=-Djavax.xml.parsers.SAXParserFactory= org.apache.xerces.jaxp.SAXParserFactoryImpl
orset IBM_JAVA_OPTIONS=-Djavax.xml.parsers.DocumentBuilderFactory= org.apache.xerces.jaxp.DocumentBuilderFactoryImpl
orset IBM_JAVA_OPTIONS=-Djavax.xml.transform.TransformerFactory= org.apache.xalan.processor.TransformerFactoryImpl
Debugging Java applications
To debug Java programs, you can use the Java Debugger (JDB) application or other debuggers that communicate by using the Java Platform Debugger Architecture (JPDA) that is provided by the SDK for the operating system.
More information about problem diagnosis using Java can be found in the Diagnostics Guide.
Java Debugger (JDB)
The Java Debugger (JDB) is included in the SDK for Windows. The debugger is started with the jdb command; it attaches to the JVM using JPDA.
To debug a Java application:
- Start the JVM with the following options:
java -agentlib:jdwp=transport=dt_shmem,server=y,address=<port> <class>
The JVM starts up, but suspends execution before it starts the Java application. - In a separate session, you can attach the debugger to the JVM:
jdb -attach <port>
The debugger will attach to the JVM, and you can now issue a range of commands to examine and control the Java application; for example, type run to allow the Java application to start.
For more information about JDB options, type:
jdb -help
For more information about JDB commands:
- Type jdb
- At the jdb prompt, type help
You can also use JDB to debug Java applications running on remote workstations. JPDA uses a TCP/IP socket to connect to the remote JVM.
- Start the JVM with the following options:
java -agentlib:jdwp=transport=dt_shmem,server=y,address=<port> <class>
The JVM starts up, but suspends execution before it starts the Java application. - Attach the debugger to the remote JVM:
jdb -connect com.sun.jdi.SocketAttach:hostname=<host>,port=<port>
The Java Virtual Machine Debugging Interface (JVMDI) is not supported in this release. It has been replaced by the Java Virtual Machine Tool Interface (JVMTI).
For more information about JDB and JPDA and their usage, see these Web sites:
- http://www.oracle.com/technetwork/java/javase/tech/jpda-141715.html
- http://download.oracle.com/javase/1.5.0/docs/guide/jpda/
- http://download.oracle.com/javase/1.5.0/docs/guide/jpda/jdb.html
Determining whether your application is running on a 32-bit or 64-bit JVM
Some Java applications must be able to determine whether they are running on a 32-bit JVM or on a 64-bit JVM. For example, if your application has a native code library, the library must be compiled separately in 32- and 64-bit forms for platforms that support both 32- and 64-bit modes of operation. In this case, your application must load the correct library at runtime, because it is not possible to mix 32- and 64-bit code.
About this task
The system property com.ibm.vm.bitmode allows applications to determine the mode in which your JVM is running. It returns the following values:
- 32 - the JVM is running in 32-bit mode
- 64 - the JVM is running in 64-bit mode
You can inspect the com.ibm.vm.bitmode property from inside your application code using the call:
System.getProperty("com.ibm.vm.bitmode");
How the JVM processes signals
When a signal is raised that is of interest to the JVM, a signal handler is called. This signal handler determines whether it has been called for a Java or non-Java thread.
If the signal is for a Java thread, the JVM takes control of the signal handling. If an application handler for this signal is installed and you did not specify the -Xnosigchain command-line option, the application handler for this signal is called after the JVM has finished processing.
If the signal is for a non-Java thread, and the application that installed the JVM had previously installed its own handler for the signal, control is given to that handler. Otherwise, if the signal is requested by the JVM or Java application, the signal is ignored or the default action is taken.
Where a signal is generated externally (for example, when you enter CTRL-BREAK), a new thread is created for the signal handler. In this case, the JVM signal handler performs its processing and if an application handler for this signal is installed and you did not specify the -Xnosigchain command-line option, the application handler for this signal is called.
For exception and error signals, the JVM either:
- Handles the condition and recovers, or
- Enters a controlled shut down sequence where it:
- Produces dumps, to describe the JVM state at the point of failure
- Calls your application's signal handler for that signal
- Calls any application-installed unexpected shut down hook
- Performs the necessary JVM cleanup
For interrupt signals, the JVM also enters a controlled shut down sequence, but this time it is treated as a normal termination that:
- Calls your application's signal handler for that signal
- Calls all application shut down hooks
- Calls any application-installed exit hook
- Performs the necessary JVM cleanup
The shut down is identical to the shut down initiated by a call to the Java method System.exit().
Other signals that are used by the JVM are for internal control purposes and do not cause it to stop. The only control signal of interest is SIGBREAK, which causes a Javadump to be generated.
Signals used by the JVM
The types of signals are Interrupts, and Controls.
Table 2 shows the signals that are used by the JVM. The signals are grouped in the table by type or use, as follows:
- Exceptions
- The operating system synchronously raises an appropriate exception signal whenever an unrecoverable condition occurs.
- Errors
- The JVM raises a SIGABRT if it detects a condition from which it cannot recover.
- Interrupts
- Interrupt signals are raised asynchronously, from outside a JVM process, to request shut down.
- Controls
- Other signals that are used by the JVM for control purposes.
Signal Name | Signal type | Description | Disabled by -Xrs | Disabled by -Xrs:sync |
---|---|---|---|---|
SIGINT (2) | Interrupt | Interactive attention (CTRL-C). JVM exits normally. | Yes | No |
SIGTERM (15) | Interrupt | Termination request. JVM will exit normally. | Yes | No |
SIGBREAK | Control | A break signal from a terminal. By default, this triggers a Javadump. | Yes | No |
The IBM JVM uses the AddVectoredExceptionHandler() and the SetConsoleCtrlHandler() APIs. These are both disabled with -Xrs, however, only the use of the AddVectoredExceptionHandler() API is disabled by -Xrs:sync. -Xnosigchain is ignored on Windows.
Use the -Xrs (reduce signal usage) option to prevent the JVM from handling most signals. For more information, see Oracle's Java application launcher page.
The signals 2 (SIGINT) and 15 (SIGTERM) on JVM threads causes the JVM to shut down; therefore, an application signal handler should not attempt to recover from this signal unless it no longer requires the JVM.
Linking a native code driver to the signal-chaining library
The Runtime Environment contains signal-chaining. Signal-chaining enables the JVM to interoperate more efficiently with native code that installs its own signal handlers.
About this task
Signal-chaining enables an application to link and load the shared library jsig.dll before msvcrt.dll. The jsig.dll library ensures that calls to signal() are intercepted so that their handlers do not replace the JVM's signal handlers. Instead, these calls save the new signal handlers, or "chain" them behind the handlers that are installed by the JVM. Later, when any of these signals are raised and found not to be targeted at the JVM, the preinstalled handlers are called.
The libjsig.dll library also hides JVM signal handlers from the application. Therefore, calls such as signal(), sigset(), and sigaction() that are made after the JVM has started no longer return a reference to the JVM's signal handler, but instead return any handler that was installed before JVM startup.
The environment variable JAVA_HOME should be set to the location of the SDK, for example,C:\Program Files\IBM\Java50\.
To use jsig.dll, link it with the application that creates or embeds a JVM.
Writing JNI applications
Valid Java Native Interface (JNI) version numbers that programs can specify on the JNI_CreateJavaVM() API call are: JNI_VERSION_1_2(0x00010002) and JNI_VERSION_1_4(0x00010004).
This version number determines only the level of the JNI to use. The actual level of the JVM that is created is specified by the JSE libraries (that is, v5.0). The JNI level does not affect the language specification that is implemented by the JVM, the class library APIs, or any other area of JVM behavior. For more information, see http://download.oracle.com/javase/1.5.0/docs/guide/jni.
If your application needs two JNI libraries, one built for 32- and the other for 64-bit, use the com.ibm.vm.bitmode system property to determine if you are running with a 32- or 64-bit JVM and choose the appropriate library.
Configuring large page memory allocation
You can enable large page support, on systems that support it, by starting Java with the -Xlp option.
About this task
Large page usage is primarily intended to provide performance improvements to applications that allocate a great deal of memory and frequently access that memory. The large page performance improvements are a result of the reduced number of misses in the Translation Lookaside Buffer (TLB). The TLB maps a larger virtual storage area range and thus causes this improvement.
For the JVM to use large pages, your system must have an adequate number of contiguous large pages available. If large pages cannot be allocated, even when enough pages are available, possibly the large pages are not contiguous.
Large page allocations only succeed if the local administrative policy for the JVM user is configured to enable "Lock pages in memory".
CORBA support
The Java Platform, Standard Edition (J2SE) supports, at a minimum, the specifications that are defined in the compliance document from Oracle. In some cases, the IBM J2SE ORB supports more recent versions of the specifications.
The minimum specifications supported are defined in the Official Specifications for CORBA support in J2SE: http://download.oracle.com/javase/1.5.0/docs/api/org/omg/CORBA/doc-files/compliance.html.
Support for GIOP 1.2
This SDK supports all versions of GIOP, as defined by chapters 13 and 15 of the CORBA 2.3.1 specification, OMG document formal/99-10-07.
http://www.omg.org/cgi-bin/doc?formal/99-10-07
Bidirectional GIOP is not supported.
Support for Portable Interceptors
This SDK supports Portable Interceptors, as defined by the OMG in the document ptc/01-03-04, which you can obtain from:
http://www.omg.org/cgi-bin/doc?ptc/01-03-04
Portable Interceptors are hooks into the ORB that ORB services can use to intercept the normal flow of execution of the ORB.
Support for Interoperable Naming Service
This SDK supports the Interoperable Naming Service, as defined by the OMG in the document ptc/00-08-07, which you can obtain from:
http://www.omg.org/cgi-bin/doc?ptc/00-08-07
The default port that is used by the Transient Name Server (the tnameserv command), when no ORBInitialPort parameter is given, has changed from 900 to 2809, which is the port number that is registered with the IANA (Internet Assigned Number Authority) for a CORBA Naming Service. Programs that depend on this default might have to be updated to work with this version.
The initial context that is returned from the Transient Name Server is now an org.omg.CosNaming.NamingContextExt. Existing programs that narrow the reference to a context org.omg.CosNaming.NamingContext still work, and do not need to be recompiled.
The ORB supports the -ORBInitRef and -ORBDefaultInitRef parameters that are defined by the Interoperable Naming Service specification, and the ORB::string_to_object operation now supports the ObjectURL string formats (corbaloc: and corbaname:) that are defined by the Interoperable Naming Service specification.
The OMG specifies a method ORB::register_initial_reference to register a service with the Interoperable Naming Service. However, this method is not available in the Oracle Java Core API at Version 5.0. Programs that have to register a service in the current version must invoke this method on the IBM internal ORB implementation class. For example, to register a service "MyService":
((com.ibm.CORBA.iiop.ORB)orb).register_initial_reference("MyService", serviceRef);
Where orb is an instance of org.omg.CORBA.ORB, which is returned from ORB.init(), and serviceRef is a CORBA Object, which is connected to the ORB. This mechanism is an interim one, and is not compatible with future versions or portable to non-IBM ORBs.
System properties for tracing the ORB
A runtime debug feature provides improved serviceability. You might find it useful for problem diagnosis or it might be requested by IBM service personnel.
Tracing Properties
- com.ibm.CORBA.Debug=true
- Turns on ORB tracing.
- com.ibm.CORBA.CommTrace=true
- Adds GIOP messages (sent and received) to the trace.
- com.ibm.CORBA.Debug.Output=<file>
- Specify the trace output file. By default, this is of the form orbtrc.DDMMYYYY.HHmm.SS.txt.
Example of ORB tracing
For example, to trace events and formatted GIOP messages from the command line, type:
java -Dcom.ibm.CORBA.Debug=true -Dcom.ibm.CORBA.CommTrace=true <myapp>
Limitations
Do not enable tracing for normal operation, because it might cause performance degradation. Even if you have switched off tracing, FFDC (First Failure Data Capture) is still working, so serious errors are reported. If a debug output file is generated, examine it to check on the problem. For example, the server might have stopped without performing an ORB.shutdown().
The content and format of the trace output might vary from version to version.
System properties for tuning the ORB
The ORB can be tuned to work well with your specific network. The properties required to tune the ORB are described here.
- com.ibm.CORBA.FragmentSize=<size in bytes>
- Used to control GIOP 1.2 fragmentation. The default size is 1024 bytes.
To disable fragmentation, set the fragment size to 0 bytes:
java -Dcom.ibm.CORBA.FragmentSize=0 <myapp>
- com.ibm.CORBA.RequestTimeout=<time in seconds>
- Sets the maximum time to wait for a CORBA Request. By default the ORB waits indefinitely. Do not set the timeout too low to avoid connections ending unnecessarily.
- com.ibm.CORBA.LocateRequestTimeout=<time in seconds>
- Set the maximum time to wait for a CORBA LocateRequest. By default the ORB waits indefinitely.
- com.ibm.CORBA.ListenerPort=<port number>
- Set the port for the ORB to read incoming requests on. If this property is set, the ORB starts listening as soon as it is initialized. Otherwise, it starts listening only when required.
