Final Release of Patch V85S-4

Only applicable to V85S-1 Code Build Stream
Pre-requisite patches  V85S-2, V85S-3 must be installed prior to this patch.
Note:  You CANNOT install this patch into V85S-0 build.


*************** COMPAQ COMPUTER CORPORATION – DISCLAIMER **************
* In accordance to Compaq's commitment to maintain the highest level  *
* of customer satisfaction, this patch is being provided to customers *
* who have purchased the referenced Storageworks product that is      *
* currently covered by one of Compaq's  extensive warranty plans and  *
* is also provided to those customers not yet underCompaq's extended  *
* warranty plan as a courtesy.  The availability of this patch is in  *
* no way an obligation by Compaq to continue this practice in the     *
* future.                                                             *
***********************************************************************

****************************** WARNING ********************************
*                                                                     *
* - Please be sure to cut and paste EXACTLY as indicated.  Any        *
*   addition or subtraction of pertinent patch data will mean the     *
*   patch will not load due to a checksum failure and the controller  *
*   will remain at it's original version.                             *
*                                                                     *
* - As always, any critical data should be backed up prior to         * 
*   performing any updates.                                           *
***********************************************************************

				PATCH V85S-4

Patch Title:	Don’t log UA to only CCL install
HSOF Version:	HSG80 V85S
Patch Number:	4
Date:		MARCH 5, 2000.

I.	Patch Description:


  The HSG80 controller crashes with a Last Failure Code of 02DD0101.

  During processing of show (unit, storage, disks) type of commands,
  ACS memory resources are not properly released after completion of the
  command processing.  This occurrence of crashing the controller is
  greatly accelerated by the number and frequency of 'show unit status' 
  requests made of the controller.  These commands may be received either
  via the CLI port on the HSG80 controller or via the ‘send/receive 
  diagnostic’ commands of the SWCC agent.


PATCH_V85S-4.TXT;1

Title:  Deallocate data buffers after use

Version:        V85S
Length:         183
Patch Type:     0
Patch Number:   4

 Count:         2
 Address:       C0090FDC
 Value[  0]:    84003000
 Value[  1]:    C0FFF390

 Count:         8
 Address:       C0FFF390
 Value[  0]:    32012010
 Value[  1]:    8C811000
 Value[  2]:    86003000
 Value[  3]:    C0089760
 Value[  4]:    82F1607C
 Value[  5]:    5C801606
 Value[  6]:    84003000
 Value[  7]:    C0090FE4

 Count:         2
 Address:       C006E9E4
 Value[  0]:    84003000
 Value[  1]:    C0FFF3B0


 Count:         10
 Address:       C0FFF3B0
 Value[  0]:    32012010
 Value[  1]:    8C811000
 Value[  2]:    86003000
 Value[  3]:    C0089760
 Value[  4]:    80A1E078
 Value[  5]:    3555200C
 Value[  6]:    84003000
 Value[  7]:    C006E9EC
 Value[  8]:    84003000
 Value[  9]:    C006EA54

 Count:         2
 Address:       C00708AC
 Value[  0]:    84003000
 Value[  1]:    C0FFF3E0

 Count:         6
 Address:       C0FFF3E0
 Value[  0]:    9021631C
 Value[  1]:    5C401610
 Value[  2]:    320A2008
 Value[  3]:    8C200000
 Value[  4]:    84003000
 Value[  5]:    C00708B4

 Count:         1
 Address:       C00708C4
 Value[  0]:    35A5404C

 Count:         1
 Address:       C00708D8
 Value[  0]:    35850038

 Count:         0

Verification:   FCCE74A8



II.	Patch Installation Script for use with a host to CLI Utility 


Extract the following script to file PATCH_V85S-4.script. 
Submit script to CCL via HSZterm utility.

----- Begin Script -----
!
!Deallocate data buffers after use
!
run clcp
2
1
y
V85S
183
0
4
2
C0090FDC
84003000
C0FFF390
8
C0FFF390
32012010
8C811000
86003000
C0089760
82F1607C
5C801606
84003000
C0090FE4
2
C006E9E4
84003000
C0FFF3B0
10
C0FFF3B0
32012010
8C811000
86003000
C0089760
80A1E078
3555200C
84003000
C006E9EC
84003000
C006EA54
2
C00708AC
84003000
C0FFF3E0
6
C0FFF3E0
9021631C
5C401610
320A2008
8C200000
84003000
C00708B4
1
C00708C4
35A5404C
1
C00708D8
35850038
0
FCCE74A8
3
0
----- End Script -----


III.	Patch Installation Script for use with SCU (Unix only) download utility:

Extract the following script to PATCH_V85S-4.TXT and execute it using SCU.

----- Begin Script -----
!
!Deallocate data buffers after use
!
run clcp
2
1
y
V85S
183
0
4
2
C0090FDC
84003000
C0FFF390
8
C0FFF390
32012010
8C811000
86003000
C0089760
82F1607C
5C801606
84003000
C0090FE4
2
C006E9E4
84003000
C0FFF3B0
10
C0FFF3B0
32012010
8C811000
86003000
C0089760
80A1E078
3555200C
84003000
C006E9EC
84003000
C006EA54
2
C00708AC
84003000
C0FFF3E0
6
C0FFF3E0
9021631C
5C401610
320A2008
8C200000
84003000
C00708B4
1
C00708C4
35A5404C
1
C00708D8
35850038
0
FCCE74A8
3
0
----- End Script -----




IV.	Patch Deletion Script for use with SCU (Unix only) download utility:

Extract the following script to PATCH_V85S-4_DELETE.WB_DATA and execute it 
using SCU.

----- Begin Script -----
! Deallocate data buffers after use delete (c) DEC 23-Feb-2001 !
2
V85S
4
----- End Script -----




V.	Patch file for use with SWCC Client's Update Controller Software feature. 

Transfer the attached file PATCH_V85S-4_INSTALL.WB_DATA to the Client host and specify
it in the 'File to load' box from the SWCC Update Controller Software screen
as selected via the 'Storage' menu option.

----- Begin swcc Script -----
! Deallocate data buffers after use install (c) DEC 23-Feb-2001 !
1
V85S
183
0
4
2
C0090FDC
84003000
C0FFF390
8
C0FFF390
32012010
8C811000
86003000
C0089760
82F1607C
5C801606
84003000
C0090FE4
2
C006E9E4
84003000
C0FFF3B0
10
C0FFF3B0
32012010
8C811000
86003000
C0089760
80A1E078
3555200C
84003000
C006E9EC
84003000
C006EA54
2
C00708AC
84003000
C0FFF3E0
6
C0FFF3E0
9021631C
5C401610
320A2008
8C200000
84003000
C00708B4
1
C00708C4
35A5404C
1
C00708D8
35850038
0
FCCE74A8
----- End swcc Script -----