Java security permissions for the ORB
When running with a Java SecurityManager, invocation of some methods in the CORBA API classes might cause permission checks to be made, which might result in a SecurityException. If your program uses any of these methods, ensure that it is granted the necessary permissions.
Class/Interface | Method | Required permission |
---|---|---|
org.omg.CORBA.ORB | init | java.net.SocketPermission resolve |
org.omg.CORBA.ORB | connect | java.net.SocketPermission listen |
org.omg.CORBA.ORB | resolve_initial_references | java.net.SocketPermission connect |
org.omg.CORBA. portable.ObjectImpl | _is_a | java.net.SocketPermission connect |
org.omg.CORBA. portable.ObjectImpl | _non_existent | java.net.SocketPermission connect |
org.omg.CORBA. portable.ObjectImpl | OutputStream _request (String, boolean) | java.net.SocketPermission connect |
org.omg.CORBA. portable.ObjectImpl | _get_interface_def | java.net.SocketPermission connect |
org.omg.CORBA. Request | invoke | java.net.SocketPermission connect |
org.omg.CORBA. Request | send_deferred | java.net.SocketPermission connect |
org.omg.CORBA. Request | send_oneway | java.net.SocketPermission connect |
javax.rmi. PortableRemoteObject | narrow | java.net.SocketPermission connect |
ORB implementation classes
A list of the ORB implementation classes.
The ORB implementation classes in this release are:
- org.omg.CORBA.ORBClass=com.ibm.CORBA.iiop.ORB
- org.omg.CORBA.ORBSingletonClass=com.ibm.rmi.corba.ORBSingleton
- javax.rmi.CORBA.UtilClass=com.ibm.CORBA.iiop.UtilDelegateImpl
- javax.rmi.CORBA.StubClass=com.ibm.rmi.javax.rmi.CORBA.StubDelegateImpl
-
javax.rmi.CORBA.PortableRemoteObjectClass
=com.ibm.rmi.javax.rmi.PortableRemoteObject
These are the default values, and you are advised not to set these properties or refer to the implementation classes directly. For portability, make references only to the CORBA API classes, and not to the implementation. These values might be changed in future releases.
RMI over IIOP
Java Remote Method Invocation (RMI) provides a simple mechanism for distributed Java programming. RMI over IIOP (RMI-IIOP) uses the Common Object Request Broker Architecture (CORBA) standard Internet Inter-ORB Protocol (IIOP) to extend the base Java RMI to perform communication. This allows direct interaction with any other CORBA Object Request Brokers (ORBs), whether they were implemented in Java or another programming language.
The following documentation is available:
- The RMI-IIOP Programmer's Guide is an introduction to writing RMI-IIOP programs.
- The demo directory contains:
- A "Hello World" example that can switch between the Java Remote Method Protocol (JRMP) and IIOP protocols (demo\rmi-iiop\hello)
- A "Hello World" example that interacts with a standard Interface Description Language (IDL) program (demo\rmi-iiop\idl)
- The Java Language to IDL Mapping document is a detailed technical specification of RMI-IIOP: http://www.omg.org/cgi-bin/doc?ptc/00-01-06.pdf.
Implementing the Connection Handler Pool for RMI
Thread pooling for RMI Connection Handlers is not enabled by default.
About this task
To enable the connection pooling implemented at the RMI TCPTransport level, set the option
-Dsun.rmi.transport.tcp.connectionPool=true
This version of the Runtime Environment does not have a setting that you can use to limit the number of threads in the connection pool.
Enhanced BigDecimal
From Java 5.0, the IBM BigDecimal class has been adopted by Oracle as java.math.BigDecimal. The com.ibm.math.BigDecimal class is reserved for possible future use by IBM and is currently deprecated. Migrate existing Java code to use java.math.BigDecimal.
The new java.math.BigDecimal uses the same methods as both the previous java.math.BigDecimal and com.ibm.math.BigDecimal. Existing code using java.math.BigDecimal continues to work correctly. The two classes do not serialize.
To migrate existing Java code to use the java.math.BigDecimal class, change the import statement at the top of your .java file from: import com.ibm.math.*; to import java.math.*;.
Support for the Java Attach API
Your application can connect to another "target" virtual machine using the Java Attach API. Your application can then load an agent application into the target virtual machine, for example to perform tasks such as monitoring status.
Code for agent applications, such as JMX agents or JVMTI agents, is normally loaded during virtual machine startup by specifying special startup parameters. Requiring startup parameters might not be convenient for using agents on applications that are already running, such as WebSphere Application Servers. You can use the Java Attach API to load an agent at any time, by specifying the process ID of the target virtual machine. The Attach API capability is sometimes called the "late attach" capability.
The Attach API is disabled by default for Java 5 SR 11 and later.
Security considerations
The Java Attach API creates files and directories in a common directory. On Windows, security of the common directory and its subdirectories and files is handled by Windows security mechanisms. This means that only the process owner can connect to their processes.
You must secure access to the Java Attach API capability to ensure that only authorized users or processes can connect to another virtual machine. If you do not intend to use the Java Attach API capability, disable this feature using a Java system property. Set the com.ibm.tools.attach.enable system property to the value no; for example:
-Dcom.ibm.tools.attach.enable=no
The Attach API can be enabled by setting the com.ibm.tools.attach.enable system property to the value yes; for example:
-Dcom.ibm.tools.attach.enable=yes
Using the Java Attach API
By default, the target virtual machine is identified by its process ID. To use a different target, change the system property com.ibm.tools.attach.id; for example:
-Dcom.ibm.tools.attach.id=<process_ID>
The target process also has a human-readable "display name". By default, the display name is the process ID. To change the default display name, use the com.ibm.tools.attach.displayName system property. The ID and display name cannot be changed after the application has started.
The Attach API creates working files in a common directory called .com_ibm_tools_attach, which is created in the system temporary directory. The system property java.io.tmpdir holds the value of the system temporary directory. On Windows systems, the system temporary directory is typically C:\Documents and Settings\<userid>\Local Settings\Temp. To modify the working directory, use the Java system property com.ibm.tools.attach.directory; for example:
-Dcom.ibm.tools.attach.directory=C:\working
The directory must be located on a local drive. Specifying a network mounted file system might result in incorrect behavior.
If your Java application ends abnormally, for example, following a crash or a SIGKILL signal, the process subdirectory is not deleted. The Java VM detects and removes obsolete subdirectories where possible. The subdirectory can also be deleted by the owning user ID.
On heavily loaded system, applications might experience timeouts when attempting to connect to target applications. The default timeout is 120 seconds. Use the com.ibm.tools.attach.timeout system property to specify a different timeout value in milliseconds. For example, to timeout after 60 seconds:
-Dcom.ibm.tools.attach.timeout=60000
A timeout value of zero indicates an indefinite wait.
For JMX applications, you can disable authentication by editing the <JAVA_HOME>/jre/lib/management/management.properties file. Set the following properties to disable authentication in JMX:
com.sun.management.jmxremote.authenticate=false com.sun.management.jmxremote.ssl=false
An unsuccessful attempt to start the Attach API results in one of the following exceptions:
- com.ibm.tools.attach.AgentLoadException
- com.ibm.tools.attach.AgentInitializationException
- com.ibm.tools.attach.AgentNotSupportedException
- java.io.IOException
A useful reference for information about the Attach API can be found at http://download.oracle.com/javase/6/docs/technotes/guides/attach/index.html. The IBM implementation of the Attach API corresponds approximately to the Oracle Corporation implementation. However, if your application originally used com.sun.tools.attach.* methods or classes, you must modify and recompile the application to use the com.ibm.tools.attach.* implementation.
public void loadAgent(String agent) public void loadAgent(String agent, String options)are not available.
Applet Viewer
The Java plug-in is used to run Java applications in the browser. The appletviewer is used to test applications designed to be run in a browser.
Working with applets
With the Applet Viewer, you can run one or more applets that are called by reference in a Web page (HTML file) by using the <APPLET> tag. The Applet Viewer finds the <APPLET> tags in the HTML file and runs the applets, in separate windows, as specified by the tags.
Because the Applet Viewer is for viewing applets, it cannot display a whole Web page that contains many HTML tags. It parses only the <APPLET> tags and no other HTML on the Web page.
Running and debugging applets with the Applet Viewer
Use the following commands to run and debug an applet with the Applet Viewer.
Procedure
- To run an applet with the Applet Viewer, enter the following
command: appletviewer <name>.
<name> is one of the following:
- The file name of an HTML file that calls an applet.
- The URL of a Web page that calls an applet.
For example, to start the Applet Viewer on an HTML file that calls an applet, type at a command prompt:
appletviewer <demo>\GraphLayout\example1.html
Where <demo> is replaced by the full path into which you unzipped the demo package.
To start the Applet Viewer on a Web page, type at a command prompt:
appletviewer http://java.sun.com/applets/jdk/1.4/demo/applets/NervousText/ example1.html
The Applet Viewer does not recognize the charset option of the <
META
> tag. If the file that the Applet Viewer loads is not encoded as the system default, an I/O exception might occur. To avoid the exception, use the -encoding option when you run appletviewer. For example:
appletviewer -encoding JISAutoDetect sample.html
- To debug an applet with the Applet Viewer, use the debug parameter
with the appletviewer command.
For example:
cd <demo>\TicTacToe appletviewer -debug example1.html
Where <demo> is replaced by the full path into which you unzipped the demo package.
You can find documentation about how to debug applets using the Applet Viewer at the Oracle Web site: http://download.oracle.com/javase/1.5.0/docs/guide/plugin/developer_guide/debugger.html.
Distributing Java applications
Java applications typically consist of class, resource, and data files.
When you distribute a Java application, your software package probably consists of the following parts:
- Your own class, resource, and data files
- An installation procedure or program
To run your application, a user needs the Runtime Environment for Windows. The SDK for Windows software contains a Runtime Environment. However, you cannot assume that your users have the SDK for Windows software installed.
Your SDK for Windows software license does not allow you to redistribute any of the SDK's files with your application. You must ensure that a licensed version of the SDK for Windows is installed on the target workstation.
Class data sharing between JVMs
Class data sharing enables multiple JVMs to share a single space in memory.
You can share data between Java Virtual Machines (JVMs) by storing it in a cache in shared memory. Sharing reduces the overall virtual storage consumption when more than one JVM shares a cache. Sharing also reduces the startup time for a JVM after the cache has been created. The shared class cache is independent of any active JVM and persists beyond the lifetime of the JVM that created the cache.
A shared cache can contain:
- Bootstrap classes
- Application classes
- Metadata that describes the classes
Overview of class data sharing
Class data sharing provides a method of reducing memory footprint and improving JVM start-up time.
Enabling class data sharing
Enable class data sharing by using the -Xshareclasses option when starting a JVM. The JVM connects to an existing cache or creates a new cache if one does not exist.
All bootstrap and application classes loaded by the JVM are shared by default. Custom class loaders share classes automatically if they extend the application class loader. Otherwise, they must use the Java Helper API provided with the JVM to access the cache. See Adapting custom class loaders to share classes.
Cache access
Any JVM connected to a cache can update the cache. Any number of JVMs can concurrently read from the cache, even while another JVM is writing to it.
You must take care if runtime bytecode modification is being used. See Runtime bytecode modification for more information.
Dynamic updating of the cache
The shared class cache persists beyond the lifetime of any JVM. Therefore, the cache is updated dynamically to reflect any modifications that might have been made to JARs or classes on the file system. The dynamic updating makes the cache independent of the application using it.
Cache security
Access to the shared class cache is limited by operating system permissions and Java security permissions. Only a class loader that has registered to share class data can update the shared class cache.
If a Java SecurityManager is installed, classloaders, excluding the default bootstrap, application, and extension class loaders, must be granted permission to share classes. Grant permission by adding SharedClassPermission lines to the java.policy file. See Using SharedClassPermission for more information. The RuntimePermission createClassLoader restricts the creation of new class loaders and therefore also restricts access to the cache.
Cache lifespan
Multiple caches can exist on a system and you specify them by name as a suboption to the -Xshareclasses command. A JVM can connect to only one cache at any one time.
You can override the default cache size on startup using -Xscmx<n><size>. This size is then fixed for the lifetime of the cache. Caches exist until they are explicitly deleted using a suboption to the -Xshareclasses command or until the system is rebooted.
Cache utilities
All cache utilities are suboptions to the -Xshareclasses command. See Class data sharing command-line options or use -Xshareclasses:help to see a list of available suboptions.
Class data sharing command-line options
Class data sharing and the cache management utilities are controlled using command-line options to the Java launcher.
For options that take a <size> parameter, suffix the number with "k" or "K" to indicate kilobytes, "m" or "M" to indicate megabytes, or "g" or "G" to indicate gigabytes.
- -Xscmx<size>
- Specifies cache size. This option applies only if a cache is being created and no cache of the same name exists. The default cache size is platform-dependent. You can find out the size value being used by adding -verbose:sizes as a command-line argument. The minimum cache size is 4 KB. The maximum cache size is also platform-dependent. (See Cache size limits.)
- -Xshareclasses:<suboption>[,<suboption>...]
- Enables class data sharing. Can take a number of suboptions, some
of which are cache utilities. Cache utilities perform the required
operation on the specified cache, without starting the VM. You can
combine multiple suboptions, separated by commas, but the cache utilities
are mutually exclusive. When running cache utilities, the message Could
not create the Java virtual
machine is expected. Cache utilities do not create the virtual
machine.
You can use the following suboptions with the -Xshareclasses option:
- help
- Lists all the command-line suboptions.
- name=<name>
- Connects to a cache of a given name, creating the cache if it does not already exist. Also used to indicate the cache that is to be modified by cache utilities; for example, destroy. Use the listAllCaches utility to show which named caches are currently available. If you do not specify a name, the default name "sharedcc_%u" is used. %u in the cache name inserts the current user name.
- verbose
- Enables verbose output, which provides overall status on the shared class cache and more detailed error messages.
- verboseIO
- Gives detailed output on the cache I/O activity, listing information on classes being stored and found. Each class loader is given a unique ID (the bootstrap loader is always 0) and the output shows the class loader hierarchy at work, where class loaders must ask their parents for a class before they can load it themselves. It is usual to see many failed requests; this behavior is expected for the class loader hierarchy.
- verboseHelper
- Enables verbose output for the Java Helper API. This output shows you how the Helper API is used by your class loader.
- silent
- Turns off all shared classes messages, including error messages. Unrecoverable error messages, which prevent the JVM from initializing, are displayed.
- nonfatal
- Allows the JVM to start even if class data sharing fails. Normal behavior for the JVM is to refuse to start if class data sharing fails. If you select nonfatal and the shared classes cache fails to initialize, the JVM starts without class data sharing.
- none
- Can be added to the end of a command line to disable class data sharing. This suboption overrides class sharing arguments found earlier on the command line.
- modified=<modified context>
- Used when a JVMTI agent is installed that might modify bytecode at runtime. If you do not specify this suboption and a bytecode modification agent is installed, classes are safely shared with an extra performance cost. The <modified context> is a descriptor chosen by the user; for example, "myModification1". This option partitions the cache, so that only JVMs using context myModification1 can share the same classes. For instance, if you run HelloWorld with a modification context and then run it again with a different modification context, all classes are stored twice in the cache. See Runtime bytecode modification for more information.
- destroy (Utility option)
- Destroys a cache using the name specified in the name=<name> suboption. If the name is not specified, the default cache is destroyed. A cache can be destroyed only if all VMs using it have shut down, and the user has sufficient permissions.
- destroyAll (Utility option)
- Tries to destroy all caches available to the user. A cache can be destroyed only if all VMs using it have shut down, and the user has sufficient permissions.
- expire=<time in minutes>
- Destroys all caches that have been unused for the time specified before loading shared classes. This option is not a utility option because it does not cause the JVM to exit. On NTFS file systems, the expire option is accurate to the nearest hour.
- listAllCaches (Utility option)
- Lists all the caches on the system, describing if they are in use and when they were last used.
- printStats (Utility option)
- Displays summary statistics information about the cache specified in the name=<name> suboption. If the name is not specified, statistics are displayed about the default cache. The most useful information displayed is how full the cache is and how many classes it contains. Stale classes are classes that have been updated on the file system and which the cache has therefore marked "stale". Stale classes are not purged from the cache and can be reused. See the Diagnostics Guide for more information.
- printAllStats (Utility option)
- Displays detailed information for the cache specified
by the name suboption. Every class is listed
in chronological order, with a reference to the location from which
it was loaded.
See the Diagnostics Guide for more information.
Creating, populating, monitoring, and deleting a cache
An overview of the life-cycle of a shared class data cache including examples of the cache management utilities.
To enable class data sharing, add -Xshareclasses[:name=<name>] to your application command line.
The JVM either connects to an existing cache of the given name or creates a new cache of that name. If a new cache is created, it is populated with all bootstrap and application classes being loaded until the cache becomes full. If two or more JVMs are started concurrently, they populate the cache concurrently.
To check that the cache has been created, run java -Xshareclasses:listAllCaches. To see how many classes and how much class data is being shared, run java -Xshareclasses:[name=<name>],printStats. You can run these utilities after the application JVM has terminated or in another command window.
For more feedback on cache usage while the JVM is running, use the verbose suboption. For example, java -Xshareclasses:[name=<name>],verbose.
To see classes being loaded from the cache or stored in the cache, add -Xshareclasses:[name=<name>],verboseIO to your application command line.
To delete the cache, run java -Xshareclasses:[name=<name>],destroy. You usually delete caches only if they contain many stale classes or if the cache is full and you want to create a bigger cache.
You should tune the cache size for your specific application, because the default is unlikely to be the optimum size. To determine the optimum cache size, specify a large cache, using -Xscmx, run the application, and then use printStats to determine how much class data has been stored. Add a small amount to the value shown in printStats for contingency. Because classes can be loaded at any time during the lifetime of the JVM, it is best to do this analysis after the application has terminated. However, a full cache does not have a negative affect on the performance or capability of any JVMs connected to it, so it is acceptable to decide on a cache size that is smaller than required.
If a cache becomes full, a message is displayed on the command line of any JVMs using the verbose suboption. All JVMs sharing the full cache then loads any further classes into their own process memory. Classes in a full cache can still be shared, but a full cache is read-only and cannot be updated with new classes.
Performance and memory consumption
Class data sharing is particularly useful on systems that use more than one JVM running similar code; the system benefits from reduced virtual storage consumption. It is also useful on systems that frequently start and shut down JVMs, which benefit from the improvement in startup time.
The processor and memory usage required to create and populate a new cache is minimal. The JVM startup cost in time for a single JVM is typically between 0 and 5% slower compared with a system not using class data sharing, depending on how many classes are loaded. JVM startup time improvement with a populated cache is typically between 10% and 40% faster compared with a system not using class data sharing, depending on the operating system and the number of classes loaded. Multiple JVMs running concurrently show greater overall startup time benefits.
Duplicate classes are consolidated in the shared class cache. For example, class A loaded from myClasses.jar and class A loaded from myOtherClasses.jar (with identical content) is stored only once in the cache. The printAllStats utility shows multiple entries for duplicated classes, with each entry pointing to the same class.
When you run your application with class data sharing, you can use the operating system tools to see the reduction in virtual storage consumption.
Considerations and limitations of using class data sharing
Consider these factors when deploying class data sharing in a product and using class data sharing in a development environment.
Cache size limits
The maximum theoretical cache size is 2 GB. The size of the cache you can specify is limited by the amount of available disk space and available virtual address space.
The cache is limited by the following factors:
- Available disk space. A file is created to store the class data in a directory called javasharedresources. This directory is created in the user's profile directory, which is typically C:\Documents and Settings\<username>\Local Settings\Application Data\javasharedresources\. The shared file is deleted every time Windows is restarted.
- Available virtual address space. Because the virtual address space of a process is shared between the shared classes cache and the Java heap, increasing the maximum size of the Java heap reduces the size of the shared classes cache you can create.
Runtime bytecode modification
Any JVM using a JVM Tool Interface (JVMTI) agent that can modify bytecode data must use the modified=<modified_context> suboption if it wants to share the modified classes with another JVM.
The modified context is a user-specified descriptor that describes the type of modification being performed. The modified context partitions the cache so that all JVMs running under the same context share a partition.
This partitioning allows JVMs that are not using modified bytecode to safely share a cache with those that are using modified bytecode. All JVMs using a given modified context must modify bytecode in a predictable, repeatable manner for each class, so that the modified classes stored in the cache have the expected modifications when they are loaded by another JVM. Any modification must be predictable because classes loaded from the shared class cache cannot be modified again by the agent.
If a JVMTI agent is used without a modification context, classes are still safely shared by the JVM, but with a small affect on performance. Using a modification context with a JVMTI agent avoids the need for extra checks and therefore has no affect on performance. A custom ClassLoader that extends java.net.URLClassLoader and modifies bytecode at load time without using JVMTI automatically stores that modified bytecode in the cache, but the cache does not treat the bytecode as modified. Any other VM sharing that cache loads the modified classes. You can use the modified=<modification_context> suboption in the same way as with JVMTI agents to partition modified bytecode in the cache. If a custom ClassLoader needs to make unpredictable load-time modifications to classes, that ClassLoader must not attempt to use class data sharing.
See the Diagnostics Guide for more detail on this topic.
Operating system limitations
You cannot share classes between 32-bit and 64-bit JVMs. Temporary disk space must be available to hold cache information. The operating system enforces cache permissions.
For operating systems that can run both 32-bit and 64-bit applications, class data sharing is not permitted between 32-bit and 64-bit JVMs. The listAllCaches suboption lists 32-bit or 64-bit caches, depending on the address mode of the JVM being used.
The shared class cache requires disk space to store identification information about the caches that exist on the system. This information is in the user profile directory. If the identification information directory is deleted, the JVM cannot identify the shared classes on the system and must re-create the cache.
The operating system enforces the permissions for accessing a shared class cache. If you do not specify a cache name, the user name is appended to the default name so that multiple users on the same system create their own caches by default.
Using SharedClassPermission
If a SecurityManager is being used with class data sharing and the running application uses its own class loaders, you must grant these class loaders shared class permissions before they can share classes.
You add shared class permissions to the java.policy file using the ClassLoader class name (wildcards are permitted) and either "read", "write", or "read,write" to determine the access granted. For example:
permission com.ibm.oti.shared.SharedClassPermission "com.abc.customclassloaders.*", "read,write";
If a ClassLoader does not have the correct permissions, it is prevented from sharing classes. You cannot change the permissions of the default bootstrap, application, or extension class loaders.
Adapting custom class loaders to share classes
Any class loader that extends java.net.URLClassLoader can share classes without modification. You must adopt class loaders that do not extend java.net.URLClassLoader to share class data.
You must grant all custom class loaders shared class permissions if a SecurityManager is being used; see Using SharedClassPermission. IBM provides several Java interfaces for various types of custom class loaders, which allow the class loaders to find and store classes in the shared class cache. These classes are in the com.ibm.oti.shared package.
The Javadoc document for this package is provided with the SDK in the docs/apidoc.zip file.
See the Diagnostics Guide for more information about how to use these interfaces.
Java Communications API (JavaComm)
The Java Communications (API) package (JavaComm) is an optional package provided for use with the Runtime Environment for Windows. You install JavaComm independently of the SDK or Runtime Environment.
The JavaComm API gives Java applications a platform-independent way of performing serial and parallel port communications for technologies such as voice mail, fax, and smartcards.
The Java Communications API supports Electronic Industries Association (EIA)-232 (RS232) serial ports and Institute of Electrical and Electronics Engineers (IEEE) 1284 parallel ports and is supported on systems with the IBM Version 5.0 Runtime Environment.
Using the Java Communications API, you can:
- List ports on a system
- Open and claim ownership of ports
- Resolve port ownership contention among applications that use Java Communications API
- Perform asynchronous and synchronous I/O port-monitoring using event notification
- Receive bean-style events describing state changes on the port
Installing Java Communications API from a compressed file
Make sure that the SDK or Runtime Environment is installed before you install the Java Communications API.
About this task
To install the Java Communications API from a compressed file:
Procedure
- Put the Java Communications API compressed file, ibm-java2-javacomm-50-win-x86_64.zip, in the directory where the SDK or Runtime Environment is installed. If you installed to the default directory, this is C:\Program Files\IBM\Java50\.
- Extract the compressed file. The Java Communications API is extracted into subdirectories in the existing directory.
Configuring the Java Communications API
To use the Java Communications API, you must change the access mode of serial and parallel ports, and set the PATH if you did not set it when you installed Java.
About this task
See Setting the path.
Specifying devices in the javax.comm.properties file
Use the javax.comm.properties file to specify the drivers that are available to the Java Communications API and whether they are parallel or serial. Do not change this file without a very clear understanding of its use.
About this task
Port numbers are allocated sequentially to all devices. For example, if you specify /dev/ttyS=PORT_SERIAL and the devices /dev/ttyS0 and /dev/ttyS1 exist, they will be allocated COM1 and COM2.
To use the USB-serial connectors, uncomment the line /dev/ttyUSB=PORT_SERIAL in the javax.comm.properties file. If the devices /dev/ttyUSB0 and /dev/ttyUSB1 exist and COM1 and COM2 have already been defined, the USB-serial devices are allocated the next sequential ports, COM3 and COM4.
Printing limitation with the Java Communications API
When printing with the Java Communications API, you might have to select "Form feed", "Continue", or a similar option on the printer.
Uninstalling Java Communications API
To uninstall the Java Communications API, delete the following files from the directory where you installed the Runtime Environment:
About this task
- jre\lib\ext\comm.jar
- jre\bin\ibmcomm.dll
- jre\lib\javax.comm.properties
- docs\javacomm\License.html
By default, the Runtime Environment is installed in the C:\Program Files\IBM\Java50\ directory.
The Java Communications API documentation
You can find API documentation and samples for the Java Communications API at the Oracle Web site.
http://www.oracle.com/technetwork/java/index-jsp-141752.html.
Service and support for independent software vendors
Contact points for service:
If you are entitled to services for the Program code pursuant to the IBM Solutions Developer Program, contact the IBM Solutions Developer Program through your usual method of access or on the Web at: http://www.ibm.com/partnerworld/.
If you have purchased a service contract (that is, the IBM Personal Systems Support Line or equivalent service by country), the terms and conditions of that service contract determine what services, if any, you are entitled to receive with respect to the Program.
Accessibility
The user guides that are supplied with this SDK and the Runtime Environment have been tested using screen readers.
To change the font sizes in the user guides, use the function that is supplied with your browser, typically found under the View menu option.
For users who require keyboard navigation, a description of useful keystrokes for Swing applications is in Swing Key Bindings at http://www.ibm.com/developerworks/java/jdk/additional/.
Keyboard traversal of JComboBox components in Swing
If you traverse the drop-down list of a JComboBox component with the cursor keys, the button or editable field of the JComboBox does not change value until an item is selected. This is the correct behavior for this release and improves accessibility and usability by ensuring that the keyboard traversal behavior is consistent with mouse traversal behavior.
JConsole accessibility
To enable JConsole to run on Windows with the Windows look and feel, set the swing.defaultlaf system property.
JConsole -J-Dswing.defaultlaf=com.sun.java.swing.plaf.windows.WindowsLookAndFeel
This will enable the High Contrast color schemes available in Windows to be adopted by JConsole.
General note about security
You can obtain JCE unrestricted jurisdiction policy files from http://www.ibm.com/developerworks/java/jdk/security/index.html. Documentation about the IBM security packages JCE, JCEFIPS, JSSE2, JSSEFIPS, JGSS, JAAS and hardware cryptography is also available at this Web site.
Any comments on this user guide?
If you have any comments about this user guide, contact us through one of the following channels. Note that these channels are not set up to answer technical queries, but are for comments about the documentation only.
Send your comments:
- By e-mail to idrcf@hursley.ibm.com.
- By fax:
- From the UK: 01962 842327
- From elsewhere: +44 1962 842327
- By mail to:
IBM United Kingdom Ltd
User Technologies,
Mail Point 095
Hursley Park
Winchester
Hampshire
SO21 2JN
United Kingdom
The fine print. By choosing to send a message to IBM, you acknowledge that all information contained in your message, including feedback data, such as questions, comments, suggestions, or the like, shall be deemed to be non-confidential and IBM shall have no obligation of any kind with respect to such information and shall be free to reproduce, use, disclose, and distribute the information to others without limitation. Further, IBM shall be free to use any ideas, concepts, know-how or techniques contained in such information for any purpose whatsoever, including, but not limited to, developing, manufacturing and marketing products incorporating such information.
Appendix A. Command-line options
You can specify the options on the command line while you are starting Java. They override any relevant environment variables. For example, using -cp <dir1> with the Java command completely overrides setting the environment variable CLASSPATH=<dir2>.
Specifying command-line options
Although the command line is the traditional way to specify command-line options, you can pass options to the JVM in other ways.
Use only single or double quotation marks for command-line options when explicitly directed to do so for the option in question. Single and double quotation marks have different meanings on different platforms, operating systems, and shells. Do not use '-X<option>' or "-X<option>". Instead, you must use -X<option>. For example, do not use '-Xmx500m' and "-Xmx500m". Write this option as -Xmx500m.
These precedence rules (in descending order) apply to specifying options:
- Command line.
For example, java -X<option> MyClass
- A file containing a list of options, specified using the -Xoptionsfile option
on the command line. For example, java -Xoptionsfile=myoptionfile.txt
MyClass
In the options file, specify each option on a new line; you can use the '\' character as a continuation character if you want a single option to span multiple lines. Use the '#' character to define comment lines. You cannot specify -classpath in an options file. Here is an example of an options file:
#My options file -X<option1> -X<option2>=\ <value1>,\ <value2> -D<sysprop1>=<value1>
- IBM_JAVA_OPTIONS environment variable. You can set command-line
options using this environment variable. The options that you specify
with this environment variable are added to the command line when
a JVM starts in that environment.
For example, set IBM_JAVA_OPTIONS=-X<option1> -X<option2>=<value1>
General command-line options
Use these options to print help on assert-related options, set the search path for application classes and resources, print a usage method, identify memory leaks inside the JVM, print the product version and continue, enable verbose output, and print the product version.
- -assert
- Prints help on assert-related options.
- -cp, -classpath <directories and compressed or jar files separated by : (; on Windows)>
- Sets the search path for application classes and resources. If -classpath and -cp are not used, and the CLASSPATH environment variable is not set, the user classpath is, by default, the current directory (.).
- -help, -?
- Prints a usage message.
- -memorycheck[:<option>]
- Identifies memory leaks inside the JVM using strict checks that
cause the JVM to exit on failure. If no option is specified, all is
used by default. Options are:
- all
- The default if -memorycheck only is used. This option enables checking of all allocated and freed blocks on every free and allocate call. This check of the heap is the most thorough. It causes the JVM to exit on nearly all memory-related problems soon after they are caused. This option has the greatest affect on performance.
- callsite=<number of allocations>
- Prints callsite information every <number of allocations>.
Deallocations are not counted. Callsite information is presented in
a table with separate information for each callsite. Statistics include
the number and size of allocation and free requests since the last
report, and the number of the allocation request responsible for the
largest allocation from each site. Callsites are presented as sourcefile:linenumber for
C code and assembly function name for assembler code.
Callsites that do not provide callsite information are accumulated into an "unknown" entry.
- Prints callsite information every <number of allocations>.
Deallocations are not counted. Callsite information is presented in
a table with separate information for each callsite. Statistics include
the number and size of allocation and free requests since the last
report, and the number of the allocation request responsible for the
largest allocation from each site. Callsites are presented as sourcefile:linenumber for
C code and assembly function name for assembler code.
- failat=<number of allocations>
- Causes memory allocation to fail (return NULL) after <number of allocations>. Setting <number of allocations> to 13 causes the 14th allocation to return NULL. Deallocations are not counted. Use this option to ensure that JVM code reliably handles allocation failures. This option is useful for checking allocation site behavior rather than setting a specific allocation limit.
- nofree
- Keeps a list of already used blocks instead of freeing memory. This list is checked, along with currently allocated blocks, for memory corruption on every allocation and deallocation. Use this option to detect a dangling pointer (a pointer that is "dereferenced" after its target memory is freed). This option cannot be reliably used with long-running applications (such as WebSphere Application Server), because "freed" memory is never reused or released by the JVM.
- quick
- Enables block padding only. Used to detect basic heap corruption. Pads every allocated block with sentinel bytes, which are verified on every allocate and free. Block padding is faster than the default of checking every block, but is not as effective.
- skipto=<number of allocations>
- Causes the program to check only on allocations that occur after <number of allocations>. Deallocations are not counted. Used to speed up JVM startup when early allocations are not causing the memory problem. As a rough estimate, the JVM performs 250+ allocations during startup.
- zero
- Newly allocated blocks are set 0 instead of being filled with the 0xE7E7xxxxxxxxE7E7 pattern. Setting to 0 helps you to determine whether a callsite is expecting zeroed memory (in which case after the allocation request by using the instruction memset(pointer, 0, size)).
- all
- -showversion
- Prints product version and continues.
- -verbose:<option>[,<option>...]
- Enables verbose output. Separate multiple options using commas.
These options are available:
- class
- Writes an entry to stderr for each class that is loaded.
- dynload
- Provides detailed information as each bootstrap class is loaded
by the JVM:
- The class name and package
- For class files that were in a .jar file, the name and directory path of the .jar
- Details of the size of the class and the time taken to load the class
<Loaded java/lang/String from C:\sdk\jre\lib\vm.jar> <Class size 17258; ROM size 21080; debug size 0> <Read time 27368 usec; Load time 782 usec; Translate time 927 usec>
- gc
- Provide verbose garbage collection information.
- init
- Writes information to stderr describing JVM initialization and termination.
- jni
- Writes information to stderr describing the JNI services called by the application and JVM.
- sizes
- Writes information to stderr describing the active memory usage settings.
- stack
- Writes information to stderr describing the Java and C stack usage for each thread.
- -version
- Prints product version.
System property command-line options
Use the system property command-line options to set up your system.
- -D<name>=<value>
- Sets a system property.
- -DCLONE_HASHTABLE_FOR_SYNCHRONIZATION
- Deadlocks can occur when serializing multiple java.util.Hashtables that refer to each other in different threads at the same time. Using this command-line option can resolve the deadlock, by forcing the JVM to take a copy of every java.util.Hashtable before this hashtable is serialized. Because this process requires temporary storage, and uses additional processing power, the option is not enabled by default.
- -Dcom.ibm.jsse2.renegotiate=[ALL | NONE | ABBREVIATED]
- If your Java application
uses JSSE for secure communication, you can disable TLS renegotiation
by installing APAR IZ65239.
- ALL
- Allow both abbreviated and unabbreviated (full) renegotiation handshakes.
- NONE
- Allow no renegotiation handshakes. This value is the default setting.
- ABBREVIATED
- Allow only abbreviated renegotiation handshakes.
- -Dcom.ibm.lang.management.verbose
- Enables verbose information from java.lang.management operations to be written to output channel during VM operation.
-Dcom.ibm.IgnoreMalformedInput=true
From Java 5 SR12, any invalid UTF8 or malformed byte sequences are replaced with the standard unicode replacement character \uFFFD. To retain the old behavior, where invalid UTF8 or malformed byte sequences are ignored, set this system property to true.
- -Dcom.ibm.mappedByteBufferForce=[true | false]
- During system failure, the MappedByteBuffer.force API does not commit data to disk, which prevents data integrity issues. Setting this value to true forces data to be committed to disk during system failure. Because this setting can cause performance degradation, this switch is disabled by default.
- -Dcom.ibm.nio.DirectByteBuffer.AggressiveMemoryManagement=true
- Use this property to increase dynamically the native memory limit for Direct Byte Buffers, based on their usage. This option is applicable when a Java application uses many Direct Byte Buffer objects, but cannot predict the maximum native memory consumption of the objects. Do not use the -Xsun.nio.MaxDirectMemorySize option with this property.
-Dcom.ibm.nio.useIBMAlias=true
The IBM JVM cannot display all the Big5-HKSCS characters when using the NIO converter. By specifying the -Dcom.ibm.nio.useIBMAlias=true option, you can use the ICU4J API to display Big5-HKSCS characters without modifying the application.
- -Dcom.ibm.tools.attach.enable=yes
- Enable the Attach API for this application. The Attach API allows your application to connect to a virtual machine. Your application can then load an agent application into the virtual machine. The agent can be used to perform tasks such as monitoring the virtual machine status.
-Dcom.ibm.zipfile.closeinputstreams=true
The Java.util.zip.ZipFile class allows you to create InputStreams on files held in a compressed archive. Under some conditions, using ZipFile.close() to close all InputStreams that have been opened on the compressed archive might result in a 56-byte-per-InputStream native memory leak. Setting the -Dcom.ibm.zipfile.closeinputstreams=true forces the JVM to track and close InputStreams without the memory impact caused by retaining native-backed objects. Native-backed objects are objects that are stored in native memory, rather than the Java heap. By default, the value of this system property is false.
- -Dibm.jvm.bootclasspath
- The value of this property is used as an additional search path, which is inserted between any value that is defined by -Xbootclasspath/p: and the bootclass path. The bootclass path is either the default or the one that you defined by using the -Xbootclasspath: option.
- -Dibm.stream.nio=[true | false]
- From v1.4.1 onwards, by default the IO converters are used. This option addresses the ordering of IO and NIO converters. When this option is set to true, the NIO converters are used instead of the IO converters.
- -Djava.compiler=[NONE | j9jit23]
- Disables the Java compiler by setting to NONE. Enable JIT compilation by setting to j9jit23 (Equivalent to -Xjit).
-Dsun.awt.keepWorkingSetOnMinimize=true
When a Java application using the Abstract Windowing Toolkit (AWT) is minimized, the default behavior is to "trim" the "working set". The working set is the application memory stored in RAM. Trimming means that the working set is marked as being available for swapping out if the memory is required by another application. The advantage of trimming is that memory is available for other applications. The disadvantage is that a "trimmed" application might experience a delay as the working set memory is brought back into RAM.
The -Dsun.awt.keepWorkingSetOnMinimize=true system property stops the JVM trimming an application when it is minimized. The default behavior is to trim an application when it is minimized.
- -Dsun.net.client.defaultConnectTimeout=<value in milliseconds>
- Specifies the default value for the connect timeout for the protocol
handlers used by the java.net.URLConnection class. The default value
set by the protocol handlers is -1, which means that no timeout is
set.
When a connection is made by an applet to a server and the server does not respond properly, the applet might seem to hang. The delay might also cause the browser to hang. The apparent hang occurs because there is no network connection timeout. To avoid this problem, the Java Plug-in has added a default value to the network timeout of 2 minutes for all HTTP connections. You can override the default by setting this property.
- -Dsun.net.client.defaultReadTimeout=<value in milliseconds>
- Specifies the default value for the read timeout for the protocol handlers used by the java.net.URLConnection class when reading from an input stream when a connection is established to a resource. The default value set by the protocol handlers is -1, which means that no timeout is set.
- -Dsun.nio.MaxDirectMemorySize=<value in bytes>
- Limits the native memory size for nio Direct Byte Buffer objects to the value specified.
- -Dsun.rmi.transport.tcp.connectionPool=[true | any non-null value]
- Enables thread pooling for the RMI ConnectionHandlers in the TCP transport layer implementation.
- -Dsun.timezone.ids.oldmapping=[true | false]
- From v5.0 Service Refresh 1 onwards, the Java Virtual Machine uses new time zone identifiers. The identifiers change the definitions of Eastern Standard Time (EST) and Mountain Standard Time (MST). These new definitions do not take daylight saving time (DST) into account. If this property is set to true, the definitions for EST and MST revert to the definitions that were used before v5.0 Service Refresh 1, and DST is taken into account. By default, this property is set to true.
- -Dswing.useSystemFontSettings=[false]
- From v1.4.1 onwards, by default, Swing programs running with the Windows Look and Feel render with the system font set by the user instead of a Java-defined font. As a result, fonts for v1.4.1 differ from the fonts in earlier releases. This option addresses compatibility problems like these for programs that depend on the old behavior. By setting this option, v1.4.1 fonts and those of earlier releases are the same for Swing programs running with the Windows Look and Feel.
JVM command-line options
Use these options to configure your JVM. The options prefixed with -X are nonstandard.
For options that take a <size> parameter, suffix the number with "k" or "K" to indicate kilobytes, "m" or "M" to indicate megabytes, or "g" or "G" to indicate gigabytes.
For options that take a <percentage> parameter, use a number from 0 to 1. For example, 50% is 0.5.
Options that relate to the JIT are listed under JIT command-line options. Options that relate to the Garbage Collector are listed under Garbage Collector command-line options.
- -X
- Displays help on nonstandard options.
- -Xargencoding
- You can put Unicode escape sequences in the argument list. This option is set to off by default.
- -Xbootclasspath:<directories and compressed or Java archive files separated by : (; on Windows)>
- Sets the search path for bootstrap classes and resources. The default is to search for bootstrap classes and resources in the internal VM directories and .jar files.
- -Xbootclasspath/a:<directories and compressed or Java archive files separated by : (; on Windows)>
- Appends the specified directories, compressed files, or jar files to the end of the bootstrap class path. The default is to search for bootstrap classes and resources in the internal VM directories and .jar files.
- -Xbootclasspath/p:<directories and compressed or Java archive files separated by : (; on Windows)>
- Adds a prefix of the specified directories, compressed files, or Java archive files to the front of the bootstrap class path. Do not deploy applications that use the -Xbootclasspath: or the -Xbootclasspath/p: option to override a class in the standard API. The reason is that such a deployment contravenes the Java 2 Runtime Environment binary code license. The default is to search for bootstrap classes and resources in the internal VM directories and .jar files.
- -Xcheck:jni[:help][:<option>=<value>]
- Performs additional checks for JNI functions. This option is equivalent to -Xrunjnichk. By default, no checking is performed.
- -Xclassgc
- Enables dynamic unloading of classes by the JVM. This unloading is the default behavior. To disable dynamic class unloading, use the -Xnoclassgc option.
- -Xdbg:<options>
- Loads debugging libraries to support the remote debugging of applications. This option is equivalent to -Xrunjdwp. By default, the debugging libraries are not loaded, and the VM instance is not enabled for debug.
- -Xdbginfo:<path to symbol file>
- Loads and passes options to the debug information server. By default, the debug information server is disabled.
- -Xdebug
- This option is deprecated. Use -Xdbg for debugging.
- -Xdiagnosticscollector[:settings=<filename>]
- Enables the Diagnostics Collector. See the Diagnostics Guide (http://www.ibm.com/developerworks/java/jdk/diagnosis/50.html) section on "The Diagnostics Collector" for more information. The settings option allows you to specify a different Diagnostics Collector settings file to use instead of the default dc.properties file in the JRE.
- -Xdisablejavadump
- Turns off Javadump generation on errors and signals. By default, Javadump generation is enabled.
- -Xdump
- See the Diagnostics Guide (http://www.ibm.com/developerworks/java/jdk/diagnosis/50.html) section on "Using dump agents" for more information.
- -Xenableexplicitgc
- Signals to the VM that calls to System.gc() trigger a garbage collection. This option is enabled by default.
- -Xfuture
- Turns on strict class-file format checks. Use this flag when you are developing new code because stricter checks will become the default in future releases. By default, strict format checks are disabled.
- -Xiss<size>
- Sets the initial stack size for Java threads. By default, the stack size is set to 2 KB. Use the -verbose:sizes option to output the value that the VM is using.
- -Xjarversion
- Produces output information about the version of each jar file in the class path, the boot class path, and the extensions directory. Version information is taken from the Implementation-Version and Build-Level properties in the manifest of the jar.
- -Xjni:<suboptions>
- Sets JNI options. You can use the following suboption with the -Xjni option:
- -Xjni:arrayCacheMax=[<size in bytes>|unlimited]
- Sets the maximum size of the array cache. The default size is 8096 bytes.
- -Xlinenumbers
- Displays line numbers in stack traces for debugging. See also -Xnolinenumbers. By default, line numbers are on.
- -XlockReservation
- Enables an optimization that presumes a monitor is owned by the thread that last acquired it. The optimization minimizes the runtime cost of acquiring and releasing a monitor for a single thread if the monitor is rarely acquired by multiple threads.
- -Xlog
-
Enables message logging. To prevent message logging, use the -Xlog:none option. By default, logging is enabled. This option is available from Java 5 SR10. See Messages.
- -Xlp<size> (AIX®, Windows, and Linux (x86, PPC32, PPC64, AMD64, EM64T))
- Windows: Requests the JVM to allocate
the Java heap with large pages. This command is available only on Windows Server 2003, Windows Vista, and Windows Server 2008. To use large pages,
the user that runs Java must
have the authority to "lock pages in memory". To enable this authority,
as Administrator go to Control Panel > Administrative Tools > Local Security
Policy and then find Local
Policies > User Rights Assignment > Lock pages in memory. Add the
user who runs the Java process,
and reboot your machine. For more information, see these websites:
- http://technet2.microsoft.com/WindowsServer/en/library/e72dcdf6-fe17-49dd-a382-02baad31a1371033.mspx
- http://msdn.microsoft.com/en-us/library/aa366720(VS.85).aspx
- http://msdn.microsoft.com/en-us/library/aa366568(VS.85).aspx
Note: On Microsoft Windows Vista and Windows 2008, use of large pages is affected by the User Account Control (UAC) feature. When UAC is enabled, a regular user (a member of the Users group) can use the -Xlp option as normal. However, an administrative user (a member of the Administrators group) must run the application as an administrator to gain the privileges required to lock pages in memory. To run as administrator, right-click the application and select Run as administrator. If the user does not have the necessary privileges, an error message is produced, advising that the System configuration does not support option '-Xlp'. - -Xmso<size>
Sets the initial stack size for operating system threads. The default value can be determined by running the command:
java -verbose:sizes
The maximum value for the stack size varies according to platform and specific machine configuration. If you exceed the maximum value, a java/lang/OutOfMemoryError message is reported.- -Xmxcl<number>
- Sets the maximum number of class loaders. See the Diagnostics Guide (http://www.ibm.com/developerworks/java/jdk/diagnosis/50.html) section on "The parent-delegation model" for a description of a problem that can occur on some JVMs if this number is set too low.
- -Xnoagent
- Disables support for the old JDB debugger.
- -Xnoclassgc
- Disables dynamic class unloading. This option disables the release of native and Java heap storage associated with Java class loaders and classes that are no longer being used by the JVM. The default behavior is as defined by -Xclassgc. Enabling this option is not recommended except under the direction of the IBM Java support team. The reason is the option can cause unlimited native memory growth, leading to out-of-memory errors.
- -Xnolinenumbers
- Disables the line numbers for debugging. See also -Xlinenumbers. By default, line number are on.
- -Xnosigcatch
- Disables JVM signal handling code. See also -Xsigcatch. By default, signal handling is enabled.
- -Xnosigchain
- Disables signal handler chaining. See also -Xsigchain. By default, the signal handler chaining is enabled.
- -Xoptionsfile=<file>
-
Specifies a file that contains JVM options and definitions. By default, no option file is used.
The options file does not support these options:
- -assert
- -fullversion
- -help
- -memorycheck
- -showversion
- -version
- -Xjarversion
- -Xoptionsfile
Although you cannot use -Xoptionsfile recursively within an options file, you can use -Xoptionsfile multiple times on the same command line to load more than one options files.
<file> contains options that are processed as if they had been entered directly as command-line options. For example, the options file might contain:
-DuserString=ABC123 -Xmx256MB
Some options use quoted strings as parameters. Do not split quoted strings over multiple lines using the line continuation character '\'. The '¥' character is not supported as a line continuation character. For example, the following example is not valid in an options file:
-Xevents=vmstop,exec="cmd /c \ echo %pid has finished."
The following example is valid in an options file:
-Xevents=vmstop, \ exec="cmd /c echo %pid has finished."
- -Xoss<size>
Recognized but deprecated. Use -Xss and -Xmso. Sets the maximum Java stack size for any thread. The maximum value for the stack size varies according to platform and specific machine configuration. If you exceed the maximum value, a java/lang/OutOfMemoryError message is reported.
- -Xrdbginfo:<host>:<port>
- Loads the remote debug information server with the specified host and port. By default, the remote debug information server is disabled.
- -Xrs
- Disables
signal handling in the JVM. Setting -Xrs prevents
the Java runtime from handling
any internally or externally generated signals such as SIGSEGV and SIGABRT.
Any signals raised are handled by the default operating system handlers.
Disabling signal handling in the JVM reduces performance by approximately
2-4%, depending on the application.
Note: Linux always uses SIGUSR1.
-Xrs:sync
On Windows systems, hardware exceptions are not handled by the JVM when this option is specified. However, the Windows CTRL_BREAK_EVENT signal, triggered by the Ctrl-Break key combination, is still handled by the JVM. As with -Xrs, the use of -Xrs:sync reduces performance by approximately 2-4%, depending on the application.
- -Xrun<library name>[:<options>]
- This option has been superseded; use the -agentlib option
instead. For more information about -agentlib,
see http://publib.boulder.ibm.com/infocenter/javasdk/v6r0/index.jsp?topic=/com.ibm.java.doc.diagnostics.60/diag/tools/jvmti.html.
-Xrun loads helper libraries. To load multiple libraries, specify it more than once on the command line. Examples of these libraries are:
- -Xrunhprof[:help] | [:<option>=<value>, ...]
- Performs heap, CPU, or monitor profiling.
- -Xrunjdwp[:help] | [:<option>=<value>, ...]
- Loads debugging libraries to support the remote debugging of applications. This option is the same as -Xdbg.
- -Xrunjnichk[:help] | [:<option>=<value>, ...]
- Deprecated. Use -Xcheck:jni instead.
- -Xscmx<size>
- Specifies cache size. This option applies only if a cache is being created and no cache of the same name exists. The default cache size is platform-dependent. You can find out the size value being used by adding -verbose:sizes as a command-line argument. Minimum cache size is 4 KB. Maximum cache size is platform-dependent. The size of cache that you can specify is limited by the amount of physical memory and paging space available to the system. The virtual address space of a process is shared between the shared classes cache and the Java heap. Increasing the maximum size of the Java heap reduces the size of the shared classes cache that you can create.
- -Xshareclasses:<suboptions>
-
Enables class sharing. This option can take a number of suboptions, some of which are cache utilities. Cache utilities perform the required operation on the specified cache, without starting the VM. You can combine multiple suboptions, separated by commas, but the cache utilities are mutually exclusive.
You can use the following suboptions with the -Xshareclasses option:
- destroy (Utility option)
- Destroys a cache using the name specified in the name=<name> suboption. If the name is not specified, the default cache is destroyed. A cache can be destroyed only if all virtual machines using it have shut down, and the user has sufficient permissions.
- destroyAll (Utility option)
- Tries to destroy all caches available to the user. A cache can be destroyed only if all virtual machines using it have shut down, and the user has sufficient permissions.
- expire=<time in minutes> (Utility option)
- Destroys all caches that have been unused for the time specified before loading shared classes. This option is not a utility option because it does not cause the JVM to exit. On NTFS file systems, the expire option is accurate to the nearest hour.
- groupAccess
- Sets operating system permissions on a new cache to allow group access to the cache. The default is user access only.
- help
- Lists all the command-line options.
- listAllCaches (Utility option)
- Lists all the caches on the system, describing if they are in use and when they were last used.
- modified=<modified context>
- Used when a JVMTI agent is installed that might modify bytecode at run time. If you do not specify this suboption and a bytecode modification agent is installed, classes are safely shared with an extra performance cost. The <modified context> is a descriptor chosen by the user; for example, myModification1. This option partitions the cache, so that only JVMs using context myModification1 can share the same classes. For instance, if you run an application with a modification context and then run it again with a different modification context, all classes are stored twice in the cache. See the Diagnostics Guide (http://www.ibm.com/developerworks/java/jdk/diagnosis/50.html) section "Dealing with runtime bytecode modification" for more information.
- name=<name>
- Connects to a cache of a given name, creating the cache if it does not exist. This option is also used to indicate the cache that is to be modified by cache utilities; for example, destroy. Use the listAllCaches utility to show which named caches are currently available. If you do not specify a name, the default name "sharedcc_%u" is used. "%u" in the cache name inserts the current user name.
- none
- Added to the end of a command line, disables class data sharing. This suboption overrides class sharing arguments found earlier on the command line.
- nonfatal
- Allows the JVM to start even if class data sharing fails. Normal behavior for the JVM is to refuse to start if class data sharing fails. If you select nonfatal and the shared classes cache fails to initialize, the JVM starts without class data sharing.
- printAllStats (Utility option)
- Displays detailed information about the contents of the cache specified in the name=<name> suboption. If the name is not specified, statistics are displayed about the default cache. Every class is listed in chronological order with a reference to the location from which it was loaded. See the Diagnostics Guide (http://www.ibm.com/developerworks/java/jdk/diagnosis/50.html) section on the "printAllStats utility" for more information.
- printStats (Utility option)
- Displays summary statistics information about the cache specified in the name=<name> suboption. If the name is not specified, statistics are displayed about the default cache. The most useful information displayed is how full the cache is and how many classes it contains. Stale classes are classes that have been updated on the file system and which the cache has therefore marked "stale". Stale classes are not purged from the cache. See the Diagnostics Guide (http://www.ibm.com/developerworks/java/jdk/diagnosis/50.html) section on the "printStats utility" for more information.
- safemode
- Forces the JVM to load all classes from disk and apply the modifications to those classes (if applicable). See the Diagnostics Guide (http://www.ibm.com/developerworks/java/jdk/diagnosis/50.html) section on "Using the safemode option" for more information.
- silent
- Disables all shared class messages, including error messages. Unrecoverable error messages, which prevent the JVM from initializing, are displayed.
- verbose
- Gives detailed output on the cache I/O activity, listing information about classes being stored and found. Each class loader is given a unique ID (the bootstrap loader is always 0) and the output shows the class loader hierarchy at work, where class loaders must ask their parents for a class before they can load it themselves. It is typical to see many failed requests; this behavior is expected for the class loader hierarchy. The standard option -verbose:class also enables class sharing verbose output if class sharing is enabled.
- verboseHelper
- Enables verbose output for the Java Helper API. This output shows you how the Helper API is used by your class loader.
- verboseIO
- Gives detailed output on the cache I/O activity, listing information about classes being stored and found. Each class loader is given a unique ID (the bootstrap loader is always 0) and the output shows the class loader hierarchy at work, where class loaders must ask their parents for a class before they can load it themselves. It is typical to see many failed requests; this behavior is expected for the class loader hierarchy.
- -Xsigcatch
- Enables VM signal handling code. See also -Xnosigcatch. By default, signal handling is enabled.
- -Xsigchain
- Enables signal handler chaining. See also -Xnosigchain. By default, signal handler chaining is enabled.
- -Xss<size>
- Sets the maximum stack size for Java threads. The default is 256 KB for 32-bit JVMs and 512 KB for 64-bit JVMs. The maximum value varies according to platform and specific machine configuration. If you exceed the maximum value, a java/lang/OutOfMemoryError message is reported.
- -Xssi<size>
- Sets the stack size increment for Java threads. When the stack for a Java thread becomes full it is increased in size by this value until the maximum size (-Xss) is reached. The default is 16 KB.
- -Xthr:minimizeUserCPU
- Minimizes user-mode CPU usage in thread synchronization where possible. The reduction in CPU usage might be a trade-off in exchange for lower performance.
- -XtlhPrefetch
- Speculatively prefetches bytes in the thread local heap (TLH) ahead of the current allocation pointer during object allocation. This helps reduce the performance cost of subsequent allocations.
- -Xtrace[:help] | [:<option>=<value>, ...]
- See the Diagnostics Guide (http://www.ibm.com/developerworks/java/jdk/diagnosis/50.html) section on the "Controlling the trace" for more information.
- -Xverify[:<option>]
- With no parameters, enables the verifier, which is the default.
Therefore, if used on its own with no parameters, for example, -Xverify,
this option does nothing. Optional parameters are as follows:
- all - enable maximum verification
- none - disable the verifier
- remote - enables strict class-loading checks on remotely loaded classes
-XX command-line options
JVM command-line options that are specified with -XX are not stable and are not recommended for casual use.
These options are subject to change without notice.
- -XXallowvmshutdown:[false|true]
- This option is provided as a workaround for customer applications that cannot shut down cleanly, as described in APAR IZ59734. Customers who need this workaround should use -XXallowvmshutdown:false. The default option is -XXallowvmshutdown:true for Java 5 SR10 onwards.
- -XX:-StackTraceInThrowable
- This option removes stack traces from exceptions. By default,
stack traces are available in exceptions. Including a stack trace
in exceptions requires walking the stack and that can affect performance.
Removing stack traces from exceptions can improve performance but
can also make problems harder to debug.
When this option is enabled, Throwable.getStackTrace() returns an empty array and the stack trace is displayed when an uncaught exception occurs. Thread.getStackTrace() and Thread.getAllStackTraces() are not affected by this option.
JIT command-line options
Use these JIT compiler command-line options to control code compilation.
For more information about JIT , see the Diagnostics Guide (http://www.ibm.com/developerworks/java/jdk/diagnosis/50.html).
- -Xcodecache<size>
- This option is used to tune performance. It sets the size of each
block of memory that is allocated to store the native code of compiled Java methods. By default, this size
is selected internally according to the processor architecture and
the capability of your system. If profiling tools show significant
costs in trampolines, that is a good reason to change the size until
the costs are reduced. Changing the size does not mean always increasing
the size. The option provides the mechanism to tune for the right
size until hot interblock calls are eliminated. A reasonable starting
point to tune for the optimal size is (totalNumberByteOfCompiledMethods
* 1.1).
Note: Trampolines are where reflection is used to avoid inner classes. JVMTI identifies trampolines in a methodLoad2 event.
- -Xint
- Makes the JVM use the Interpreter only, disabling the Just-In-Time (JIT) compilers. By default, the JIT compiler is enabled.
- -Xjit[:<parameter>=<value>, ...]
- With no parameters, enables the JIT compiler. The JIT compiler
is enabled by default, so using this option on its own has no effect.
Use this option to control the behavior of the JIT compiler. Useful
parameters are:
- count=<n>
Where <n> is the number of times a method is called before it is compiled. For example, setting count=0 forces the JIT compiler to compile everything on first execution.
- limitFile=(<filename>, <m>, <n>)
- Compile only the methods listed on lines <m> to <n> in the specified limit file. Methods not listed in the limit file and methods listed on lines outside the range are not compiled.
- optlevel=[ noOpt | cold | warm | hot | veryHot | scorching ]
- Forces the JIT compiler to compile all methods at a specific optimization level. Specifying optlevel might have an unexpected effect on performance, including lower overall performance.
- verbose
- Reports information about the JIT and AOT compiler configuration and method compilation.
- -Xquickstart
- Causes the JIT compiler to run with a subset of optimizations. The effect is faster compilation times that improve startup time, but longer running applications might run slower. -Xquickstart can degrade performance if it is used with long-running applications that contain hot methods. The implementation of -Xquickstart is subject to change in future releases. By default, -Xquickstart is disabled..
- -XsamplingExpirationTime<time> (from Service Refresh 5)
- Disables the JIT sampling thread after <time> seconds. When the JIT sampling thread is disabled, no processor cycles are used by an idle JVM.
Garbage Collector command-line options
Use these Garbage Collector command-line options to control garbage collection.
You might need to read the section on "Memory management" in the Diagnostics Guide (http://www.ibm.com/developerworks/java/jdk/diagnosis/50.html) to understand some of the references that are given here.
The -verbose:gc option detailed in the section on "-verbose:gc logging" in the Diagnostics Guide (http://www.ibm.com/developerworks/java/jdk/diagnosis/50.html) is the main diagnostic aid that is available for runtime analysis of the Garbage Collector. However, additional command-line options are available that affect the behavior of the Garbage Collector and might aid diagnostics.
For options that take a <size> parameter, suffix the number with "k" or "K" to indicate kilobytes, "m" or "M" to indicate megabytes, or "g" or "G" to indicate gigabytes.
For options that take a <percentage> parameter, use a number from 0 to 1, for example, 50% is 0.5.
- -Xalwaysclassgc
- Always perform dynamic class unloading checks during global collection. The default behavior is as defined by -Xclassgc.
- -Xclassgc
- Enables the collection of class objects only on class loader changes. This behavior is the default.
- -Xcompactexplicitgc
- Enables full compaction each time System.gc() is called.
- -Xcompactgc
- Compacts on all garbage collections (system and global).
The default (no compaction option specified) makes the GC compact based on a series of triggers that attempt to compact only when it is beneficial to the future performance of the JVM.
- -Xconcurrentbackground<number>
- Specifies the number of low-priority background threads attached to assist the mutator threads in concurrent mark. The default is 1.
- -Xconcurrentlevel<number>
- Specifies the allocation "tax" rate. It indicates the ratio between the amount of heap allocated and the amount of heap marked. The default is 8.
- -Xconmeter:<soa | loa | dynamic>
- This option determines the usage of which area, LOA (Large Object Area) or SOA (Small Object Area), is metered and hence which allocations are taxed during concurrent mark. Using -Xconmeter:soa (the default) applies the allocation tax to allocations from the small object area (SOA). Using -Xconmeter:loa applies the allocation tax to allocations from the large object area (LOA). If -Xconmeter:dynamic is specified, the collector dynamically determines which area to meter based on which area is exhausted first, whether it is the SOA or the LOA.
- -Xdisableexcessivegc
- Disables the throwing of an OutOfMemory exception if excessive time is spent in the GC.
- -Xdisableexplicitgc
-
Disables System.gc() calls.
Many applications still make an excessive number of explicit calls to System.gc() to request garbage collection. In many cases, these calls degrade performance through premature garbage collection and compactions. However, you cannot always remove the calls from the application.
The -Xdisableexplicitgc parameter allows the JVM to ignore these garbage collection suggestions. Typically, system administrators use this parameter in applications that show some benefit from its use.
By default, calls to System.gc() trigger a garbage collection.
- -Xdisablestringconstantgc
- Prevents strings in the string intern table from being collected.
- -Xenableexcessivegc
- If excessive time is spent in the GC, the option returns null for an allocate request and thus causes an OutOfMemory exception to be thrown. This action occurs only when the heap has been fully expanded and the time spent is making up at least 95%. This behavior is the default.
- -Xenablestringconstantgc
- Enables strings from the string intern table to be collected. This behavior is the default.
- -Xgc:<verbose | compact | nocompact >
- Options that change the behavior of the Garbage Collector.
- -Xgcpolicy:< gencon | optavgpause | optthruput | subpool (AIX, Linux and IBM i on IBM POWER® architecture, Linux and z/OS® on zSeries®) >
- Controls the behavior of the Garbage Collector.
The gencon option requests the combined use of concurrent and generational GC to help minimize the time that is spent in any garbage collection pause.
The optavgpause option reduces the time that is spent in these garbage collection pauses and limits the effect of increasing heap size on the length of the garbage collection pause. Use optavgpause if your configuration has a large heap. Enables concurrent mark.
The optthruput option is the default and delivers high throughput to applications, but at the cost of occasional pauses. Disables concurrent mark.
The subpool option (AIX, Linux and IBM i on IBM POWER architecture, and z/OS) uses an improved object allocation algorithm to achieve better performance when allocating objects on the heap. This option might improve performance on large SMP systems.
- -Xgcthreads<number>
- Sets the number of threads that the Garbage Collector uses for
parallel operations. This total number of GC threads
is composed of one application thread with the remainder being dedicated
GC threads. By default, the number is set to
the number of physical CPUs present. To set it to a different
number (for example 4), use -Xgcthreads4. The minimum valid value is 1, which disables parallel
operations, at the cost of performance. No advantage is gained if
you increase the number of threads above the default setting; you
are recommended not to do so.
On systems running multiple JVMs or in LPAR environments where multiple JVMs can share the same physical CPUs, you might want to restrict the number of GC threads used by each JVM. The restriction helps prevent the total number of parallel operation GC threads for all JVMs exceeding the number of physical CPUs present, when multiple JVMs perform garbage collection at the same time.
- -Xgcworkpackets<number>
- Specifies the total number of work packets available in the global collector. If not specified, the collector allocates a number of packets based on the maximum heap size.
- -Xloa
- Allocates a large object area (LOA). Objects are allocated in this LOA rather than the SOA. By default, the LOA is enabled for all GC policies except for subpool, where the LOA is not available.
- -Xloainitial<percentage>
- Specifies the initial percentage (between 0 and 0.95) of the current tenure space allocated to the large object area (LOA). The default value is 0.05, which is 5%.
- -Xloamaximum<percentage>
- Specifies the maximum percentage (between 0 and 0.95) of the current tenure space allocated to the large object area (LOA). The default value is 0.5, which is 50%.
- -Xmaxe<size>
- Sets the maximum amount by which the garbage collector expands the heap. Typically, the garbage collector expands the heap when the amount of free space falls below 30% (or by the amount specified using -Xminf), by the amount required to restore the free space to 30%. The -Xmaxe option limits the expansion to the specified value; for example -Xmaxe10M limits the expansion to 10 MB. By default, there is no maximum expansion size.
- -Xmaxf<percentage>
- Specifies the maximum percentage of heap that must be free after a garbage collection. If the free space exceeds this amount, the JVM tries to shrink the heap. The default value is 0.6 (60%).
- -Xmaxt<percentage>
- Specifies the maximum percentage of time to be spent in Garbage Collection. If the percentage of time rises above this value, the JVM tries to expand the heap. The default value is 13%.
- -Xmca<size>
- Sets the expansion step for the memory allocated to store the
RAM portion of loaded classes. Each time more memory is required to
store classes in RAM, the allocated memory is increased by this amount.
By default, the expansion step is 32 KB. Use the -verbose:sizes option
to determine the value that the VM is using.
If the expansion step size you choose is too large, OutOfMemoryError is reported. The exact value of a "too large" expansion step size varies according to the platform and the specific machine configuration.
- -Xmco<size>
- Sets the expansion step for the memory allocated to store the
ROM portion of loaded classes. Each time more memory is required to
store classes in ROM, the allocated memory is increased by this amount.
By default, the expansion step is 128 KB. Use the -verbose:sizes option
to determine the value that the VM is using.
If the expansion step size you choose is too large, OutOfMemoryError is reported. The exact value of a "too large" expansion step size varies according to the platform and the specific machine configuration.
- -Xmine<size>
- Sets the minimum amount by which the Garbage Collector expands the heap. Typically, the garbage collector expands the heap by the amount required to restore the free space to 30% (or the amount specified using -Xminf). The -Xmine option sets the expansion to be at least the specified value; for example, -Xmine50M sets the expansion size to a minimum of 50 MB. By default, the minimum expansion size is 1 MB.
- -Xminf<percentage>
- Specifies the minimum percentage of heap to be left free after a garbage collection. If the free space falls below this amount, the JVM attempts to expand the heap. The default value is 30%.
- -Xmint<percentage>
- Specifies the minimum percentage of time to spend in Garbage Collection. If the percentage of time drops below this value, the JVM tries to shrink the heap. The default value is 5%.
- -Xmn<size>
- Sets the initial and maximum size of the new area to the specified value when using -Xgcpolicy:gencon. Equivalent to setting both -Xmns and -Xmnx. If you set either -Xmns or -Xmnx, you cannot set -Xmn. If you try to set -Xmn with either -Xmns or -Xmnx, the VM does not start, returning an error. By default, -Xmn is not set. If the scavenger is disabled, this option is ignored.
- -Xmns<size>
- Sets the initial size of the new area to the specified value when using -Xgcpolicy:gencon. By default, this option is set to 25% of the value of the -Xms option or 64 MB, whichever is less. This option returns an error if you try to use it with -Xmn. You can use the -verbose:sizes option to find out the values that the VM is currently using. If the scavenger is disabled, this option is ignored.
- -Xmnx<size>
- Sets the maximum size of the new area to the specified value when using -Xgcpolicy:gencon. By default, this option is set to 25% of the value of the -Xmx option or 64 MB, whichever is less. This option returns an error if you try to use it with -Xmn. You can use the -verbose:sizes option to find out the values that the VM is currently using. If the scavenger is disabled, this option is ignored.
- -Xmo<size>
- Sets the initial and maximum size of the old (tenured) heap to the specified value when using -Xgcpolicy:gencon. Equivalent to setting both -Xmos and -Xmox. If you set either -Xmos or -Xmox, you cannot set -Xmo. If you try to set -Xmo with either -Xmos or -Xmox, the VM does not start, returning an error. By default, -Xmo is not set.
- -Xmoi<size>
- Sets the amount the Java heap is incremented when using -Xgcpolicy:gencon. If set to zero, no expansion is allowed. By default, the increment size is calculated on the expansion size, set by -Xmine and -Xminf.
- -Xmos<size>
- Sets the initial size of the old (tenure) heap to the specified value when using -Xgcpolicy:gencon. By default, this option is set to the value of the -Xms option minus the value of the -Xmns option. This option returns an error if you try to use it with -Xmo. You can use the -verbose:sizes option to find out the values that the VM is currently using.
- -Xmox<size>
- Sets the maximum size of the old (tenure) heap to the specified value when using -Xgcpolicy:gencon. By default, this option is set to the same value as the -Xmx option. This option returns an error if you try to use it with -Xmo. You can use the -verbose:sizes option to find out the values that the VM is currently using.
- -Xmr<size>
- Sets the size of the Garbage Collection "remembered set". This set is a list of objects in the old (tenured) heap that have references to objects in the new area. By default, this option is set to 16 K.
- -Xmrx<size>
- Sets the remembered maximum size setting.
- -Xms<size>
- Sets the initial Java heap
size. You can also use the -Xmo option. The minimum
size is 8 KB.
If scavenger is enabled, -Xms >= -Xmn + -Xmo.
If scavenger is disabled, -Xms >= -Xmo.
- -Xmx<size>
- Sets the maximum memory size (-Xmx >= -Xms)
Examples of the use of -Xms and -Xmx:
- -Xms2m -Xmx64m
- Heap starts at 2 MB and grows to a maximum of 64 MB.
- -Xms100m -Xmx100m
- Heap starts at 100 MB and never grows.
- -Xms20m -Xmx1024m
- Heap starts at 20 MB and grows to a maximum of 1 GB.
- -Xms50m
- Heap starts at 50 MB and grows to the default maximum.
- -Xmx256m
- Heap starts at default initial value and grows to a maximum of 256 MB.
- -Xnoclassgc
- Disables class garbage collection. This option switches off garbage collection of storage associated with Java classes that are no longer being used by the JVM. The default behavior is as defined by -Xclassgc. By default, class garbage collection is performed.
- -Xnocompactexplicitgc
- Disables compaction on System.gc() calls. Compaction takes place on global garbage collections if you specify -Xcompactgc or if compaction triggers are met. By default, compaction is enabled on calls to System.gc().
- -Xnocompactgc
- Disables compaction on all garbage collections (system or global). By default, compaction is enabled.
- -Xnoloa
- Prevents allocation of a large object area; all objects are allocated in the SOA. See also -Xloa.
- -Xnopartialcompactgc
- Disables incremental compaction. See also -Xpartialcompactgc.
- -Xpartialcompactgc
- Enables incremental compaction. See also -Xnopartialcompactgc. By default, this option is not set, so all compactions are full.
- -Xsoftmx<size> (AIX only)
- This option sets the initial maximum size of the Java heap. Use the -Xmx option to set the maximum heap size. Use the AIX DLPAR API in your application to alter the heap size limit between -Xms and -Xmx at run time. By default, this option is set to the same value as -Xmx.
- -Xsoftrefthreshold<number>
- Sets the number of GCs after which a soft reference is cleared if its referent has not been marked. The default is 32, meaning that on the 32nd GC where the referent is not marked the soft reference is cleared.
- -Xtgc:<arguments>
- Provides GC tracing options, where <arguments> is
a comma-separated list containing one or more of the following arguments:
- backtrace
- Before a garbage collection, a single line is printed containing the name of the master thread for garbage collection, as well as the value of the osThread slot in the J9VMThread structure.
- compaction
- Prints extra information showing the relative time spent by threads in the "move" and "fixup" phases of compaction
- concurrent
- Prints extra information showing the activity of the concurrent mark background thread
- dump
- Prints a line of output for every free chunk of memory in the system, including "dark matter" (free chunks that are not on the free list for some reason, typically because they are too small). Each line contains the base address and the size in bytes of the chunk. If the chunk is followed in the heap by an object, the size and class name of the object is also printed. This argument has a similar effect to the terse argument.
- freeList
- Before a garbage collection, prints information about the free list and allocation statistics since the last GC. Prints the number of items on the free list, including "deferred" entries (with the scavenger, the unused space is a deferred free list entry). For TLH and non-TLH allocations, prints the total number of allocations, the average allocation size, and the total number of bytes discarded during allocation. For non-TLH allocations, also included is the average number of entries that were searched before a sufficiently large entry was found.
- parallel
- Produces statistics on the activity of the parallel threads during the mark and sweep phases of a global GC.
- references
- Prints extra information every time that a reference object is enqueued for finalization, showing the reference type, reference address, and referent address.
- scavenger
- Prints extra information after each scavenger collection. A histogram is produced showing the number of instances of each class, and their relative ages, present in the survivor space. The information is obtained by performing a linear walk-through of the space.
- terse
- Dumps the contents of the entire heap before and after a garbage collection. For each object or free chunk in the heap, a line of trace output is produced. Each line contains the base address, "a" if it is an allocated object, and "f" if it is a free chunk, the size of the chunk in bytes, and, if it is an object, its class name.
- -Xverbosegclog[:<file>[,<X>,<Y>]]
-
Causes -verbose:gc output to be written to the specified file. If the file cannot be found, -verbose:gc tries to create the file, and then continues as normal if it is successful. If it cannot create the file (for example, if an invalid filename is passed into the command), it redirects the output to stderr.
If you specify <X> and <Y> the -verbose:gc output is redirected to X files, each containing Y GC cycles.
The dump agent tokens can be used in the filename. See the Diagnostics Guide (http://www.ibm.com/developerworks/java/jdk/diagnosis/50.html) section on the "Dump agent tokens" for more information. If you do not specify <file>, verbosegc.m%d.3/4/13M%S.%pid.txt is used.
By default, no verbose GC logging occurs.
Appendix B. Default settings for the JVM
This appendix shows the default settings that the JVM uses. These settings affect how the JVM operates if you do not apply any changes to its environment. The tables show the JVM operation and the default setting.
These tables are a quick reference to the state of the JVM when it is first installed. The last column shows how the default setting can be changed:
- c
- The setting is controlled by a command-line parameter only.
- e
- The setting is controlled by an environment variable only.
- ec
- The setting is controlled by a command-line parameter or an environment variable. The command-line parameter always takes precedence.
JVM setting | Default | Setting affected by |
---|---|---|
Javadumps | Enabled | ec |
Javadumps on out of memory | Enabled | ec |
Heapdumps | Disabled | ec |
Heapdumps on out of memory | Enabled | ec |
Sysdumps | Enabled | ec |
Where dump files are produced | Current® directory | ec |
Verbose output | Disabled | c |
Boot classpath search | Disabled | c |
JNI checks | Disabled | c |
Remote debugging | Disabled | c |
Strict conformance checks | Disabled | c |
Quickstart | Disabled | c |
Remote debug info server | Disabled | c |
Reduced signaling | Disabled | c |
Signal handler chaining | Enabled | c |
Classpath | Not set | ec |
Class data sharing | Disabled | c |
Accessibility support | Enabled | e |
JIT compiler | Enabled | ec |
JIT debug options | Disabled | c |
Java2D max size of fonts with algorithmic bold | 14 point | e |
Java2D use rendered bitmaps in scalable fonts | Enabled | e |
Java2D freetype font rasterizing | Enabled | e |
Java2D use AWT fonts | Disabled | e |
JVM setting | AIX | IBM i | Linux | Windows | z/OS | Setting affected by |
---|---|---|---|---|---|---|
Default locale | None | None | None | N/A | None | e |
Time to wait before starting plug-in | N/A | N/A | Zero | N/A | N/A | e |
Temporary directory | /tmp | /tmp | /tmp | c:\temp | /tmp | e |
Plug-in redirection | None | None | None | N/A | None | e |
IM switching | Disabled | Disabled | Disabled | N/A | Disabled | e |
IM modifiers | Disabled | Disabled | Disabled | N/A | Disabled | e |
Thread model | N/A | N/A | N/A | N/A | Native | e |
Initial stack size for Java Threads 32-bit. Use: -Xiss<size> | 2 KB | 2 KB | 2 KB | 2 KB | 2 KB | c |
Maximum stack size for Java Threads 32-bit. Use: -Xss<size> | 256 KB | 256 KB | 256 KB | 256 KB | 256 KB | c |
Stack size for OS Threads 32-bit. Use -Xmso<size> | 256 KB | 256 KB | 256 KB | 32 KB | 256 KB | c |
Initial stack size for Java Threads 64-bit. Use: -Xiss<size> | 2 KB | N/A | 2 KB | 2 KB | 2 KB | c |
Maximum stack size for Java Threads 64-bit. Use: -Xss<size> | 512 KB | N/A | 512 KB | 512 KB | 512 KB | c |
Stack size for OS Threads 64-bit. Use -Xmso<size> | 256 KB | N/A | 256 KB | 256 KB | 256 KB | c |
Initial heap size. Use -Xms<size> | 4 MB | 4 MB | 4 MB | 4 MB | 1 MB | c |
Maximum Java heap size. Use -Xmx<size> | 64 MB | 2 GB | Half the real memory with a minimum of 16 MB and a maximum of 512 MB | Half the real memory with a minimum of 16 MB and a maximum of 2 GB | 64 MB | c |
Appendix C. Known limitations
Known limitations on the SDK and Runtime Environment for Windows.
You can find more help with problem diagnosis in the Diagnostics Guide at http://www.ibm.com/developerworks/java/jdk/diagnosis/50.html.
XSLT namespace and Netbeans 5.0 problems
If the data provided to your transformation is a DOM that you have created programmatically, the XSLT interpreter processor might have problems with implicit namespaces. The problems are incorrect namespace declarations, or the omission of namespace declarations from the resulting document. An example Java fragment follows:
// Example of an explicit namespace - an attribute node will be created in the DOM // for xmlns='ht tp://my.org/project' String data = "<projectxmins='http://my.org/project/>"; Document doc = DocumentBuilderFactory.newInstance().newDocumentBuilder().parse (new InputSource(n ew StringReader(data))); // Example of an implicit namespace - no attribute node is created for the // implicit namespace xm lns='http://your.org/project Element typeElem = doc.createElementNS("http://your.org/project", "type"); doc.getDocumentElement().appendChild(typeElem);
To work around this limitation you can use the XSLT compiler processor, XSLTC. You can specify the compiler processor by using the -XSLTC option with the Process command or by setting the javax.xml.transform.TransformerFactory service provider to org.apache.xalan.xsltc.trax.TransformerFactoryImpl.
Netbeans 5.0 does not run under the JVM with default settings. To enable Netbeans to run, set the
=org.apache.xalan.xsltc.trax.TransformerFactoryImpl
property in jre/lib/jaxp.properties.
BIOS settings on AMD64 SMP systems
The Node memory interleaving BIOS setting must be set to DISABLED. Otherwise, unpredictable results might occur, including Java crashes and hangs. This instruction is in accordance with recommendations from AMD.
Font problems in supported locales
The IBM 64-bit SDK for Windows, v5.0 supports the following locales:
- Bengali (bn_IN)
- Malayalam (ml_IN)
- Oriya (or_IN)
However the fonts from these locales might not work on AWT components.
Use of sockets with IPv6
The IBM 64-bit SDK for Windows, v5.0 supports IPv6. However, because the current IPv6 support in Windows is not dual-stack, the SDK emulates dual-stack behavior on an IPv6 enabled system. Your Java application might use up to twice as many sockets because of the nature of the emulation. To disable this emulation, disable IPv6 support in the SDK by setting the system property java.net.preferIPv4Stack to true.
JConsole monitoring tool Local tab
In the IBM JConsole tool, the Local tab, which allows you to connect to other Virtual Machines on the same system, is not available. Also, the corresponding command line pid option is not supported. Instead, use the Remote tab in JConsole to connect to the Virtual Machine that you want to monitor. Alternatively, use the connection command-line option, specifying a host of localhost and a port number. When you start the application that you want to monitor, set these command-line options:
- -Dcom.sun.management.jmxremote.port=<value>
- Specifies the port the management agent listens on.
- -Dcom.sun.management.jmxremote.authenticate=false
- Disables authentication unless you have created a user name file.
- -Dcom.sun.management.jmxremote.ssl=false
- Disables SSL encryption.
JConsole monitoring tool when the JIT is not enabled
The IBM JConsole tool has the following limitations when the JIT is not enabled:
- The Summary tab is not available.
- The VM tab is not available.
- The chart accessed from the Memory tab is not updated.
- The chart accessed from the Threads tab is not updated.
- You cannot determine if the Perform GC button has an effect when accessed from the Memory tab.
Incorrect stack traces when loading new classes after an Exception is caught
If new classes are loaded after an Exception has been caught, the stack trace contained in the Exception might become incorrect. The stack trace becomes incorrect if classes in the stack trace are unloaded, and new classes are loaded into their memory segments.
Input Method Editor (IME)
When working with an Input Method Editor (IME), complete the character composition and select the candidate before using the workspace for any other operation.
When a user types text in an AWT TextArea while using an Input Method Editor (IME), and then resizes the application window before committing the text, the text is committed automatically.
Slow DSA key pair generation
Creating DSA key pairs of unusual lengths can take a significant amount of time on slow machines. Do not interpret the delay as a stop or endless loop, because the process finishes if sufficient time is allowed. The DSA key generation algorithm has been optimized to generate standard key lengths (for instance, 512, 1024) more quickly than others.
Personal firewalls
Personal firewalls can cause problems for the Windows NIO code, causing particular operations to fail. For example, the method call Selector.open() can throw a "java.io.IOException: Unable to establish loopback connection" with a cause of "java.net.ConnectException: Connection refused: connect". The exception is caused by the operating system connecting on a port that is being blocked by the firewall. The JVM tries the connect operation again, asking the operating system to select a different port number. If it still cannot connect after several attempts, a ConnectException is thrown.
If you see this exception, you can set the system property java.nio.debug=pipe to see which port numbers are being blocked.
File handle exhaustion
On Windows XP, the default value of the number of files that you can have simultaneously opened is too low and causes problems to applications that are I/O intensive. To fix this limitation, edit the file <windows>\system32\CONFIG.NT and set the following values:
files=200 buffers=60
where <windows> is the directory where Windows is installed.
DBCS characters
If you are typing DBCS characters in a JTextArea, JTextField, or JFileChooser, switching from some Chinese IMEs (in particular, Chinese Internal Code and Zhengma) to Intelligent ABC IME might cause a core dump to be produced.
Czech language installation
For Czech users, note that the language selection panel of the installation program offers one translated entry in an installation that is otherwise not translated. This limitation is caused by the installation program. The string is picked up from the operating system based on the code page. Because Polish (for which the installation is translated) and Czech both have code page 1250, the installation program attempts to retrieve a language list from the system for both languages, resulting in this string in the language list.
Traditional Chinese and the more command
If you use Traditional Chinese, do not pipe the output from your Java application directly into the more command. Instead, direct the output to a temporary file and view the file separately.
Japanese MS-IME and Windows XP Themes
If you use the Japanese MS-IME on Windows XP Professional x64 Edition, the 64-bit SDK might cause errors with Windows XP Themes. To avoid these errors, set the environmental variable IBMJAVA_USE_WINDOWS_CLASSIC_THEME to force Java GUI windows to display using the Windows classic theme. Alternatively, change your system theme to Windows classic. For more information about this limitation, in Japanese only, see Microsoft Knowledge Base Article 905843.
NullPointerException with the GTK Look and Feel
DBCS environments only
If your application fails with a NullPointerException using the GTK Look and Feel, unset the GNOME_DESKTOP_SESSION_ID environment variable.
Java installation on Windows 7 on AMD64/EM64T architecture
This limitation applies only to Java 5 SR11.
The first installation and uninstallation of the Java SDK is successful, but with one or more of the following errors:
DLL function not found : sfc.SRSetRestorePoint
Error 1334 : The file 'number' cannot be installed because the file cannot be found in the cabinet file 'Data1.cab'. This indicates an error or problem with the package.
Error Number :0x80040703 Description : sfc.SRSetRestorePoint error
LoadDllRegutsiMSI.exe was not found.
After three or more installation and uninstallation cycles, all further installations might be unsuccessful.
Problems might also be experienced with the installation and uninstallation of the Java JRE when the Java SDK has previously been installed on the system. You might see the following error message:
The installation source for this product is not available. Verify that the source exists and that you can access it. I:\Windows\Installer\4c068.msi
Using -Xshareclasses:destroy during JVM startup
When running the command java -Xshareclasses:destroy on a shared cache that is being used by a second JVM during startup, you might have the following issues:
- The second JVM fails.
- The shared cache is deleted.
Appendix D. Support for virtualization software
The IBM SDK for Java is supported on a number of virtualized environments.
The virtualization capabilities of the AIX POWER hypervisor, provided as part of the IBM POWER platform, have been fully tested with all SDK supported releases of AIX.
The virtualization capabilities of the Processor Resource/System Manager (PR/SM™) provided as part of the IBM z-31 and IBM z-64 platforms have been fully tested with all SDK supported releases of z/OS.
In addition, the following virtualization software has been tested for the IBM SDK for Java:
Virtualization software | SDK release tested |
---|---|
z/VM® v6.1 | SR12 |
VMWare ESXi Server 4 | SR5 |
Kernel-based Virtual Machine (KVM) on Red Hat Enterprise Virtualization V5 | SR12 |
Microsoft Hyper-V R2 | SR5 |
Notices
This information was developed for products and services offered in the U.S.A.
IBM may not offer the products, services, or features discussed in this document in other countries. Consult your local IBM representative for information on the products and services currently available in your area. Any reference to an IBM product, program, or service is not intended to state or imply that only that IBM product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any IBM intellectual property right may be used instead. However, it is the user's responsibility to evaluate and verify the operation of any non-IBM product, program, or service.
IBM may have patents or pending patent applications covering subject matter described in this document. The furnishing of this document does not grant you any license to these patents. You can send license inquiries, in writing, to:
- IBM Director of Licensing
- IBM Corporation
- North Castle Drive
- Armonk, NY 10504-1758
- U.S.A.
For license inquiries regarding double-byte character set (DBCS) information, contact the IBM Intellectual Property Department in your country or send inquiries, in writing, to:
- Intellectual Property Licensing
- Legal and Intellectual Property Law
- IBM Japan Ltd.
- 1623-14, Shimotsuruma, Yamato-shi
- Kanagawa 242-8502 Japan
The following paragraph does not apply to the United Kingdom or any other country where such provisions are inconsistent with local law:
INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF NON-INFRINGEMENT, MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.
This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. IBM may make improvements and/or changes in the product(s) and/or the program(s) described in this publication at any time without notice.
Any references in this information to non-IBM Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this IBM product and use of those Web sites is at your own risk.
IBM may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.
Licensees of this program who wish to have information about it for the purpose of enabling: (i) the exchange of information between independently created programs and other programs (including this one) and (ii) the mutual use of the information which has been exchanged, should contact:
- JIMMAIL@uk.ibm.com
- [Hursley Java Technology Center (JTC) contact]
Such information may be available, subject to appropriate terms and conditions, including in some cases, payment of a fee.
The licensed program described in this document and all licensed material available for it are provided by IBM under terms of the IBM Customer Agreement, IBM International Program License Agreement or any equivalent agreement between us.
Any performance data contained herein was determined in a controlled environment. Therefore, the results obtained in other operating environments may vary significantly. Some measurements may have been made on development-level systems and there is no guarantee that these measurements will be the same on generally available systems. Furthermore, some measurements may have been estimated through extrapolation. Actual results may vary. Users of this document should verify the applicable data for their specific environment.
Information concerning non-IBM products was obtained from the suppliers of those products, their published announcements or other publicly available sources. IBM has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-IBM products. Questions on the capabilities of non-IBM products should be addressed to the suppliers of those products.
All statements regarding IBM's future direction or intent are subject to change or withdrawal without notice, and represent goals and objectives only.
COPYRIGHT LICENSE:
This information contains sample application programs in source language, which illustrate programming techniques on various operating platforms. You may copy, modify, and distribute these sample programs in any form without payment to IBM, for the purposes of developing, using, marketing or distributing application programs conforming to the application programming interface for the operating platform for which the sample programs are written. These examples have not been thoroughly tested under all conditions. IBM, therefore, cannot guarantee or imply reliability, serviceability, or function of these programs. The sample programs are provided "AS IS", without warranty of any kind. IBM shall not be liable for any damages arising out of your use of the sample programs.
Each copy or any portion of these sample programs or any derivative work, must include a copyright notice as follows:
© (your company name) (year). Portions of this code are derived from IBM Corp. Sample Programs. © Copyright IBM Corp. _enter the year or years_.
If you are viewing this information softcopy, the photographs and color illustrations may not appear.
Trademarks
IBM, the IBM logo, and ibm.com are trademarks or registered trademarks of International Business Machines Corporation in the United States, other countries, or both. If these and other IBM trademarked terms are marked on their first occurrence in this information with a trademark symbol (® or ™), these symbols indicate U.S. registered or common law trademarks owned by IBM at the time this information was published. Such trademarks may also be registered or common law trademarks in other countries. A current list of IBM trademarks is available on the Web at "Copyright and trademark information" at http://www.ibm.com/legal/copytrade.shtml.
Intel is a trademark of Intel Corporation in the United States, other countries, or both.
Linux is a trademark of Linus Torvalds in the United States, other countries, or both.
Microsoft, Windows and the Windows logo are trademarks of Microsoft Corporation in the United States, other countries, or both.
Java and all Java-based trademarks and logos are trademarks or registered trademarks of Oracle and/or its affiliates.
Other company, product, or service names may be trademarks or service marks of others.